How to Change Transmission Fluid?

1 Answers
DelAubrey
07/30/25 12:24am
Transmission fluid replacement steps involve the gravity replacement method. Here are the detailed steps: 1. Start the engine to warm up the transmission to operating temperature: Add about 2 liters, start the vehicle, and check the transmission fluid level, ensuring it is between the two small holes. 2. Remove the drain bolt: After confirming the fluid level is normal, lift the vehicle with a jack, then engage D and R gears, running each for one minute, and measure the transmission fluid level again. 3. Reinstall the bolt after draining the old fluid: The transmission fluid level will drop, and you only need to top it up again to between the two small holes.
Was this review help?
15
4
Share
More Forum Discussions

What is the fuel tank capacity of the Binrui?

The fuel tank capacity of the Binrui is 50 liters, which is the officially announced data. Owners who have purchased the Binrui can also check this information on the vehicle's configuration sheet. The Binrui uses 92-octane fuel, with a fuel consumption of 5.9 to 6.1 liters per 100 kilometers. A full tank of fuel can cover a distance of 820 to 847 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is designed to allow the fuel to expand when the temperature rises without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
11
1
Share

What does a cruiser motorcycle mean?

Cruiser motorcycles are essentially comfort-oriented "prince" bikes, a branch of traditional commuting motorcycles. Cruisers actually represent a leisurely riding posture, achieved through engines that favor mid-to-low torque output, allowing both the bike and rider to maintain a relaxed state in the wind. This stands out distinctly in a motorcycle industry that emphasizes speed and complex, advanced technologies. The common features of cruiser motorcycles include a lower seat height, though this isn't primarily due to the bike's design. The main reason is the pursuit of a comfortable riding posture, where the footpegs are positioned forward, and the gear shift pedal is also placed in front of the engine. Depending on the type of handlebars installed, riders can control whether they sit upright or lean forward. Additionally, lower and shorter handlebars are referred to as "drag bars," and many lack risers, requiring them to extend forward a certain distance. Common cruiser motorcycle models include Indian Motorcycles, Honda Rebel, Yamaha Royal Star, Kawasaki Vulcan, Triumph's California, Bobber, and Rocket 3 series, among others. Cruisers also have subtypes, such as Bobbers, Choppers, Trackers, Scouts, Tourers, and power cruisers. Examples include Yamaha's V-MAX, Harley-Davidson's V-Rod series, Ducati's Diavel, and the all-new Triumph Rocket 3.
1
1
Share

How soon can I take the exam after completing Subject 1?

Subject 1 requires a total of 12 hours of study time, which is 720 minutes. You can study up to 4 hours per day. This includes 4 hours of on-site theoretical lessons and 8 hours of online self-study. Once you meet the requirements, you can take the exam. Therefore, the fastest you can complete the study time is in 3 days, after which you can schedule the Subject 1 exam. The exam application will be processed within 24 hours after scheduling. Subject 1 exam content: The exam questions mainly consist of road traffic rules, traffic signals, traffic safety violations and accident handling, regulations on the application and use of motor vehicle driver's licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules. Subject 1 retake requirements: If you fail the exam, you can retake it once. If you do not take the retake or fail the retake, the exam process will be terminated, and you will need to reschedule the exam. Subject 1 exam duration: The total exam time is 45 minutes, with a total of 100 questions, including true/false and multiple-choice questions. The maximum score is 100, and a passing score is 90. The exam questions are randomly selected and combined by the computer driver exam system according to the proportion specified in the motor vehicle driver's license work regulations.
18
2
Share

C1 Driver's License Review Period?

C1 driver's licenses do not require annual review, but they must be renewed within 90 days before the expiration date. The initial C1 driver's license is valid for 6 years, with no need for annual review during this period. The second renewal results in a validity period of "10 years", and the third renewal results in a "permanent" validity period. Below is more information about driver's licenses: 1. Handling of driver's licenses expired for less than one year: Driving with a driver's license that has exceeded its validity period for less than one year will result in a fine of 1,000 yuan for the driver according to the "Road Traffic Safety Law of the People's Republic of China" if discovered. However, within one year of expiration, the driver can still renew the license at the traffic management department, but a fine of 200 to 500 yuan will be imposed for "failing to participate in the review on time". 2. Handling of driver's licenses expired for one to three years: If the license is not renewed within one to three years after expiration, the license will be in a "revocable but recoverable" status. The driver must pass a legal exam at the vehicle management office to renew the license. Driving during this period will be considered unlicensed driving, and insurance companies will not cover any accidents. 3. Handling of driver's licenses expired for more than three years: If the license is not renewed for more than three years after expiration, it will be revoked, and the driver will need to retake the driver's license exam.
12
1
Share

Is the Envision available in the United States?

The Envision is available in the United States, and the American version is similar to the Chinese version, with only minor differences. To some extent, the Envision, like Volkswagen's Lavida and other models, is a "China-specific vehicle" jointly developed by General Motors and SAIC. The Envision is a new-generation strategic model for General Motors globally, with exterior design inspired by the ENVISION Vision concept car, positioned as a midsize SUV. In terms of dimensions, the Envision measures 4686mm in length, 1839mm in width, and 1691mm in height. It offers engine options including a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine.
7
3
Share

Where is the OBD interface located on the Changan Shenqi F30 pickup truck?

The OBD port of the Changan Shenqi F30 pickup is located on the right side of the battery in the engine compartment. As an interface for connecting to automotive diagnostic computers, the OBD port allows for the inspection and even repair of certain vehicle faults. By modifying the internal data of the vehicle's computer, it can also reveal some hidden vehicle functions. Here is a related introduction to OBD: OBD, as an abbreviation for a proprietary term, stands for On-Board Diagnostics, which means an onboard automatic diagnostic system in Chinese. This system can monitor the working conditions of the engine's electronic control system and other functional modules of the vehicle in real-time during operation. The useful information obtained from the system's self-diagnosis can assist in vehicle maintenance and repair. Technicians can use the vehicle manufacturer's specialized instruments to read fault codes, enabling quick fault localization for vehicle repairs and reducing manual diagnostic time.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.