How to Change the Dashboard Display Language from English Back to Chinese in the Buick Verano?

1 Answers
DeDallas
07/29/25 11:35pm
You can press the radio config to enter the vehicle settings and change the language. The Buick Verano's dashboard function selection can be accessed by using the right-hand steering wheel controls to open, scroll, and browse through different menu items and display contents. Switch between main menus. Use y or z to scroll through menu items. Select the main menu with the steering wheel buttons. Menu symbols are displayed in the top row of the display.
Was this review help?
12
4
Share
More Forum Discussions

How to Reset the Octavia Maintenance Reminder?

The method to reset the Octavia maintenance reminder mainly includes: 1. First, press and hold the small black button on the trip computer. 2. With the other hand, turn on the power without starting the engine. 3. After a few seconds, release the small black button, and then turn it to the right. Extended content: 1. Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
11
5
Share

How many kilometers can a underbone motorcycle run on one liter of gasoline?

An underbone motorcycle can run approximately 77-91 kilometers on one liter of 97 gasoline. Motorcycle styles: Motorcycles are divided into five categories: street bikes, scooters, underbone bikes, cruiser bikes, and off-road bikes. From the perspective of motorcycle displacement, the larger the displacement, the higher the fuel consumption. Two major categories of motorcycle products: Motorcycle products are divided into two major categories: mopeds and motorcycles. According to the original standard, any vehicle with an engine displacement not exceeding 50ml and a maximum design speed not exceeding 50km/h is classified as a moped. Vehicles with an engine displacement of 50ml or more, or a maximum design speed exceeding 50km/h, are classified as motorcycles. Mopeds are further divided into two-wheeled mopeds and three-wheeled mopeds.
7
0
Share

What are the reasons for the Mazda 6's lack of acceleration without any fault codes?

The reason for the Mazda 6's lack of acceleration is due to excessive carbon buildup in the throttle body, among other factors. Below are the specific reasons for the Mazda 6's lack of acceleration: Carbon buildup inside the engine: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts, making it difficult to start. Ignition system: Issues with the ignition system; check the working condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or improper spark plug firing can also lead to such symptoms. Check if the spark plugs have excessive carbon buildup and replace them if necessary. Unstable fuel pressure: Abnormal fuel pump supply pressure or incorrect readings and poor performance of the intake pressure sensor can cause vehicle shaking. Check the fuel pressure and replace components if necessary.
12
5
Share

Where is the handbrake of the road roller located?

The handbrake of the road roller is located above the rear wheels. Functions of road rollers: In highway, railway, airport, hydraulic engineering, and construction projects, road rollers are mainly used for compacting roadbeds, pavements, embankments, cofferdams, and building foundations. Significance of compaction: Through methods such as rolling and impact, external forces overcome the friction between particles of soil, gravel, and asphalt mixtures, bringing them closer together and squeezing out water and air. This causes larger particles to rearrange, reducing the gaps between them, while smaller particles fill the gaps between larger ones, expelling water and air from the voids. Under external forces, particles may break, leading to further filling. This increases the friction and cohesion between material particles, resulting in denser compacted materials.
4
5
Share

How Many Horsepower is a Four-Stroke Engine?

Four-stroke engines produce 5.36 horsepower. Characteristics of Stroke: Four-stroke engines utilize valves, which are operated via a timing chain (small chain) driven by the crankshaft timing gear. This timing chain then drives the camshaft to control the opening/closing of the valves. Compared to two-stroke engines of the same displacement, four-stroke engines offer better fuel efficiency, although two-stroke engines generally deliver higher power output. Working Principle of Stroke: To generate power, an engine must first intake a mixture of fuel and air into the cylinder. This mixture is then compressed and ignited to produce thermal energy. The expanding gases act as the working medium, pushing the piston and connecting rod to rotate the crankshaft, thereby converting thermal energy into mechanical energy. Finally, the exhaust gases are expelled from the cylinder. This completes one working cycle of the engine.
20
5
Share

Does a manual transmission fluid need to be completely filled?

Manual transmission fluid needs to be completely filled. Symptoms of insufficient manual transmission fluid include driving vibrations, difficulty starting, gear shifting problems, and abnormal transmission noises. Hazards of not replacing transmission fluid: 1. Damage to the transmission's shift control mechanism; 2. Abnormal wear of gears and clutch plates inside the transmission; 3. Affects the normal operation of the transmission, leading to damage to the transmission valve body. Transmission fluid and engine oil are not the same. Although both fluids serve a lubricating purpose, their functions differ and should not be confused. Differences: Engine oil is the lubricant for the engine system, possessing properties such as oxidation resistance, anti-wear, and corrosion prevention. Transmission fluid, on the other hand, is primarily used to keep the gear system clean and extend the service life of internal transmission components. Because the structure and operating environment of the transmission and engine are different, transmission fluid cannot be used as engine oil, and engine oil cannot be used as transmission fluid.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.