How to Change the Manual Transmission Fluid of a Cruze?

[McKevin]

The method for changing the manual transmission fluid of a Cruze is as follows: 1. Lift the car and locate the inspection hole screw of the transmission, then remove it; 2. Find the drain plug and remove it; 3. Pour the transmission fluid into the transmission fluid filling tool bucket; 4. Connect the tube to the inspection hole and manually pump the fluid until it overflows from the inspection hole, indicating it is sufficiently filled, then tighten the screw. The Cruze is a compact sedan launched by Chevrolet, with body dimensions of 4666mm in length, 1807mm in width, 1460mm in height, and a wheelbase of 2700mm. The side profile of the Cruze is made three-dimensional through the use of lines, presenting a low-front and high-rear stance that conveys a sense of dynamic motion.

[VonSophie]

As a friend who frequently works on cars, changing the manual transmission fluid is actually not difficult to understand. First, drive the car onto a lift or find a flat slope to jack it up securely to avoid injury. After warming up the engine for a few minutes, the fluid will flow faster when it's heated. There's a screw hole at the bottom of the transmission called the drain port—use a wrench to slowly loosen it, and the old black fluid will drain out. Place a large bucket underneath to catch it and avoid spills. Once the fluid is drained, tighten the screw and clean the port. When replacing the fluid, make sure to buy the correct type—the Cruze manual transmission typically uses 75W-90 GL-4 fluid. Avoid using the wrong type, as it can damage components. When refilling, use a fill pump to pour the new fluid through the top port, being careful not to go too fast. Fill until the fluid overflows, then reinstall the plug. Test-drive by shifting through a few gears to ensure smooth operation. Remember to change the fluid every 40,000 kilometers to maintain transmission health and extend the car's lifespan. Doing it yourself can save hundreds in labor costs—just prepare tools like rubber gloves and a wrench.