···
Log in / Register

How to Charge the Changan Benben at Home?

4 Answers
LaFinn
07/30/25 12:59am

Turn off the engine, remove the battery from the car, and find a ventilated and shady place. Open the vent caps on the battery. Attach the red clip of the charger to the positive terminal marked with a plus sign, and the black clip to the negative terminal marked with a minus sign. Since it's a used battery, slow charging is required. Adjust the gear to 2, select a 12-volt power source, and monitor the current from the meter. Plug in the charger, turn on the switch, and start charging the battery. Generally, the charging time should not exceed 12 hours.

Was this review help?
15
2
Share
VanEthan
08/15/25 6:28am

I've been driving my Changan Benben for several years, and charging at home is super convenient. I just use the portable charging cable that came with the car and plug it into a standard 220V household socket. The socket must be a 16A one with a grounding wire, as a regular 10A socket can easily get damaged. I have a dedicated socket installed in my garage, and every night after parking, I plug it in. It takes about 6-8 hours to fully charge, and the next day I'm ready to go with a full battery. The cost is extremely low—just a few cents per kilowatt-hour, and running 100 kilometers costs less than 10 yuan. If you don't have a dedicated socket, avoid using extension cords to prevent overheating risks. Alternatively, you can install a home charging station with higher power, but you'll need an electrician to set up the wiring, which costs a few hundred yuan. Also, pay attention to battery maintenance—avoid frequent fast charging to extend its lifespan. Overall, home charging is hassle-free and cost-effective, perfect for daily commuting.

Was this review help?
20
2
Share
Expand All
ElizabethFitz
10/20/25 4:33am

I recently got a Changan Benben, and charging at home is quite simple. The car comes with a charger that plugs into a standard 220V wall socket. It's best to use a 16A industrial socket, as regular household ones might not handle it well. During charging, the car's lights will turn on to show the progress. Typically, it takes about 7 hours to go from empty to full. I usually plug it in at night and unplug it in the morning. Safety first—make sure the socket is dry and the plug is securely inserted. The cost is very affordable, much cheaper than refueling. If you live in an apartment complex, check the circuit load and avoid using other high-power appliances simultaneously. Occasionally, I top up at public charging stations, but home charging is the most convenient. The whole process is quiet and doesn’t disturb the neighbors.

Was this review help?
1
3
Share
Expand All
AdalynnRose
12/03/25 5:05am

As an energy-saving advocate, I highly recommend the home charging method for the Changan Benben. Simply plug into a standard 220V household outlet to reduce your carbon footprint. The charging process produces zero emissions and supports scheduled charging, allowing you to charge during off-peak hours for greater cost savings. With a charging power of approximately 3.3kW, a full charge takes around 7 hours. It's recommended to use a dedicated socket to avoid potential hazards. The electricity cost is low, amounting to just a few cents per kilometer. For long-term use, maintain battery health by avoiding overcharging or leaving it fully charged overnight for extended periods. Home charging is both convenient and eco-friendly, making it ideal for urban living.

Was this review help?
5
2
Share
Expand All
More Forum Discussions

What is the general width of a car?

Width standard dimensions range from 1.6 meters to 1.8 meters. The actual considerations and variations in width are as follows: Practical considerations for width: Width primarily affects passenger space and flexibility. For passenger cars, if three seats arranged horizontally are required to have a spacious seating feel (mainly sufficient shoulder width), the car width generally needs to reach 1.8 meters. Due to safety requirements, the thickness of car door panels has increased, leading to a general increase in car width. Variations exist: It varies by car model, even the same car with different configurations, suspension stiffness, etc., all play a role. Generally, the length ranges between 3800mm to 4300mm, width between 1600mm to 1800mm, and height between 1400mm to 1600mm.
5
0
Share

What Detergent Should Be Used When Washing a Car?

Main car washing detergents include laundry detergent, dishwashing liquid, car wash soap, water wax, and scratch-free car wash products. The main classifications and steps for car washing are as follows: Main Classifications: Dishwashing liquid car wash; Laundry detergent car wash; Car wash soap, etc. Car Washing Steps: Dilute the car wash soap; Clean the car body surface, lift the wipers, first use a hose to draw water from the faucet and rinse the car body.; Clean the gaps; Dry the car body; Wipe the interior of the car, rinse the cloth with clean water, and wipe the central console, dashboard, steering wheel, gear shift, etc. in sequence. After wiping the central console and inner door handles, take out the floor mats for cleaning, and apply wax to the dashboard.
20
0
Share

Function of CAN Transceiver

CAN transceiver serves as the bridge connecting the CAN control system with the CAN bus network. What parameters should be considered when selecting a CAN transceiver? This article will provide an in-depth understanding of each parameter of the transceiver and its significance in practical applications. Depending on the CAN interface voltage of the controller, you can choose a CAN module powered by 3.3V or 5V. The normal input range for an isolated CAN module is VCC±5%, mainly ensuring that the CAN bus voltage remains within the typical range while also allowing the secondary CAN chip to operate near its nominal supply voltage. For standalone CAN transceiver chips, the VIO pin of the chip needs to be connected to a reference voltage matching the TXD signal level to align the signal levels. If there is no VIO pin, the signal level should be kept consistent with VCC. When using the CTM series isolated transceivers, it is necessary to match the TXD signal level with the supply voltage, i.e., a 3.3V standard CAN controller interface or a 5V standard CAN controller interface.
16
2
Share

Can a Vehicle Still Be Driven on the Road After Accumulating 12 Penalty Points?

Motor vehicles can still be driven normally. The main reasons and measures for continued driving are as follows: Main Reasons for Continued Driving: Traffic violation penalty points are assigned to the driver of the vehicle, not the vehicle itself. If a driver accumulates 12 penalty points within a scoring cycle due to driving a specific vehicle, the traffic police department will confiscate their driver's license. During the period of license confiscation, the driver is prohibited from operating any motor vehicle. Measures for Continued Driving: As for the vehicle itself, it will not be prohibited from being driven on the road simply because its driver has accumulated 12 penalty points. As long as there is a qualified driver, the vehicle can still be driven normally on the road.
12
0
Share

What Are the Reasons Why a Forklift Fails to Start?

Forklift fails to start may be due to reasons such as an empty fuel tank, damaged fuel or electrical circuits, or a blown fuse in the high-pressure pump solenoid valve. The basic introduction to forklifts and the main reasons for failing to start are as follows: Basic Introduction: A forklift, also known as a loader, is a type of earthmoving machinery widely used in construction projects such as highways, railways, buildings, hydropower, ports, and mines. It is mainly used for shoveling and loading loose materials like soil, sand, gravel, lime, and coal. It can also perform light shoveling operations on ores and hard soil. By replacing different auxiliary working devices, it can also be used for bulldozing, lifting, and handling other materials such as timber. Main Reasons for Failing to Start: A forklift may fail to start due to reasons such as an empty fuel tank, damaged fuel or electrical circuits, or a blown fuse in the high-pressure pump solenoid valve.
8
2
Share

Why does the dash cam automatically shut down right after startup?

Possible reasons include a faulty memory card, low battery, loose power connection, or software malfunction causing system lag. The specific causes are as follows: No memory card installed: Many dash cams may automatically shut down shortly after startup if no memory card is installed. If a card is installed, verify whether it is a Class 10 high-speed card. If not, replace it (this is highly relevant to the issue and should be prioritized). After confirming this, check again whether the battery is low. Faulty memory card: Due to prolonged use, memory cards can develop issues after repeated friction. In such cases, formatting the memory card on a computer usually resolves the problem. If it's a newly configured memory card, incompatibility might be the issue. Loose power connection: This is especially common when using a multi-port cigarette lighter adapter. When the power connection becomes loose, the dash cam will automatically switch to its built-in battery, which typically doesn't last long. As a result, the dash cam may appear to be on but is found to be off when checked later.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.