How to Check Car Glass Dimensions?

1 Answers
SaraDella
07/29/25 4:39pm
Cannot be checked, you need to measure it yourself. 1. Size introduction: The length of the front windshield is generally about 145CM, with widths ranging from the smallest mini of 40CM to the largest Peugeot 5008's 105CM. 2. Model introduction: There are black characters on the glass indicating the model, which is the name given by the manufacturer to vehicles of the same type, brand, category, series, and body style. 3. Maintenance: Use dedicated or suitable wiper blades and replace them in time (usually once a year) to avoid scratching the front windshield; always keep the front windshield clean. If there are debris stuck, try not to use the wipers to remove them. Instead, use a towel or other tools to carefully remove them.
Was this review help?
3
0
Share
More Forum Discussions

What is the model positioning of the Senova X25?

The model positioning of the Senova X25 is a compact SUV. This vehicle is a model under BAIC Group, featuring a 5-door, 5-seat body structure. The dimensions are 4110mm in length, 1750mm in width, and 1583mm in height, with a wheelbase of 2519mm. The front and rear tire specifications are 205/50R16, and it comes with a non-full-size spare tire. In terms of power, the Senova X25 is equipped with a 4-cylinder, 1.5-liter, 116-horsepower naturally aspirated engine, paired with a 4-speed automatic transmission. The cylinder head and block are made of aluminum alloy. For suspension, the Senova X25 utilizes a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
8
2
Share

What Are the Causes of Idle Vibration During Cold Start?

Reasons for idle vibration during cold start: 1. Excessive carbon deposits in the engine, dirty throttle body, or excessive carbon buildup in the fuel injectors, leading to an overly lean air-fuel mixture during cold start and making it difficult to start; 2. Issues with the ignition system—after prolonged use, the spark plug's ignition gap and timing control may vary, but the ECU cannot detect this deviation, resulting in some cylinders producing less power and causing vibration; 3. After extended engine use, the clearance between each cylinder liner and piston may vary, and without proper oil lubrication during cold start, larger clearances allow some high-temperature gases to leak, reducing power output; 4. Unstable fuel pressure; 5. Faulty coolant temperature sensor—when it fails, the ECU cannot receive the signal to provide a richer air-fuel mixture and can only supply a leaner mixture to the engine.
10
2
Share

What are the tire specifications of the Volkswagen Santana?

The tire specifications of the Volkswagen Santana are 175/70R14 and 175/70R15, equipped with Hankook OPTIMO K415 tires in the size of 185/60R15. The spare tire is a non-full-size tire with the specification of 175/70R14. The Santana is a compact car under the Volkswagen brand, featuring a 4-door, 5-seat sedan body structure. Its dimensions are 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. In terms of suspension, the Santana is equipped with a MacPherson strut independent suspension at the front and a compound torsion beam non-independent suspension at the rear.
11
5
Share

What does the car door button mean?

door button in a car refers to the door. Different positions indicate different meanings, as follows: 1. The door button inside the car on the sunroof is used to open or close the sunroof. 2. On the front panel of the car, it is the interior reading light. Press to unlock the car, and the light turns on; after locking the car, the light turns off. Additional information is as follows: 1. Press the door button, then unlock the car, open the door, sit in the car, and after closing the door, the interior reading light will turn on. 2. Unlock the car, and the light will turn on. After a certain period, without pulling the handle, lock the car, and the light will turn off.
16
0
Share

What are the advantages and disadvantages of aluminum alloy car bodies?

Advantages and disadvantages of aluminum alloy car bodies are: 1. The advantages of aluminum alloy include light weight, strong oxidation resistance, and high plasticity. It can be cold-formed and processed, and slightly deformed frames can be easily restored to their original shape. 2. Aluminum alloy car bodies are more expensive. Compared to steel car bodies, aluminum alloy bodies are more brittle and difficult to repair through sheet metal and painting after collisions, resulting in very high maintenance costs. 3. Due to low hardness and poor wear resistance, parts are more prone to wear and tear. It is not suitable for frequently moving parts. 4. The excessive plasticity of aluminum alloy means it cannot provide better protection for occupants in the event of an accident.
17
1
Share

What is the reason why the Focus does not move when reversing?

Here are the reasons why the Focus does not move when reversing: 1. The gear is not fully engaged: It may be because the gear is not actually engaged, or because the vehicle's handbrake is not released, or because the synchronizer in the transmission is stuck. First, check if the gear is fully engaged. If there are no operational issues, it may need to be inspected. 2. Fault issues: The problem could be due to a leak in the reverse gear oil circuit, a fault in the reverse gear and high gear clutch, or an issue with the brake. When encountering such problems, it is best to send the vehicle for inspection immediately to minimize damage to the transmission. Normally, when shifting into reverse gear, it is important to ensure the vehicle is completely stopped before engaging reverse gear, otherwise it can easily cause the vehicle to shake after shifting into reverse.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.