How to Check BMW VIN Number?

How to Install Motorcycle Sequential Turn Signals?

First, locate a suitable place to fix the turn signals. If there isn't one, you'll need to drill holes yourself. After drilling and fixing, thread the wires through the drilled holes. Connect yellow to yellow, pink to pink, green to green-white. The red wire connects to the battery's positive line, and the black wire is the voltage regulator line. After connecting, use a multimeter to measure the voltage by testing the battery's positive and negative terminals. Use a 12V 20A0 battery to replace the original motorcycle battery. This can extend the battery's working time and prolong the usage of the motorcycle's electrical equipment, lighting, and electric start system.

12

1

Share

How to Change BMW Key Language from English to Chinese?

Adjust through the car's multifunction steering wheel. First, locate the multifunction steering wheel, the key with an LCD display, and various auxiliary functions. Click the SET button on the left side of the steering wheel. Press the OK button on the multifunction steering wheel for five seconds. The language settings option will appear on the display screen. Select the Mandarin Chinese option, and you will notice the display no longer shows English. The vehicle information display function allows you to check the vehicle's status, doors, remaining fuel mileage, and unauthorized door opening alerts on the key's display screen at any time.

14

4

Share

What are the steps for disassembling and assembling a Jetta engine?

Remove the fuel pump fuse, start the engine to release fuel pressure, and disconnect the negative battery cable. Disassemble the intake pipe assembly, remove the upper intake manifold assembly, and take off the lower intake manifold assembly to prevent debris from entering the passages. Remove the heated oxygen sensor, detach the exhaust pipe and gasket from the mounting bracket, and clean the exhaust manifold sealing surface to check for holes, damage, or cracks. Remove the protective plate to expose the generator belt, take off the belt, remove the engine crankshaft output pulley, and detach the triangular fixed bracket on the engine side. Loosen the cylinder head cover bolts in a diagonal sequence, remove the cylinder head cover, take off the valve cover gasket (ensuring its integrity), and then remove the cylinder head.

7

5

Share

What are the steps to remove the dashboard of a Volkswagen Polo?

Pry off the black trim frame around the head unit, being careful not to use excessive force to avoid breaking the frame. Remove the fixing screws around the head unit, taking care not to drop the screws into the gaps of the center console. Disconnect the wiring harness at the back. Connect the wiring harness of the head unit to the new head unit. These are specialized connectors, so there's no need to worry about incorrect connections. After installing the new head unit, power it on for testing. Once the test is successful, tighten the screws to secure it, and finally reattach the black trim frame.

15

5

Share

How to Remove and Replace a Seat Belt Buckle?

First, adjust the seat and remove the four fixing bolts on the front and back of the seat. Locate the wiring of the car seat and disconnect the sensor wire of the seat belt buckle. Remove the seat cushion, take off the seat airbag, then remove the bolt fixing the seat belt, and finally take out the seat belt buckle slot. Remove the sensor inside the seat cushion, install the new seat belt buckle slot onto the seat, connect the wiring, and tighten the bolts. Install the weight sensor and the new retractor onto the seat, and tighten them with a wrench.

20

3

Share

What is the method to reset the maintenance light on a Mercedes-Benz W221?

Turn the ignition switch to the first position. Simultaneously press and hold the 'OK' button (S110s6) on the multifunction steering wheel and the 'Answer/End' button on the right side for about 5 seconds. Select 'ASSYSTPlus workshop' and confirm by pressing the 'OK' button (S110s6). Use the 'Forward/Backward' button (S110s1) to select 'Service Performed' and confirm by pressing the 'OK' button (S110s6). Choose 'Complete (Full) Service' or 'Individual'.

6

1

Share

How to Check BMW VIN Number?

How to Install Motorcycle Sequential Turn Signals?

How to Change BMW Key Language from English to Chinese?

What are the steps for disassembling and assembling a Jetta engine?

What are the steps to remove the dashboard of a Volkswagen Polo?

How to Remove and Replace a Seat Belt Buckle?

What is the method to reset the maintenance light on a Mercedes-Benz W221?

How to Reset the Maintenance Reminder Light on a Mercedes-Benz?

How to adjust the dashboard brightness of Mercedes-Benz V260?

What are the reasons for the sudden silence of the entire audio system in the Haval H6?

How to Clean a Dirty Mercedes Radar Sensor?