How to Change the Color of BMW Dashboard?

What Causes Low Tire Pressure in New Cars?

Low tire pressure in new cars may be due to leaks in the tire or valve stem, which require inspection at a tire shop; deformation of the wheel rim, leading to reduced sealing performance of the tire; thermal expansion and contraction, as manufacturing differences in tires may result in insufficient tire pressure due to temperature changes. Additional information is as follows: 1. Tire Pressure: Tire pressure, strictly speaking, refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car—its failure can lead to the end of the car's life—while tire pressure is akin to the car's blood pressure. The level of tire pressure plays a crucial role in the car's performance and power. 2. Hazards of Low Tire Pressure: Increased friction with the road surface, leading to higher fuel consumption; causes the steering wheel to become heavy and may lead to veering, both of which are detrimental to driving safety; increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction between the tire and the rim, resulting in damage to the bead area and abnormal wear.

6

5

Share

What are the full names of the gear positions P, R, D, and S?

P stands for Parking gear, R for Reverse gear, D for Drive gear, and S for Sport mode. The specific introductions are as follows: 1. P (Parking) gear: This is a very commonly used gear. When you have parked your car, you must remember to shift into this gear. The parking brake will lock the output shaft, preventing the vehicle from rolling. 2. R (Reverse) gear: This gear can only be engaged when the vehicle is stationary and the engine is idling. 3. D (Drive) gear: In this gear, the car's transmission can automatically shift between various gears. The D gear is the most commonly used driving position. The numbers 1, 2, and 3 following D represent Drive gears 1, 2, and 3, respectively. In this gear, the transmission automatically switches between gears 1 to 3 and does not shift up to gears 4 and 5. It can be used as a limiting gear when traffic is not very smooth, avoiding the skip between gears 3 and 4. 4. S (Sport) mode: In this mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer time to promptly deliver high torque, increasing the vehicle's power for instant acceleration.

18

2

Share

What are the requirements for driving in a straight line?

Requirements for driving in a straight line include the following: The driver must start smoothly and maintain basic operational sequence; Correctly handle the steering wheel, primarily using the left hand, and utilize the steering wheel's free play to adjust the driving direction; Master the timing and methods of gear shifting, and be adept at switching between high and low gears at various speeds; Apply the brake promptly and effectively (anticipatory braking for deceleration); Be capable of performing fixed-point parking and making U-turns at intersections. Additional related information: Pay attention to speed: Maintain a steady speed for straight-line driving. Generally, drive at a moderate speed without exceeding the warning limit to ensure both safety and fuel efficiency. Driving requirements: Keep eyes on the road ahead and be aware of the surroundings. Select a reference point to maintain straight-line driving, adjust direction in time, and always be alert to various traffic situations ahead for timely detection and response.

12

3

Share

What are the new regulations for motorcycle registration in 2018?

2018 new regulations for motorcycle registration: Newly purchased motorcycles can be registered immediately, with a maximum grace period of three months for license plate application. The validity period of temporary license plates generally does not exceed thirty days. There are four types: temporary license plates for administrative jurisdictions, temporary license plates for cross-administrative jurisdictions, temporary license plates for testing purposes, and temporary license plates for special-type motor vehicles. The following are the new motorcycle regulations for 2018: 1. Article 8: Cargo motor vehicles are not allowed to carry passengers except in the driver's cabin and fixed seats approved in the compartment. Two-wheeled motorcycles are not allowed to carry passengers when driving on highways. 2. Article 11: When motor vehicles are driving normally on highways, the minimum speed shall not be less than fifty kilometers per hour. The maximum speed for small passenger vehicles shall not exceed one hundred and ten kilometers per hour; for large passenger vehicles, cargo vehicles, and motorcycles, the maximum speed shall not exceed ninety kilometers per hour. 3. Article 14: When motor vehicles are driving on highways, they shall drive in the traffic lanes. Motorcycles shall drive in the rightmost lane.

10

3

Share

Why are Chinese cars left-hand drive?

Because China adopts right-hand traffic, where vehicles drive on the right side of the road. Following the principle of positioning the driver's seat closer to the road centerline better ensures traffic safety, which is why all vehicles in China are left-hand drive. The distinction between left-hand drive and right-hand drive vehicles depends on whether the local traffic follows left-hand or right-hand driving rules. Additional information: 1. Origin of left-hand and right-hand drive: The earliest automobiles had centrally located driver's seats. Soon after, some automakers positioned the driver's seat on the side closer to the road centerline for better visibility of oncoming traffic, while others placed it on the roadside side to avoid collisions with obstacles like walls, hedges, or ditches. Practical experience proved that the former approach better maintained road safety, thus becoming the standard for automakers. This led to the distinction between left-hand drive (driver's seat on the left front) and right-hand drive (driver's seat on the right front) vehicles. 2. Road traffic direction: The direction of road traffic is a crucial aspect of traffic regulations worldwide, specifying the side of the road vehicles should drive on to prevent confusion and accidents. Road traffic directions can be categorized into left-hand traffic (vehicles drive on the left) and right-hand traffic (vehicles drive on the right).

1

0

Share

What is the ground clearance of the BMW 1 Series?

The ground clearance of the BMW 1 Series is 140, and the minimum ground clearance is 118. Here are the relevant details: 1. The body dimensions are length*width*height of 4360mm*1748mm*1423mm, with a wheelbase of 2660mm, a curb weight of 1320kg, a payload capacity of 1760kg, a unibody construction, a fuel tank capacity of 53L, a trunk capacity of 370L, a drag coefficient of 0.33, and a minimum turning diameter of 10.7m. 2. The design of the BMW 1 Series convertible was overseen by former BMW chief designer Chris Bangle. Although he has since left the automotive design field, the classic styling of the 1 Series remains timeless. Classic design elements are often overshadowed by fashion trends. With the arrival of Adrian van Hooydonk to the BMW design team, a new era of BMW style began, from the new 7 Series to the new 5 Series, showcasing van Hooydonk's unique perspective on contemporary trends. As for the BMW 1 Series, it seems more like a product of the 20th century, but it does feature a stylish soft-top convertible.

11

4

Share

How to Change the Color of BMW Dashboard?

What Causes Low Tire Pressure in New Cars?

What are the full names of the gear positions P, R, D, and S?

What are the requirements for driving in a straight line?

What are the new regulations for motorcycle registration in 2018?

Why are Chinese cars left-hand drive?

What is the ground clearance of the BMW 1 Series?

Can I drive with only a photocopy of the vehicle license?

Can I Replace Only the Control Arm Bushing Without Changing the Entire Assembly?

What is the difference between straight-line overtaking and lane-changing overtaking?

Is it better to steer early or late when reversing into a parking space?