How to Cancel the Maintenance Reminder on the Ford Escort?

2 Answers
LeJackson
09/04/25 6:45am
The method to cancel the maintenance reminder on the Ford Escort is: press and hold the navigation information button until the password input interface appears, then enter the correct password and confirm to reset. Taking the 2019 Ford Escort as an example, its body structure is a 4-door, 5-seater sedan with dimensions of 4587mm in length, 1825mm in width, and 1490mm in height, with a wheelbase of 2687mm. The 2019 Ford Escort features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque of 152Nm, paired with a 6-speed manual transmission.
Was this review help?
17
4
Share
RobertRose
09/16/25 7:38am
I've been driving a Ford Escort for many years, and whenever the maintenance reminder light comes on, I find a way to turn it off. The cancellation steps are quite simple: First, turn the car key to the ON position without starting the engine, just to the point where the dashboard lights up. Then, locate the TRIP button near the steering wheel on the dashboard and hold it down firmly. Wait for 5 to 10 seconds, and usually, the screen will flash or display a 'Reset Hold' prompt. At this point, you can release the button. If it doesn't work the first time, just repeat the process, and it should succeed. However, I must remind you that this reminder is not a joke—it's alerting you that it's time for an oil change or a vehicle inspection. Don't rush to cancel it and forget about maintenance. Otherwise, like what happened with my car, forgetting to change the oil led to engine trouble, costing me thousands in repairs. Regular maintenance keeps the car running smoothly and extends its lifespan. It's best to turn off the reminder only after completing the scheduled maintenance.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

How Severe Is the Damage When Scraping the Car Undercarriage?

Scraping the car undercarriage can result in varying degrees of damage. When driving on different road surfaces, speed bumps and potholes are potential "killers" for the car undercarriage. The most vulnerable parts of the undercarriage are the fuel tank, engine oil pan, and brake system fluid lines. If you notice oil leakage or unusual noises after scraping the undercarriage, it may indicate significant damage. Ways to prevent undercarriage scrapes: 1. Pay attention to driving habits: Slow down when driving on uneven roads and be extra cautious of curbs, speed bumps, and potholes. 2. Apply undercarriage coating: You can spray an undercarriage protective coating. This coating effectively shields the undercarriage from flying stones, gravel, and minor scrapes.
2
2
Share

What Happens If You Don't Shift Gears While Driving?

Both torque and power will decrease after the engine speed reaches a certain point. Therefore, if you don't shift gears while driving, as the throttle opening increases, the engine speed will rise, but the traction force will gradually decrease. Eventually, when the engine speed reaches its maximum, the vehicle speed will stabilize at a certain level and no longer increase. Under these conditions, the fuel consumption of the car at the same speed will be significantly higher than that of a normally driven vehicle. Gear shifting technical requirements: 1. Timely: Master the appropriate gear shifting timing—neither upshifting too early nor downshifting too late. 2. Correct: The coordination between the clutch pedal, accelerator pedal, and gear lever must be accurate and synchronized, with precise positioning. 3. Smooth: After shifting into a new gear, release the clutch pedal promptly and smoothly. 4. Swift: The action should be quick to minimize gear shifting time, reduce kinetic energy loss, and lower fuel consumption.
8
2
Share

Is It Safe to Drive Through Water Without Stalling?

Driving through water without stalling doesn't mean it's completely safe; it only indicates that the engine might be fine. Cars are not amphibious vehicles. While many components have waterproof designs, there's still a possibility of water ingress or moisture damage. After driving through water, it's best to get out and inspect the engine compartment, engine air intake, wheels, brake discs, exhaust pipe, carbon canister, and other areas for any foreign objects to ensure safety for the next drive. Potential hazards of driving through water: 1. Engine damage: Water entering the engine can cause issues like insufficient power and shaking. Prolonged use may lead to piston rod deformation or even breakage, ultimately damaging the engine. 2. Stalling: A wet or short-circuited high-voltage distribution system can cause stalling. Water entering the exhaust pipe can also lead to stalling.
12
5
Share

Is It Normal to Have Minor Scratches While Driving?

Having minor scratches while driving is a very common phenomenon. Especially for novice drivers, as the saying goes, "All things are difficult before they are easy," no one can drive skillfully on their first try. It requires step-by-step accumulation of experience. Therefore, it's essential to face this issue correctly, with the key being to learn how to adjust one's mindset and absorb lessons, thereby gaining more driving experience. Guide for New Drivers: 1. Maintain a Good Mindset: When new drivers first hit the road, they often feel nervous, which can lead to stiff movements and mistakes in moments of panic. Thus, it's crucial for beginners to adjust their mindset before driving. 2. Maintain a Safe Following Distance: While driving, always observe the distance between your car and the vehicles in front and behind, especially on highways. It's important to understand that both new and experienced drivers need time to react. Therefore, maintaining a safe distance is necessary to avoid minor scratches.
12
3
Share

Why does the accelerator feel heavy and resistant when driving?

Driving with a heavy and resistant accelerator pedal may be due to issues with the engine's oil and electrical circuits, a dirty fuel injector, or excessive debris at the bottom of the fuel tank. It is recommended to visit a 4S shop for cleaning. There are two types of accelerator pedals: 1. Floor-mounted pedal: With the pivot point located at the bottom of the pedal, the entire foot can rest on it. The pedal itself serves as a fulcrum, allowing the calf and ankle to control the pedal more effortlessly, thereby improving precision and reducing fatigue. When paired with a manual transmission, the floor-mounted pedal also makes it easier to perform heel-and-toe techniques. 2. Hanging-type accelerator pedal: With the pivot point at the top of the bracket, the lower structure is relatively simpler. This design allows for a lighter touch and can be made with a metal rod for the pedal bracket, significantly reducing costs. As a result, most manufacturers prefer this type of pedal.
2
1
Share

Is it allowed to drive with Bluetooth earphones?

Driving with Bluetooth earphones is permitted, but wearing earphones can easily impair the driver's judgment of the surrounding environment, increasing the risk of accidents. For personal safety considerations, it is advisable to avoid wearing any earphones while driving. Driving precautions: 1. Stay in the middle lane: Develop the habit of driving in the middle lane when outside the city. In the absence of a median barrier, staying in the middle lane provides reaction time in case of unexpected incidents from oncoming traffic, helping to avoid head-on collisions. 2. Avoid distractions while driving: Always maintain full concentration when driving. Refrain from smoking, applying facial masks, or listening to loud music while driving, as any distraction can pose significant safety hazards.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.