How to Change from C1 to C2 on Traffic Management 12123?

1 Answers
StEmmett
07/30/25 5:05am
You can only go to the vehicle management office. Changing from C1 to C2 is considered a downgrade of the driver's license, and you need to fill out a downgrade confirmation form at the vehicle management office. In some places, driving schools will handle everything for you, so you don't need to go to the vehicle management office yourself, but you will have to pay extra fees to the driving school. Below is an introduction to the differences between C1 and C2: 1. Permitted vehicle types: C2 permits small and micro automatic transmission passenger vehicles, as well as light and micro automatic transmission cargo vehicles; C1, in addition to the vehicles permitted by C2, can also drive micro, small, and light special-purpose vehicles. Simply put, C2 only allows driving automatic transmission vehicles, while C1 allows both automatic and manual transmission vehicles, with more permitted vehicle types. 2. Driving school prices: Many people think that the C1 license is harder to obtain, so the price would be more expensive than C2. The opposite is true because automatic transmission vehicles are more expensive than manual transmission ones, and the maintenance costs are higher, so generally, the registration fee for learning to drive with a C2 license is higher than that for C1.
Was this review help?
11
4
Share
More Forum Discussions

Where is the low-pressure pipe joint of the Volvo S80 air conditioner?

The low-pressure joint of the Volvo XC60 air conditioner is located under the black plastic panel on the right side of the engine cover. Remove the black plastic panel under the wiper to see it. Below is relevant information about the low-pressure and high-pressure pipes of the car air conditioner: 1. Air conditioner low-pressure and high-pressure pipes: During the cooling process, the small pipe is the high-pressure pipe, and the large pipe is the low-pressure pipe; during the heating process, the small pipe is the low-pressure pipe, and the large pipe is the high-pressure pipe. Cooling: small pipe high pressure, large pipe low pressure; heating is the opposite. 2. Working principle: The cooling purpose is achieved by continuously converting the refrigerant between liquid and gaseous states; under normal temperature and pressure, the refrigerant exists in a gaseous state. To convert the gaseous refrigerant into a liquid refrigerant, the compressor pressurizes the gaseous refrigerant to turn it into a liquid refrigerant. The liquid refrigerant flows to the indoor unit through the high-pressure pipe.
5
0
Share

What is the difference between ECVT and CVT?

ECVT and CVT mainly have the following differences: 1. Structural differences: The structure of CVT mainly consists of two sets of pulleys (drive pulley, driven pulley) and a transmission belt (steel belt), oil pump, torque converter, actuator (valve body, oil circuit), sensors, control computer, etc.; ECVT has a simple structure and does not have complex mechanisms such as clutches, torque converters, or gear shaft sets in traditional transmission systems. It is composed of a set of planetary gears and two motors. 2. Different working principles: In CVT technology, motors 1 and 2 need to work together, and the engine cannot directly drive the wheels in most cases; ECVT not only transmits power but also couples the energy of the engine and the motor to achieve power output, so it is actually a power combination system, specifically designed as a power distribution mechanism for hybrid models. 3. Different power solutions: ECVT is the electric transmission mechanism of Toyota's strong hybrid solution, composed of two motors and a set of planetary gears, which can achieve electric drive, continuously variable transmission, and energy recovery; CVT refers to ordinary mechanical continuously variable transmission.
9
0
Share

How to activate the windshield washer on a Mercedes-Benz E-Class?

The windshield washer switch on the Mercedes-Benz E-Class is located on the wiper control stalk on the right side of the steering wheel. To activate the washer, pull the wiper control lever toward the driver. Below is an introduction to the Mercedes-Benz E-Class: 1. Mercedes-Benz E-Class Exterior: The Mercedes-Benz E-Class is a mid-to-large-sized high-end business sedan, coupe, and station wagon developed by Mercedes-Benz, positioned between the C-Class and S-Class. The 1947 Mercedes-Benz 170 is widely recognized as the ancestor of the E-Class, being one of the first models developed by Mercedes-Benz after the war. Compared to the 170s of the same era, the 170 had a simpler design and further simplified equipment. 2. Mercedes-Benz E-Class Body Styles: The E-Class is available in sedan and station wagon body styles, with gasoline engine options of 2.0L and 3.0L, and diesel engines are also available as options.
16
3
Share

Is it necessary to go to a 4S shop for new car paint touch-up?

New car paint touch-up is not necessarily required to be done at a 4S shop. The method for paint touch-up is as follows: 1. Use clean water to wash the area where the paint has peeled off; 2. Use sandpaper to smooth the area where the paint has peeled off, and check by hand whether the area is smooth; 3. Cover the areas that do not need touch-up with tape; 4. Choose a spray paint can that matches the car color and spray the area where the paint has peeled off. Methods to prevent car paint from peeling off: 1. Avoid using a duster or dry cloth to wipe the paint surface directly. Rinse off dust and dirt from the car surface with water, then wipe with a clean absorbent cloth; 2. Avoid parking under direct sunlight for long periods; 3. Reduce the frequency of car washing and avoid waxing and polishing; 4. Pay attention to promptly remove corrosive substances to reduce paint surface corrosion.
5
4
Share

Why does the Camry shake severely when the air conditioner is turned on?

The reasons for severe shaking when the Camry's air conditioner is turned on are as follows: 1. Severe engine carbon buildup: The most common cause of shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. The solution is to clean the fuel system and check if the idle control valve has carbon buildup, which should be cleaned thoroughly. 2. Unstable fuel pressure: Check whether the fuel supply pressure and the intake pressure sensor are functioning properly. If the fuel pump's supply pressure is abnormal or the intake pressure sensor's values are incorrect or malfunctioning, it can cause the car to shake. The solution is to check the fuel pressure and replace components if necessary. 3. Aging engine components: Car shaking can also be related to worn engine mounts. Engine mounts are essentially the engine's vibration damping system, responsible for absorbing minor vibrations when the engine is running.
8
1
Share

Is the Water Leaking from the Chassis Air Conditioning Water?

Water dripping from the bottom of a car is generally the condensate water from the air conditioning system, and it is normal for it to drip below the co-driver's seat. Here are some related extended information: 1. Automotive air conditioning system: It is a device that cools, heats, ventilates, and purifies the air inside the car compartment. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety. Water dripping from the chassis is the condensate water from the air conditioning system, which is a normal phenomenon. 2. Causes: The reason for the air conditioning water is that the low temperature of the evaporator box in the air conditioning system causes the hot air inside the car to condense into water droplets, which then flow out through the drain pipe. Water leakage from the radiator usually occurs below the radiator, i.e., the area between the car's front bumper and the engine, and the car's dashboard will usually give an alarm. If the water is colored, it indicates a leak in the cooling system, and it is advisable to get it checked and repaired.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.