How to Cancel the Speed Limit on Cruze?

1 Answers
SophiaMarie
07/30/25 3:40am
There is a button on the left side of the Cruze steering wheel. Adjust it to the speed limit setting, then turn it up or down to the cancel position to deactivate the speed limit. Here are some related details: 1. Currently, the Chevrolet Cruze has been discontinued, with the latest model being the 2018 version. Therefore, the Cruze available on the market is either a used car or leftover stock. 2. The 2018 Chevrolet Cruze adopts the latest family design language, featuring a slim double-layer grille. The upper grille is embedded with the Chevrolet logo in the middle and connects to the upward-slanting headlight clusters via decorative chrome strips. Both the upper and lower grilles extensively use horizontal chrome decorative strips. 3. The overall front face design is relatively flat. The side profile features a continuous waistline that rises in a diving posture, giving a strong sense of sportiness. 4. The 2018 Cruze still offers a 1.5L naturally aspirated engine and a 1.4T turbocharged engine. The 1.5L engine delivers a maximum power of 114 horsepower and a maximum torque of 146N·m, while the 1.4T engine provides a maximum power of 150 horsepower and a maximum torque of 240N·m. The transmission system is paired with a 6-speed manual, 6-speed automatic, or 7-speed dual-clutch transmission.
Was this review help?
15
1
Share
More Forum Discussions

What is the fuel consumption of the Kia Pegas?

The comprehensive fuel consumption of the Kia Pegas is 5.7L/100km. There are currently 2 models of the Kia Pegas on sale: the Elite Connect Edition and the Comfort Sunroof Edition, both with a comprehensive fuel consumption of 5.7L/100km. The above figures are based on the NEDC comprehensive fuel consumption, which is the data measured under the NEDC test procedure for combined driving conditions. The actual fuel consumption is higher than this value, ranging between 5.7-6.0L/100km. The fuel consumption of a car is directly influenced by five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer may control higher RPMs to warm up the engine, which also increases fuel consumption.
11
0
Share

What is the knob inside the Superb's armrest box?

The knob inside the Superb's armrest box is for adjusting the air conditioning airflow. The main function of the armrest box is to effectively alleviate the fatigue in the driver's arm during long driving sessions, preventing numbness, stiffness, and soreness in the arm. The Superb is a mid-size sedan launched by Skoda Auto, with dimensions of 4869mm in length, 1865mm in width, and 1489mm in height, and a wheelbase of 2841mm. The front face of the Superb features a vertical waterfall-style grille, with full LED headlights on both sides. The grille is connected to the car's headlights, further highlighting the refined feel of the vehicle.
3
3
Share

How to Drive a Manual Transmission Car on the Road?

Press the clutch, engage first gear, and gently press the accelerator while releasing the clutch to start. After the car moves, shift to second gear. Shift to third gear between 20-30 km/h, fourth gear around 40 km/h, and fifth gear above 50 km/h. Maintain speed thereafter. When decelerating, simply press the clutch and engage the corresponding gear. The key to manual transmission is the coordination between the clutch and accelerator. Below are the specific methods for operating each gear: 1. First gear: Push left and then forward to engage, and push back along the same path to return to neutral. 2. Second gear: Hold the gear lever and pull it down to the lower left side, then push back along the same path to return to neutral. 3. Third gear: Push straight up from the neutral position to engage, and push back along the same path to return to neutral. 4. Fourth gear: Push straight down from the neutral position to engage, and push back along the same path to return to neutral. 5. Fifth gear: Push straight to the right and then up to engage, and push back along the same path to return to neutral. 6. Reverse gear: Press down, push left and forward to engage reverse, and push back along the same path to return to neutral.
20
0
Share

How to adjust the headlights of Wuling Hongguang S?

Wuling Hongguang S headlight adjustment method: There are four knobs at the back of the headlights, which control the height and left-right adjustment of the low beam, as well as the height and left-right adjustment of the high beam. By adjusting these four knobs, you can modify the projection angle of both high and low beams. The Wuling Hongguang S is a microvan produced by SAIC-GM-Wuling, with body dimensions of 4390mm in length, 1660mm in width, and 1750mm in height, featuring a wheelbase of 2720mm. In terms of power, the Wuling Hongguang S is equipped with a 1
7
3
Share

What does the exclamation mark in a triangle mean in the Volkswagen Lamando?

An exclamation mark inside a triangle indicates a malfunction in the vehicle's general performance, components, or functions. Common causes include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Apart from the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission malfunction or low transmission fluid. The transmission fluid should be replaced promptly. Brake System Fault: A red circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating brake system failure or low brake fluid. Immediate inspection of the brake system is required to prevent accidents. Tire Pressure Anomaly: A yellow bracket with a horizontal line and an exclamation mark in the middle indicates a tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is a lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
19
0
Share

Is it normal for the accelerator pedal to have slight vibration?

It is normal for the accelerator pedal to have slight vibration. In some automatic transmission cars, when the gear is in D and the brake is pressed, both the accelerator pedal and the brake pedal may experience some vibration. If the vibration becomes more noticeable or severe, it may be caused by damage to the engine mount, which needs to be replaced as soon as possible. The car's engine is not directly connected to the frame; there are rubber engine mounts at the connection points between the engine and the frame. The purpose of these mounts is to absorb vibrations, preventing the engine's vibrations from being directly transmitted to the car body. Rubber products can age over time, and when the rubber engine mounts age, they may harden, causing the engine's vibrations to be directly transmitted to the car body.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.