···
Log in / Register

How to Cancel the Maintenance Reminder for the Boyue?

4 Answers
SpencerAnn
09/02/25 7:21am

To cancel the maintenance reminder for the Boyue, follow these steps: 1. Start the vehicle directly; 2. Press the button on top of the left light lever on the steering wheel until the trip interface is displayed on the instrument panel; 3. Press the mode button to enter the setup menu; 4. Find the reset maintenance mileage menu; 5. Press the mode button and select clear to reset. The Boyue has a body size of 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 2670mm. It is equipped with a 1.8T turbocharged engine, delivering a maximum power of 120 kW and a maximum torque of 250 Nm, paired with a 6-speed manual transmission.

Was this review help?
12
3
Share
LeMackenzie
09/15/25 2:33am

After driving for so many years, I've learned how to manually cancel the maintenance reminder on my Geely Boyue every time it pops up, as it saves me a trip to the service center. Here's the step-by-step process: First, turn the key to the 'on' position without starting the engine, which will light up the dashboard. Then, use the multifunction buttons on the right side of the steering wheel, usually a scroll wheel or directional keys, to navigate. I typically press a few times to enter the menu, find the 'Service' or 'Settings' option, and then select 'Maintenance Reset' or a similar name. Press the confirm button to reset the reminder light, and the dashboard display will confirm the action. The whole process takes just a few minutes and is quite convenient. However, it's important to note that if the reminder keeps reappearing, it might not be a system glitch but an actual need for maintenance, such as an oil change or a dirty filter. In such cases, it's best to visit a professional workshop to prevent engine wear due to delays. Additionally, checking the dashboard before driving is a good habit—don't just focus on clearing the reminder while ignoring the actual condition of the car.

Was this review help?
19
0
Share
Expand All
OMatteo
10/29/25 3:12am

As someone who often tinkers with cars, I find dealing with the Boyue maintenance reminder quite straightforward. First, after getting in the car, turn the ignition to the second position without starting the engine, allowing the system to complete its self-check. Then, use the steering wheel buttons to navigate to the vehicle settings section—I've seen some model years have a reset button in the lower left corner of the dashboard. Go into the service menu, select the maintenance reset option, and confirm to clear it. This reminder actually emphasizes the importance of regular maintenance for your car's health; ignoring it could lead to accumulated issues like insufficient lubrication or clogged filters. If you've tried and it doesn't work, it might be a button malfunction or a system glitch—it's advisable to connect an onboard diagnostic tool to read the fault codes or simply drive to a 4S shop for a technician's assistance. Developing a habit of checking the dashboard before driving each month can help prevent minor issues.

Was this review help?
14
2
Share
Expand All
MacCatherine
12/12/25 3:24am

Hey, I keep getting annoyed by the maintenance reminder light on my Boyue, but luckily it's not hard to cancel. First, turn the key to the first position without starting the engine, wait for the screen to light up, then use the steering wheel buttons to navigate randomly into the menu. Usually, you can find the service section, select maintenance reset, confirm, and the light will go off. If it gets stuck, try a few more times or disconnect the power and start over. Once the reminder is gone, you can drive with peace of mind, but don't slack off for too long, otherwise the engine might have issues. A few simple steps and you're good to go—how convenient.

Was this review help?
18
1
Share
Expand All
More Forum Discussions

How to Replace the Key Battery for Trumpchi GS4?

Trumpchi GS4 key battery replacement method: 1. Along the gap on the side of the car key, use your fingernail to pry open the clip or gently pry it open with a flat-head screwdriver to open the key; 2. After opening, you can see the battery compartment on the back cover. Remove the battery as instructed and then replace it with a new one. The body dimensions of the Trumpchi GS4 are 4545 mm in length, 1856 mm in width, and 1668 mm in height, with a wheelbase of 2680 mm. The Trumpchi GS4 features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The body structure is of a unibody design.
16
3
Share

Does Starting an Automatic Car at 3000 RPM Have Any Impact?

Starting an automatic car at 3000 RPM can cause certain damage to the transmission and clutch plates, and it is not recommended for drivers to operate the vehicle in this manner. There are three commonly used types of automatic transmissions in automatic cars: dual-clutch transmissions, CVT transmissions, and AT transmissions. Below is relevant information: 1. Dual-Clutch: Dual-clutch transmissions are connected to the engine via clutch plates, with a structure similar to manual transmissions, except they have an additional set of clutches and a gear-shifting control mechanism. One set of clutches in a dual-clutch transmission controls the odd-numbered gears, while the other set controls the even-numbered gears, offering fast gear shifts and relatively high transmission efficiency. 2. CVT: The internal structure of CVT transmissions is relatively simple, consisting of only two cone pulleys and a steel belt. The steel belt in a CVT transmission can move along the cone pulleys, allowing the transmission to vary speed and torque. CVT transmissions provide relatively smooth gear shifts and offer good reliability and durability. 3. AT: AT transmissions are connected to the engine via a torque converter and are the most mature and widely used automatic transmissions. They are also structurally complex automatic transmissions. AT transmissions contain numerous planetary gears inside, which are used to vary speed and torque.
1
4
Share

What is the fuel tank capacity of the Toyota CHR?

The fuel tank capacity of the Toyota CHR is 50L, and its fuel tank cap switch is located at the lower left side of the dashboard. A 50L fuel tank can allow the car to travel over 600 kilometers. When the fuel gauge light comes on, regardless of the car model, the vehicle can continue to drive for 30 kilometers. Beyond thirty kilometers, extra caution is needed while driving. The Toyota CHR has a body size of 4405mm in length, 1795mm in width, and 1565mm in height, with a wheelbase of 2640mm. The Toyota CHR features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of E-type multi-link independent suspension.
9
4
Share

What is the method for resetting the tire pressure on the Magotan?

The method for resetting the tire pressure on the Magotan: 1. Click the nine-dot option in the multimedia system; 2. Select the vehicle information option; 3. Choose the functional status; 4. Click the TYRES setting option; 5. Select the tire pressure monitoring display option; 6. Click confirm to complete the tire pressure reset. The Magotan's body dimensions are 4865 mm in length, 1832 mm in width, and 1471 mm in height, with a wheelbase of 2871 mm. The Magotan features front-wheel drive, a MacPherson strut front suspension, a multi-link independent rear suspension, and a unibody structure.
2
2
Share

Is the Eclipse Cross Engine Imported?

The Eclipse Cross engine is not imported; it is domestically produced. This is a compact SUV under the Mitsubishi brand, equipped with a 1.5-liter turbocharged engine across all variants, delivering a maximum power of 125 kW and a maximum torque of 250 Nm. This engine features hybrid injection technology and utilizes an aluminum alloy cylinder head and block, paired with either a 6-speed manual transmission or a CVT transmission. The Eclipse Cross has body dimensions of 4405 mm in length, 1805 mm in width, and 1685 mm in height, with a wheelbase of 2670 mm. It features a MacPherson strut independent front suspension and a multi-link independent rear suspension, with a unibody construction.
7
5
Share

How Many Motors Does the Sylphy Electric Have?

The Sylphy Electric has one motor, making it a single-motor model. The Sylphy Electric is a pure electric version based on the gasoline-powered Sylphy model. The dimensions of this car are 4677 mm in length, 1760 mm in width, and 1520 mm in height, with a wheelbase of 2700 mm. The motor of the Sylphy Electric has a maximum power of 80 kW and a maximum torque of 245 Nm. The motor is front-mounted, so this car is front-wheel drive. The front suspension of the Sylphy Electric uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. Its suspension structure is the same as that of the pure gasoline version.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.