How to Change the Dashboard Language from English to Chinese in a 2012 Volkswagen CC?

What is the operation process of an automatic transmission car?

Operation process of an automatic transmission car: Before starting the car, ensure the gear is in P (Park) or N (Neutral). When starting, coordinate the brake, handbrake, and accelerator properly. After shifting to D (Drive), release the handbrake while slowly lifting the brake pedal, then gently press the accelerator to allow the vehicle to start moving gradually. Avoid stomping on the accelerator abruptly, and make sure not to release the brake pedal when shifting gears. Correct operation methods for automatic transmission: 1. The vehicle can only be started in P or N gear. To shift out of P gear, the brake must be pressed. N gear is used when the vehicle is to move forward immediately after starting – press the brake, shift to N gear, then start the engine, and shift to D gear to proceed. 2. Never shift to N gear while driving to coast. The automatic transmission requires lubrication, and shifting to N gear while driving prevents the oil pump from supplying oil properly, causing the internal components of the transmission to overheat and leading to complete damage.

12

3

Share

Should an automatic transmission car be put in P or N gear at traffic lights?

An automatic transmission car should be put in N gear at traffic lights. It is not recommended to put it in P gear while waiting at a red light because when the vehicle is parked in P gear, the transmission locks the gears. If the car is rear-ended at this time, it can directly crack the transmission, leading to its complete failure. For short waits at traffic lights, you can keep the car in D gear and apply the brake or handbrake. For longer waits, it is advisable to shift to N gear and then apply the handbrake to alleviate driving fatigue. The P gear in an automatic transmission is designed to assist in parking, using the engagement of internal ratchet and pawl mechanisms to lock the gears, similar to manual transmission parking but with dedicated gears. The ratchet and pawl are not 100% tightly fitted; there is a certain gap left in the design to prevent transmission damage from collisions when the P gear is engaged.

2

4

Share

What are the reasons for the Nissan Tiida's one-button start failing to ignite?

Reasons for the Nissan Tiida's one-button start failing to ignite: 1. Insufficient or depleted battery in the remote key; 2. Prolonged use of the battery leading to aging; 3. Damage to the starter itself; 4. Failure of the fuel pump resulting in no fuel supply; 5. The gear being in D (Drive) position prevents ignition; 6. Damage to the engine speed sensor causing no high-voltage spark, making the car unable to start normally. The Nissan Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company, with dimensions of 4250 mm in length, 1695 mm in width, and 1535 mm in height, and a wheelbase of 2700 mm. The Tiida is equipped with a comprehensive safety system, including standard active safety features such as ABS anti-lock braking system with EBD electronic brake-force distribution, BA brake assist system, rear windshield with wiper, and high-mounted brake light.

2

5

Share

Why does an automatic car make a clunking sound when shifting into reverse?

An automatic car makes a clunking sound when shifting into reverse because the brake pedal is not pressed to the appropriate position or the car has not come to a complete stop before shifting into reverse. Before shifting into reverse, it is essential to ensure the car has fully stopped to avoid damaging the automatic transmission. There are three common types of automatic transmissions in cars: 1. AT transmission, also known as a torque converter transmission, connects to the engine via a torque converter and uses planetary gears for shifting and torque conversion; 2. Dual-clutch transmission (DCT), developed based on manual transmissions, has a structure similar to manual transmissions but includes an additional clutch and shift control mechanism; 3. CVT transmission, a relatively simple automatic transmission, consists of two cone pulleys and a steel belt that moves along the pulleys to enable shifting and torque conversion.

11

1

Share

Should You Shift to P or N Gear at a Red Light with an Automatic Transmission?

When waiting at a red light with an automatic transmission, it is recommended to shift to N gear, and you can also engage the handbrake if the wait is longer. There is no issue with shifting to N gear for short durations at a red light, but leaving it in N gear for extended periods can damage the car, especially the transmission. The reasons for not recommending shifting to P gear at a red light are: 1. Shifting to P gear without engaging the handbrake can cause damage to certain components; 2. The process of starting from P gear is cumbersome; 3. Frequently shifting to P gear can cause gear grinding in the automatic transmission, damaging the transmission bearings. The correct practice at a red light is: press the brake, shift to N gear, and when the light turns green, shift to D gear to start driving.

15

3

Share

What is the wading depth of the Grand Cherokee?

The wading depth of the Grand Cherokee is 700mm. The wading depth of the Grand Cherokee is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Sagitar is below the water level when wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct procedures should be followed: Before the vehicle enters the water, be sure to turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not proceed recklessly. Instead, choose an alternative route.

13

5

Share

How to Change the Dashboard Language from English to Chinese in a 2012 Volkswagen CC?

What is the operation process of an automatic transmission car?

Should an automatic transmission car be put in P or N gear at traffic lights?

What are the reasons for the Nissan Tiida's one-button start failing to ignite?

Why does an automatic car make a clunking sound when shifting into reverse?

Should You Shift to P or N Gear at a Red Light with an Automatic Transmission?

What is the wading depth of the Grand Cherokee?

What are the automatic transmission pickup trucks available?

How to Use the D and S Gears in an Automatic Transmission?

Should You Press the Brake When Shifting Gears in an Automatic Transmission?

What Causes the Clicking Sound When Shifting Gears in an Automatic Transmission?