How to Change the Transmission Oil for Mercedes-Benz GL350

How to Replace the Maintenance-Free Rear Wheel Oil Seal of Auman?

Loosen the drive shaft screws and use a screwdriver to remove the oil seal. Process the oil seal seat, apply butter or red glue to the outer diameter of the new oil seal, and gently tap it in diagonally. Install the drive shaft screws, check the amount of gear oil, and the oil seal replacement is successfully completed. Apply sealant to the groove on the outer shell of the new oil seal. It is best to use a special socket to press against the inner groove of the oil seal and tap it in. Use a special removal tool to clamp the universal joint fork of the main gear and tighten the lock nut with a torque wrench. Car oil seals are one of the most commonly used accessories in automotive maintenance.

17

4

Share

What to Do If You Forget to Bring Your Vehicle License When Stopped by Traffic Police?

Solutions for forgetting to bring the vehicle license when stopped by traffic police: Provide the electronic vehicle license and driver's ID card to the traffic police. According to China's "Road Traffic Safety Law," drivers must carry their driving license with them while driving. Otherwise, they will be fined 50 RMB and receive 1 demerit point, and the vehicle may even be impounded. With the "electronic driving license," you can travel without the original copy, and showing the electronic license will not result in penalties. The following is an introduction about the vehicle driving license: 1. Definition of a motor vehicle driving license: It refers to the legal certificate issued by the management department after the applicant, who is legally allowed to learn to drive a motor vehicle, has mastered traffic regulations and driving skills and passed the examination. 2. Examination subjects for the motor vehicle driving license: Include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).

11

0

Share

What are the consequences of a car being uninsured?

The biggest risk of a car being uninsured is that the passengers and the vehicle itself are not protected, and the consequences arising from the lack of insurance must be borne by the car owner. Here are some details about the consequences of a car being uninsured: 1. Safety Concerns: The safety of passengers is also not guaranteed. Therefore, failing to insure the vehicle as required by the compulsory motor vehicle traffic accident liability insurance is an illegal act. Traffic authorities will not only impound the vehicle but also impose a fine of twice the insurance premium. 2. Legal Regulations: If the compulsory traffic insurance is not in effect, according to Article 39 of the "Regulations on Compulsory Motor Vehicle Traffic Accident Liability Insurance," the public security department will impound the vehicle and impose a fine of twice the minimum insurance premium for the liability limit.

8

1

Share

What is the Auto Start-Stop Indicator in Cars?

The auto start-stop indicator button in cars features a circle with an 'A' inside and the letters 'OFF' below it. Here is some information about the auto start-stop indicator: 1. Mode: It is enabled by default. The auto start-stop symbol includes a cross. To deactivate the engine's auto start-stop function, simply press the auto start-stop button. The function will be enabled by default again the next time the car is started. 2. Application Scope: Engine start-stop technology is an advanced system that automatically controls engine shutdown and ignition. When the engine is in a brief dormant state, it achieves fuel savings and emission reduction. The engine start-stop function is suitable for urban traffic scenarios, such as waiting at traffic lights or during traffic congestion.

9

3

Share

What lights should be used at a straight intersection?

When driving straight through an intersection at night, you should alternately use high and low beams to alert pedestrians. Here are some guidelines on light usage: 1. Regulations: During nighttime when streetlights are on, or when driving under low visibility conditions such as fog, rain, snow, dust, or hail, you must turn on the headlights, position lights, and rear lights. When turning, changing lanes, overtaking, making a U-turn, or pulling over, you should activate the turn signal 100 to 50 meters in advance. 2. Precautions: There are clear regulations on light usage. Failure to comply with these rules will result in a 1-point penalty. When a motor vehicle passes through an intersection controlled by traffic signals and turns left, the turn signal must be activated, and low beams should be used when driving at night. When a following vehicle is driving close to the vehicle in front in the same direction, high beams should not be used.

7

0

Share

Where is the rearview mirror heating switch for Audi A6L?

The rearview mirror heating power switch for the Audi A6L is located on the driver's side door panel, featuring a fan-shaped upward arrow. Simply press this button to activate the rearview mirror heating function. This feature is particularly useful during rainy or snowy weather, as the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping and thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—just rotate the knob to turn it on. The other is located on the air conditioning control panel, where pressing the heating button activates it. No manual angle adjustment is required, as the driver's side has adjustment buttons. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly raises the temperature to a fixed level, typically between 35-60 degrees Celsius, within minutes. Heat is then emitted from both left and right rearview mirrors. Simultaneously, due to the temperature rise and evaporation, water droplets on the mirror surface shrink, and fog gradually dissipates, clearing the mirror of frost and mist. However, in heavy rain, its effectiveness may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. Ensure the car is running when using this function to avoid draining the battery, which could prevent the car from starting. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open the side windows slightly to allow air exchange between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also use warm air to defog the mirrors.

5

Share

How to Change the Transmission Oil for Mercedes-Benz GL350

How to Replace the Maintenance-Free Rear Wheel Oil Seal of Auman?

What to Do If You Forget to Bring Your Vehicle License When Stopped by Traffic Police?

What are the consequences of a car being uninsured?

What is the Auto Start-Stop Indicator in Cars?

What lights should be used at a straight intersection?

Where is the rearview mirror heating switch for Audi A6L?

How to Open the Front Hood of Auman GTL?

Differences between Mobil Gold and Mobil Silver?

Can Cars Play FLAC Files?

What does the 'mode' on a car's air conditioner mean?