How to Change the Name on Driver's License and Vehicle Registration After a Name Change?

4 Answers
LeCarmen
07/29/25 7:28pm
When you have changed your name, you need to go to the vehicle management office to update the name on your driver's license. The place to handle this is the local vehicle management office where the vehicle owner is registered, to complete the license replacement procedure. In some areas, the vehicle management office requires an online appointment in advance, so you should manage your time well.
Was this review help?
8
5
Share
KylieLynn
08/14/25 2:21pm
I encountered this issue last year and specifically researched the processing procedures. You need to handle two documents separately at the vehicle management office: first, the driver's license. Remember to bring the original household registration booklet and ID card, which must include records of your previous name, along with your original driver's license and a one-inch white background photo. Fill out the form to reissue the license, and the fee is about 20 yuan. For the vehicle license, bring the vehicle registration certificate and your ID card. The staff on-site will verify the chassis number. A key reminder is to make an appointment in advance on the Traffic Management 12123 app to avoid waiting in line for two hours. After completing the process, remember to check the information on the new documents—I once experienced a situation where the staff entered the wrong ID number. Also, after the name change, remember to update your vehicle insurance policy to avoid discrepancies in claims due to name mismatches.
Was this review help?
1
4
Share
Expand All
MacDaniela
08/14/25 2:22pm
I just went through this last month, so let me tell you the easiest way. For driver's license changes, you need five things: the original new ID card, household register showing previous name, old driver's license, three photos, plus a photocopy of your ID. The DMV will take new photos on-site for their system - don't wear white clothes for the photo. Changing the vehicle license is simpler, just bring the green vehicle registration book - no need to drive there for inspection. The whole process took me 40 minutes with a 16 yuan fee. Avoid Mondays and month-ends when it's crowded. Don't forget to update your ETC device information within three months after the change, or you might get stopped on highways.
Was this review help?
18
0
Share
Expand All
LaRowan
10/15/25 5:29am
Changing the two certificates after a name change is actually not difficult. For the driver's license, go to the local vehicle management office to get a form and apply for a replacement. You need to submit the original ID card, original household registration booklet, and photos, with a fee of 10 yuan. For the vehicle license change, you need to bring the vehicle registration certificate. Both require a name change proof from the public security authority. Be sure to check the local vehicle management office's service hours, as some places also operate on Saturday mornings. It's recommended to call and confirm the list of required materials in advance. I once encountered an additional requirement to bring the vehicle purchase tax certificate. After completion, the old certificates will be taken back.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on the JAC Refine S3?

The method to reset the maintenance light on the JAC Refine S3 is: turn off the ignition switch, press and hold the adjustment lever at the lower right of the instrument panel, and then turn on the ignition switch to reset. The functions of the maintenance light are: 1. Record the mileage of important components; 2. Remind the owner to perform maintenance. The JAC Refine S3 is a compact SUV with body dimensions of: length 4345mm, width 1765mm, height 1640mm, wheelbase 2560mm, and a fuel tank capacity of 45L. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kW and a maximum power speed of 6000rpm.
19
1
Share

What colors are available for the Geometry A car?

Geometry A car comes in the following colors: 0° White, 11° Silver, 18° Gold, 26° Blue, and 100° Red. The Geometry A is a pure electric compact car with the following body dimensions: length 4736mm, width 1804mm, height 1503mm, wheelbase 2700mm, and a trunk capacity of 430L. It uses 205/60R16 tires. The car is equipped with a front-mounted ternary lithium battery, with a total motor power of 120kW and a total motor torque of 250Nm. It is paired with a fixed gear ratio transmission and features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
6
3
Share

How to Set One-Touch Up/Down for the Avalon?

The method to set one-touch up/down for the Avalon is: 1. Start the vehicle, press down or lift the button to the first position, and release when reaching the desired position; 2. Press or lift the button firmly to the second position for automatic rising or descending. The Avalon is a mid-size sedan with body dimensions of length 4975mm, width 1850mm, height 1450mm, a wheelbase of 2870mm, and a fuel tank capacity of 60 liters. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 154kW at 6600rpm and a maximum torque of 250Nm.
2
5
Share

How to Replace Brake Pads with an Electronic Parking Brake?

Electronic parking brake replacement of brake pads method is: 1. Use a jack to lift the front part of the car; 2. Use tools to remove the tire; 3. Unscrew the caliper screws, remove the damaged brake pads and replace them. The electronic parking brake is a technology that achieves parking braking through electronic control. The working principle of the electronic parking brake is: 1. Parking is achieved through the friction clamping between the brake shoe and the brake hub or between the friction plate and the brake disc; 2. The control method replaces the original manual operation and mechanical linkage with electronic buttons and motors. The full name of this system is the electronically controlled mechanical parking brake system.
19
3
Share

Do Automatic Headlights Need to Be Turned Off After the Engine Is Off?

Automatic headlights do not need to be turned off after the engine is off. The method to activate automatic headlights is: adjust the combination switch of the car lights to the auto position. The function of automatic headlights is: when the light becomes dim during driving, the headlights will automatically turn on, and when the light becomes bright, they will automatically turn off. The working principle of automatic headlights is: the photosensitive sensor forms a voltage signal based on changes in external light, which is fed back to the automatic headlight control module. After data analysis, it determines whether the lights should be turned on. The maintenance methods for automatic headlights are: 1. Regularly check the lamp cover to avoid water droplets; 2. Prevent impact from foreign objects.
9
5
Share

How to Adjust the Rearview Mirror of the Tiguan?

The method to adjust the rearview mirror of the Tiguan is: Press the circular button next to the door corresponding to the rearview mirror, then adjust the mirror up, down, left, or right as needed. The functions of the rearview mirror are: 1. To prevent traffic safety accidents and ensure personal safety; 2. To expand the driver's field of vision. The Tiguan is a compact SUV with the following dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and a fuel tank capacity of 63 liters. It is equipped with a 1.8T turbocharged engine, with a maximum power of 118kW and a maximum power speed range of 4500 to 6200 rpm.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.