How to Charge the BYD Tang DM Properly?

Adjust the Rearview Mirror to See the Front or Rear Door Handle?

Adjust the rearview mirror to see the rear door handle. Below are the adjustment methods for different rearview mirrors: 1. Central rearview mirror: Adjust the left and right positions so that the left edge of the mirror just cuts off your right ear in the reflection, and adjust the up and down positions to place the distant horizon in the center of the mirror. 2. Left rearview mirror: Adjust the up and down positions to place the distant horizon in the center, and adjust the left and right positions so that the car body occupies 1/4 of the mirror's area. 3. Right rearview mirror: Since the driver's seat is on the left, it is not easy for the driver to see the right side of the car. Additionally, due to the need for roadside parking sometimes, when adjusting the up and down positions of the right rearview mirror, the ground area should be larger, occupying about 2/3 of the mirror's area.

6

5

Share

Why can't the steering wheel return to center completely?

Steering wheel misalignment is due to: The reason why the steering wheel cannot be fully adjusted after wheel alignment may be improper toe adjustment or incorrect front wheel deflection angle. Wheel alignment is based on the four-wheel parameters of the vehicle, adjusting them to ensure good driving performance and certain reliability. The steering wheel, steering knuckle, and front axle of a car have a certain relative installation position, which is called steering wheel alignment, also known as front wheel alignment. Introduction to wheel alignment: Front wheel alignment includes four parts: caster angle, camber angle, kingpin inclination angle, and toe angle. Rear wheel alignment includes camber angle and toe angle. Thus, front wheel alignment and rear wheel alignment are collectively referred to as wheel alignment, also known as four-wheel alignment. The purpose of wheel alignment is to maintain the car's stability in straight-line driving and turning, and to reduce wear and tear on tires and steering components during driving.

4

0

Share

What maintenance should be done at 25,000 kilometers for a car?

At 25,000 kilometers, the maintenance for a car includes changing the engine oil, oil filter, air filter, cabin air filter, and fuel filter. It also involves checking the tread depth, tire pressure, and wear condition of the tires, with a wheel alignment performed if necessary. The throttle body and idle speed valve should be inspected for excessive dirt and cleaned if needed. The condition of the spark plugs should be checked and replaced if necessary. For vehicles that have reached 25,000 kilometers, the maintenance should also include inspecting the power steering, braking system, and automatic transmission. Tests should be conducted to ensure the braking force, gear shifting, and steering are functioning properly. Additionally, the levels of various fluids should be checked to ensure they are at the standard positions, the tightness of the chassis bolts should be verified, and the lighting system should be inspected for proper operation.

16

4

Share

What is the function of the handbrake?

The handbrake, also known as the parking brake, functions by providing resistance to the car when parked, locking the drive shaft or rear wheels to prevent the vehicle from automatically sliding when left unattended on flat ground or slopes, thereby avoiding traffic accidents. Precautions for using the handbrake are as follows: 1. Do not pull the handbrake too tightly: Many modern cars have spring-loaded handbrakes with multiple positions. The higher you pull the handbrake, the more tension is applied to the spring. Therefore, pull it just enough to prevent the car from moving, and avoid pulling it to the maximum position, as this helps extend the handbrake's lifespan. 2. Always release the handbrake when starting the car: Remember to press the button and ensure it is fully lowered. Many people forget to release the handbrake when starting the vehicle, which can cause damage to the handbrake.

20

5

Share

What is the engine model of the Audi S4?

Audi S4 is equipped with the EA839 model V6 engine, with a maximum power of 260kW, maximum horsepower of 354Nom, and maximum torque of 500Nom. Seeing the EA model prefix, it's not hard to deduce that Audi's 3.0T engine actually comes from Volkswagen. The car has a length, width, and height of 4770mm, 1847mm, and 1401mm respectively, with a wheelbase of 2825mm. The body type is a 4-door, 5-seater sedan, equipped with an 8-speed automatic transmission and a 3.0T V6 turbocharged engine, delivering a maximum horsepower of 354ps and a maximum torque of 500nm.

13

2

Share

What is the solution for the overheating at the accelerator pedal of the Excelle GT?

Install a valve on the rubber hose connector of the engine's heater core water pipe. Close the valve during summer to stop the coolant in the heater core. It participates in the engine coolant circulation, so it gets hot. The normal temperature is around 85 degrees. If the temperature is too high, do not wrap it with insulating materials to prevent fire hazards.

1

4

Share

How to Charge the BYD Tang DM Properly?

Adjust the Rearview Mirror to See the Front or Rear Door Handle?

Why can't the steering wheel return to center completely?

What maintenance should be done at 25,000 kilometers for a car?

What is the function of the handbrake?

What is the engine model of the Audi S4?

What is the solution for the overheating at the accelerator pedal of the Excelle GT?

What causes the sudden braking when reversing a Mercedes-Benz E300L?

What brand of car is SMW?

What to Do If It Rains During a Driving Test?

Can You Start the Car If the Exhaust Pipe Is Submerged in Water?