How to Change the Jurisdiction of a Driver's License?

1 Answers
MacXavier
07/29/25 12:24am
Methods for changing the jurisdiction of a driver's license: 1. Bring your ID card, driver's license, and photos to the Vehicle Management Office of the Municipal Public Security Traffic Police Detachment for processing; 2. At the Vehicle Management Office, fill out the motor vehicle driver's license application form, and submit the original and photocopies of your ID card and driver's license to the handling officer at the window for review; 3. Once approved, a new license will be issued. In some places, you may be asked to come back to collect it after ten days. The full name of the driver's license is the motor vehicle driver's license, also known as a driving license, which is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle recklessly may lead to traffic accidents. Generally, individuals cannot drive on the road without a license.
Was this review help?
13
0
Share
More Forum Discussions

What are the symptoms of a dirty air filter?

The symptoms of a dirty air filter are: 1. Insufficient air intake, leading to lack of power; 2. Inadequate oxygen supply, causing incomplete combustion, resulting in black smoke emission, excessive carbon deposits in the cylinders, and darkened engine oil. The replacement method for an air filter is: 1. Remove the damping rods on both sides of the glove box; 2. Take off the glove box to reveal a black rectangular cover, pry it open and remove the clips; 3. Take out the old air filter; 4. Install the new filter element. The functions of an air filter are: 1. Ensuring the air conditioning filter fits tightly against the housing to prevent unfiltered air from entering the cabin; 2. Separating dust, pollen, and solid particles from the air; 3. Absorbing moisture, soot, ozone, odors, carbon oxides, SO2, and CO2 from the air, with strong and lasting moisture absorption capabilities; 4. Preventing car windows from fogging up, ensuring clear visibility for the driver and safe driving; 5. Maintaining clean air in the passenger compartment to prevent bacterial growth.
7
0
Share

Should Waterlogged Headlights Be Replaced or Repaired?

When headlights become waterlogged, it is best to replace them entirely and ensure proper sealing. Related information: 1. Introduction: Automobile lights are various traffic lights installed on vehicles to ensure safe driving. They are divided into two categories: lighting lamps and signal lamps. Lighting lamps should provide good illumination while minimizing glare. 2. Expansion: For headlights, to balance these two requirements, high beam and low beam operating modes are adopted. High beam is used for long-distance illumination when there are no oncoming vehicles or when not following other cars, produced by the more powerful main filament located at the reflector's focal point, with an approximately horizontal beam direction.
4
0
Share

What Are the Impacts of a Flooded Car?

Impacts of a flooded car: 1. It can damage the electronic control systems inside the car, such as the engine ECU, ABS system, SRS system, GPS navigation, etc., causing poor contact in circuits or even short circuits and burnout; 2. After the car is flooded, never attempt to start or turn the engine, as this can cause severe deformation of the engine connecting rod. Therefore, the car should be towed to a repair shop as soon as possible for disassembly and cleaning; 3. The hazards of a water-damaged car are significant. If a vehicle is submerged in water, it can easily lead to rusting of body components, shortened lifespan, and reduced safety performance. Overnight heavy rain or parking in low-lying areas can cause a car to be flooded. There are three different levels of water damage: 1. If the water level exceeds the car's chassis, it is considered a water-damaged car; 2. If the water level exceeds the oil dipstick, it is a semi-flooded car; 3. If the water level has exceeded the engine hood or the dashboard panel, it is a fully flooded car.
19
0
Share

Where is the car hood located?

The hood is positioned at the front of the car, above the engine compartment. For cars with mid-engine or rear-engine configurations, the hood is located at the rear of the vehicle. Additionally, some cars with front-mid-engine setups also have their hoods at the front. The functions of the hood include: 1. Airflow guidance; 2. Protection for the engine and surrounding pipeline components; 3. Assisting driver visibility by adjusting the direction of reflected light; 4. Preventing accidents; 5. Isolating heat generated during engine operation. The hood is made of rubber foam and aluminum foil materials, which help reduce engine noise while simultaneously isolating the heat produced during engine operation, effectively protecting the paint surface on the hood and preventing aging.
16
5
Share

What battery does the Emgrand GL use?

The Emgrand GL uses a battery model 55D23L, with specifications of 12V and a capacity of 60AH. The battery's lifespan is generally 3 to 4 years, and it is recommended to replace it every 2 to 3 years. To maintain the battery, avoid leaving the vehicle parked for extended periods: The car's battery will self-discharge when left idle for long periods, so it is best to drive the car at least once a week for a minimum of 20 minutes to allow the battery to recharge while driving. To use the battery effectively, remember to close the windows before turning off the engine: The power windows and sunroof are powered by the battery, so it is advisable to close all windows before turning off the engine, rather than after, or using the long-press lock button to close windows after leaving the car. To maintain the battery, keep it clean and tidy: Regular inspections are an effective way to extend the battery's lifespan. Use a professional battery terminal brush or an old toothbrush to clean dust and corrosion from the positive and negative terminals. Apply petroleum jelly or a greasy substance to the contact surfaces to form a protective layer.
2
1
Share

Where is the key recognition area of the Audi A8?

The key recognition area of the Audi A8 is located on the four door handles. To unlock, you first need to place your hand on the car's handle, ensuring your hand touches the inner side of the handle. Once the lock is released, you can open the door. Introduction to Audi's Keyless Entry System: The car keyless entry system, abbreviated as PKE (PASSIVE-KEYLESS-ENTER), utilizes the world's most advanced RFID radio frequency technology and the most sophisticated vehicle identity coding recognition system. The ignition key contains a chip, each with a fixed ID. The car can only start when the ID of the key chip matches the engine's ID. If they do not match, the engine will not start. Functions of the Keyless Entry System: When the key approaches the car body, the doors automatically unlock, and the anti-theft alarm is deactivated, with the turn signals flashing twice. When the key moves away from the car body, the doors automatically lock, and the anti-theft alarm is activated, with the turn signals flashing once and the horn emitting a short beep.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.