How to Charge the Battery of a Gasoline Car?

1 Answers
VeraLee
07/25/25 12:12pm
There are different charging methods for gasoline car batteries depending on the situation. The specific charging methods are as follows: 1. If the car runs out of power due to discharge, you can use an external battery to start the car and let it idle for 30 minutes or keep it running without stalling. Then, use the car's built-in generator to charge the battery. Once fully charged, it can be used normally. 2. If the battery has been used before, you can charge it with a battery charger. Turn off the engine and remove the battery from the car. The principle of charging a car battery is that the voltage of the charger must be higher than that of the battery to enable charging. The greater the electromotive force difference between the two, the faster the charging speed and the larger the charging current. Car batteries are typically charged using a 24V charger.
Was this review help?
17
0
Share
More Forum Discussions

Can a driver's license renewal be handled by an agent?

Driver's license renewal after expiration can be handled by an agent: 1. If the driver's license has been expired for less than one year, renewal can be processed: You can authorize someone else to apply for the renewal at the vehicle management office of the local traffic police department where the license was issued, following the standard renewal process for expired licenses. 2. If the driver's license has been expired for more than one year but less than three years: It cannot be renewed by an agent. According to Article 123 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" issued by the Ministry of Public Security, the driver must personally pass the road traffic safety laws, regulations, and related knowledge test organized by the vehicle management authority before the driving qualification can be restored and a new license issued. 3. According to relevant provisions in Article 123 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" issued by the Ministry of Public Security: To authorize someone else to handle the renewal, the following documents must be submitted: a written authorization letter signed by the license holder, and the original and photocopy of the license holder's ID card.
1
4
Share

Can you change lanes with a dashed line plus a solid line?

Dashed line plus a solid line allows lane changes. On a road section with one solid line and one dashed line, overtaking is not allowed, but lane changes can be made from the dashed line side. Traffic Safety Law stipulates: Vehicle drivers within the territory of the People's Republic of China shall comply with the Road Traffic Safety Law and these regulations. The registration of motor vehicles is divided into initial registration, modification registration, transfer registration, mortgage registration, and deregistration. Precautions for changing lanes: When encountering situations where changing lanes is not allowed during driving, follow the traffic flow. While continuing to drive with the traffic flow, pay special attention to other traffic conditions and carefully return to the original planned route. When changing lanes to avoid obstacles, perform the lane change appropriately in advance to prevent vehicles in adjacent lanes from affecting the lane change, which could lead to sudden braking or forced lane changes, resulting in collision accidents. When changing lanes, avoid abruptly turning the steering wheel into the adjacent lane to prevent collisions with suddenly appearing vehicles or vehicle skidding due to slippery road surfaces. Lane changes should not be too slow; driving for long distances while straddling the line may affect other vehicles.
3
1
Share

Where is the rearview mirror folding switch for the Haval H6?

The rearview mirror folding switch for the Haval H6 is located within the multifunction adjustment knob on the driver's side door. Below is some relevant information about the Haval H6: 1. Power Evolution: Equipped with a 1.5GDITEVO engine, the maximum torque output range has been expanded to 1400-3600 rpm, paired with a second-generation 7DCT transmission, achieving a comprehensive transmission efficiency of up to 95.6%. 2. Safety Evolution: Advocating the concept of 'safety without hierarchy,' it comes standard with a body made of 71.61% high-strength steel, hot-formed steel integrated door frames, and six airbags, with the hot-formed steel strength reaching up to 2000 MPa. 3. Intelligence Evolution: Featuring thousands of intelligent upgrades, it integrates cutting-edge smart technologies, including full-vehicle FOTA updates, support for ultra-L2 level autonomous driving, and 22 intelligent driving assistance functions such as full-scenario AEB automatic emergency braking, 50-meter full-automatic tracking reverse, and smart evasion.
9
2
Share

What does coolant level low mean?

coolant level low means the antifreeze level is too low. It usually indicates an issue with the car engine. Solutions for car engine malfunctions: Read the fault codes, refer to the fault code table for each vehicle model to identify the cause of the fault, and resolve it. If the fault code is correct and the engine can start, inspect the air conditioning valve and its wiring, air ducts, air filter, etc. Functions of car antifreeze: In cold winter, it prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block. In high summer temperatures, it effectively prevents boiling and avoids overheating. Car antifreeze plays a significant role, directly affecting the car's performance and lifespan. Many people think antifreeze is only used in winter, but it should be used year-round. Antifreeze also has anti-corrosion properties. Since the engine's cooling system includes several metals such as steel, aluminum alloy, cast iron, copper, and solder used in radiator welding, the cylinder block and cylinder head are usually made of cast aluminum or cast iron, and the radiator is mainly made of copper and brass, antifreeze must protect all these metals during long-term contact. Using deionized water and appropriate additives can prevent various types of corrosion.
17
1
Share

What Causes Stalling While Practicing Driving?

There are two main reasons for stalling while practicing driving: stalling at startup and stalling during driving. Stalling at startup is mainly caused by releasing the clutch too quickly. Stalling during driving is primarily due to a mismatch between speed and gear. Here are solutions to prevent stalling: Stalling at Startup: Press the clutch pedal fully and shift into first gear. Slowly release the clutch until you feel the car shaking at the semi-engaged state. Then release the handbrake, keeping your left foot steady without moving. Wait for the car to move for one or two seconds before fully releasing the clutch, then accelerate and shift gears. Stalling During Driving: Stalling during driving usually occurs when braking suddenly at a high gear. This happens because the speed does not match the gear. The correct approach is to press the clutch pedal fully before braking. Once the car is about to stop, shift to neutral and apply the handbrake. Precautions After Stalling: If the car stalls while driving, press the clutch, shift to neutral, restart the engine, and then engage the gear. If possible, pull over to the side before restarting. If the engine stalls while driving on a highway, immediately turn on the hazard lights and left turn signal, observe the left lane, and use the car's momentum to pull over for inspection or contact a 4S shop for assistance.
1
2
Share

Where should the steering wheel align with the dashed line in Subject 2?

When reversing into the garage at the starting point in Subject 2, align the steering wheel with the third dashed line. Positioning: For left-side reversing into the garage in Subject 2, the optimal position is when the lower edge of the left rearview mirror is approximately 2-3 cm vertically from the sensor line, at which point you should turn the steering wheel fully to the right. Adjusting the vehicle: Adjust the seat and rearview mirrors. Start with right-side reversing into the garage. Ignite and start the car. At this point, the car at position A should be parallel to the seven-meter line. If the car is tilted, adjust it accordingly. Observing the rearview mirrors: Engage the reverse gear, release the handbrake, gently lift the clutch to move the car backward, and control the speed. Watch the left rearview mirror. When the right starting sensor line appears in the left rearview mirror (approximately when the lower edge of the left rearview mirror is about 2-3 cm vertically from the sensor line), turn the steering wheel fully to the right and keep it fully turned while continuing to move backward.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.