How to charge the battery of Geely Vision X3?
2 Answers
The charging method for the Geely Vision X3 battery is: 1. Turn off the engine and remove the battery; 2. Open the vent caps on the battery; 3. Connect the red clamp of the dedicated charger to the battery positive terminal marked with a plus sign, and the black clamp to the battery negative terminal marked with a minus sign; 4. Adjust to the 2nd gear and select the 12-volt power source; 5. Plug in the charger, turn on the switch, and start charging. The Geely Vision X3 is a compact 5-door, 5-seat SUV with body dimensions of: length 4005mm, width 1760mm, height 1575mm, and a wheelbase of 2480mm. It is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 80 kW and a maximum torque of 142 Nm.
As an owner of the Geely Vision X3, I once had a dead battery and used a regular charger to recharge it. First, open the hood to locate the battery, connect the red wire to the positive terminal and the black wire to the negative terminal. Set the charger to low current mode, around 10 amps, and let it charge slowly for a few hours. Ensure good ventilation during charging and avoid smoking nearby, as the battery releases hydrogen gas. I believe prevention is key—avoid forgetting to turn off lights and check the battery voltage before starting the car. If it's below 12 volts, it needs charging. The Vision X3's battery is a lead-acid type, which can age easily if the car is left unused for long periods. So, I recommend starting the car once a month to let the alternator charge the battery. After charging, disconnect the charger first and then test the car. If it still doesn't start, check for other issues.
