How to Cancel the Maintenance Reminder for CS75?

1 Answers
LeCharlotte
07/30/25 1:19am
Automobile maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the automobile, also known as automobile servicing. The method to eliminate the maintenance reminder for Changan CS75 is as follows: 1. First, turn the car key to the ON position (turn the key twice, or press the start button twice for keyless start). 2. Then press the selection button on the steering wheel; hold the reset button for about 5 seconds (keep holding the reset button without releasing). 3. Turn off the power, remember not to release the reset button, then turn on the vehicle power again to eliminate the maintenance reminder.
Was this review help?
15
2
Share
More Forum Discussions

Does changing the engine have any impact?

Changing the engine does have impacts, and the reasons are: 1. Engine replacement can cause vehicle depreciation; 2. Engine replacement may affect the car's power and fuel consumption; 3. Disassembling and assembling the engine can impact the car's wiring and other components; 4. After replacing a new engine assembly, it is necessary to register with the vehicle management office and update the new engine number; 5. The cost of engine replacement and repair is high. Precautions for car engine maintenance include: 1. Using high-quality engine oil can provide lubrication, cleaning, cooling, sealing, and wear reduction; 2. Using qualified coolant; 3. Regularly cleaning the radiator scale; 4. Periodically removing carbon deposits from the car; 5. Replacing the car's three filters on time.
15
5
Share

How Long is the Grace Period for Car Insurance Lapse?

If a car is idle and not in use, there is no so-called grace period for insurance lapse; however, for vehicles on the road, insurance must be renewed as soon as possible before the lapse to avoid affecting annual inspections and other protections. Below is more information about car insurance: Definition: Car insurance is a type of commercial insurance that covers liability for personal injury or property damage caused by natural disasters or accidents involving motor vehicles. Compulsory Traffic Insurance: Compulsory traffic insurance is a mandatory national insurance that every vehicle owner must purchase. If this insurance is not purchased and the vehicle is driven, it may be impounded (until the insurance is obtained and displayed in the designated location), with fines and penalty points imposed. Compulsory traffic insurance mainly covers personal injury and property damage to victims (excluding the vehicle's occupants and the insured) in traffic accidents. However, the compensation limits of compulsory traffic insurance are limited and may not cover large-scale personal injury accidents.
3
0
Share

What are the maintenance items for a car at 40,000 kilometers?

The maintenance items for a car at 40,000 kilometers include: 1. Inspection of the engine, chassis, and transmission; 2. Cleaning of the engine and throttle body; 3. Cleaning of the air conditioning system; 4. Replacement of brake fluid, coolant, and transmission fluid; 5. Inspection of the air filter and cabin air filter; 6. Replacement of engine oil, oil filter, and spark plugs; 7. Inspection of the wheels and braking system. The benefits of car maintenance are: 1. Ensuring the vehicle operates in optimal condition; 2. Improving vehicle efficiency and reducing wear on parts and tires; 3. Preventing issues during travel and ensuring personal safety; 4. Reducing noise and environmental pollution; 5. Maintaining the vehicle's appearance and preventing unnecessary damage.
2
2
Share

How to reset the maintenance reminder on the Lavida?

The method to reset the maintenance reminder on the Lavida is: 1. Press and hold the protruding button on the instrument panel, then turn on the ignition switch; 2. Release the instrument panel button, then press and hold the minute adjustment button on the time adjustment knob; 3. Turn off the ignition switch, then release the minute button; 4. Restart the ignition switch to complete the process. The Lavida is a compact 4-door, 5-seater sedan with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
2
4
Share

Is the Tharu a four-wheel drive vehicle?

The Tharu is a four-wheel drive vehicle, which means it has front and rear differential-linked four-wheel drive, with engine power transmitted to all four wheels, allowing all four wheels to provide traction. Taking the 2021 Tharu as an example, its body dimensions are: length 4453mm, width 1841mm, height 1632mm, wheelbase 2680mm, fuel tank capacity 51l, and the body structure is a 5-door, 5-seat SUV. The 2021 Tharu is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
7
3
Share

When driving a manual transmission car, should you release the handbrake first or shift gears first?

When driving a manual transmission car, you should shift gears first and then release the handbrake. The correct method to start a manual transmission car is: 1. Press the clutch pedal completely with your left foot; 2. Shift the gear lever into first gear; 3. Turn on the left turn signal and honk the horn to alert vehicles and pedestrians in front and behind; 4. Release the handbrake and gently lift the clutch with your left foot; 5. Lightly press the accelerator with the ball of your right foot to start. The gears of a manual transmission are: 1, 2, 3, 4, 5, and reverse. The working principle of a manual transmission is: by manually moving the gear lever, the gear engagement position inside the transmission can be changed, altering the gear ratio to achieve the purpose of shifting.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.