How to Cancel the Maintenance Reminder on a Ford Vehicle?

1 Answers
LeEmma
07/29/25 5:06pm
Steps to cancel the maintenance reminder on a Ford vehicle: First, turn the ignition switch to OFF while simultaneously pressing the accelerator pedal and brake pedal. Then, turn the ignition switch to ON. After 20 seconds, the maintenance light will flash. Turn off the ignition switch and release the brake pedal and accelerator pedal to clear the maintenance reminder light. The appearance of a small wrench icon on the dashboard does not indicate a vehicle malfunction; it is merely a maintenance reminder symbol. This is part of the maintenance reminder function, indicating that the vehicle is due for service. Owners should visit a service center for inspection. The small wrench alert is a feature set by the car manufacturer to remind owners to perform maintenance at specified mileage intervals. After completing the maintenance, the reminder light must be reset following a specific procedure to turn it off.
Was this review help?
10
5
Share
More Forum Discussions

What are the tips for automatic transmission Subject 3?

Here are the tips for Subject 3: 1. Starting the car: First, adjust the seat and rearview mirror, check if the brake and accelerator are functioning properly, and ensure the surrounding environment is safe before starting. 2. Left and right turns and U-turns: Do not move the steering wheel within three seconds of turning on the turn signal, and ensure the speed matches the gear. 3. Passing bus stops, crosswalks, and school zones: Speed must not exceed 30 km/h, and look left and right to check for pedestrians. 4. Gear shifting operations: Complete the gear shifting operations within the specified time and distance. 5. Lane changing and overtaking: Do not move the steering wheel within three seconds of turning on the turn signal, and complete the maneuver within the specified time and distance. 6. Driving in a straight line: Speed must not be lower than 40 km/h, steering wheel movement must not exceed three degrees, and complete the straight-line driving within the specified distance.
5
1
Share

Is 8L/100km Fuel Consumption Considered High?

Fuel consumption is related to the engine displacement of a car. For a 2.0-liter engine, 8L per 100 kilometers is relatively low fuel consumption. For a 1.5-liter or 1.6-liter engine, 8L per 100 kilometers is considered average. A car's fuel consumption depends not only on the vehicle itself but also on the driver's habits and road conditions. More details about car fuel consumption are as follows: 1. Driving Habits: If a driver has a gentle driving style, the car's fuel consumption will be lower. If the driving style is more aggressive, the fuel consumption will be higher. When driving, it's best to press the accelerator lightly and avoid unnecessary overtaking. Look as far ahead as possible to anticipate traffic, allowing you to release the accelerator early and change lanes in advance. 2. Road Conditions: If you frequently drive in congested urban areas, the car's fuel consumption will be higher. If you often drive on smooth elevated roads or highways, the fuel consumption will be lower. In city driving, frequent stops at traffic lights and traffic jams are common. During these stops, although the car's mileage doesn't increase, the engine continues to run, leading to higher fuel consumption per 100 kilometers.
6
0
Share

What Causes Transmission Overheating?

Reasons for transmission overheating: 1. Insufficient lubricating oil in the transmission or use of lubricating oil with incorrect specifications; 2. Overly tight bearing assembly; 3. Overly tight gasket and washer assembly; 4. Excessively small meshing clearance of newly replaced gears. During an on-road stop inspection, touch various parts of the transmission housing by hand to check temperature. If the hand can tolerate the heat, the oil temperature is normal; if not, it indicates an overheating issue. To confirm transmission overheating, first check the lubricating oil level. If insufficient, replenish according to specifications; if the oil is too thin or deteriorated, replace it; if dry friction is caused by overly small assembly clearance (such as when bearings are assembled too tightly or overheating occurs near the bearing seat), conduct separate disassembly inspections and reassemble according to standards.
18
0
Share

How to Replace the Air Filter in a Golf 6?

Steps to replace the air filter in a Golf 6: 1. Open the engine compartment of the car and disconnect the tube on the right side of the air filter box; 2. After removing the tube, use a screwdriver to unscrew the screws on the air filter box and then remove it; 3. Once the filter box is removed, press the plastic buckle on the air filter and take out the old air filter; 4. Replace it with a new air filter, then reassemble the filter box by reversing the disassembly steps. The air filter is a type of filter, also known as an air cleaner, and together with the cabin air filter and oil filter, they are referred to as the three filters. Based on the filtration principle, air cleaners can be categorized into filtration-type air cleaners, centrifugal-type air cleaners, oil-bath-type air cleaners, and composite-type air cleaners. The air filter should be cleaned and replaced after the car has traveled a certain distance. It is important to note that some car air filters can only be replaced and not cleaned. When replacing, always use the original manufacturer's air filter to avoid unnecessary issues due to incompatibility.
13
3
Share

Where are vehicle trackers generally installed?

Vehicle tracker installation locations: 1. For hardwired trackers, they are installed near the dashboard, such as the front dome light area or under the windshield lower trim panel; 2. Wireless trackers can be installed in concealed locations like door panels, under the rear windshield trim, or inside the front bumper. Functions of trackers: 1. Stolen vehicle alert - when activated, the system triggers an alarm upon vehicle startup, providing real-time positioning with data transmitted every 10 seconds to ensure vehicle security; 2. Speed limit setting for driving safety reminders; 3. Route playback showing travel history and parking duration; 4. Remote command capability for arming/disarming the system.
14
4
Share

What are the symptoms of a broken car control arm?

Symptoms of a broken car control arm: 1. While driving, you may feel looseness in the chassis suspension and sometimes hear abnormal noises; 2. At high speeds, the vehicle's stability is not as good as before, handling becomes worse, and the direction cannot maintain a straight line; 3. If the control arm bushing is broken, it will also cause increased play between the suspension control arms. When driving on bumpy roads, there will be abnormal noises from the chassis, and the play in the chassis will also increase, which will affect the overall driving quality of the vehicle. The main function of the control arm is to support the body and shock absorbers, and to buffer vibrations during driving. The shock absorber plays a good auxiliary role for the lower suspension. The lower control arm, shock absorber, and spring work in harmony to form a complete suspension system, with the lower control arm responsible for supporting weight and steering.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.