How to cancel the maintenance reminder for Changan CS35?
4 Answers
Methods to cancel the maintenance reminder for Changan CS35: 1. Press and hold the reset button on the dashboard, press and hold the short-distance counter reset button below the tachometer; 2. Turn on the ignition, set the ignition switch to the ON position, release the short-distance counter reset button, and the SERVICE indicator will appear on the display; 3. Release the dashboard reset button to reset the reminder message; 4. Rotate the reset button clockwise once, pull out the minute button on the clock, turn the minute button to the right, and the mileage will be displayed on the screen; 5. Turn off the ignition and turn it back on, set the ignition switch to the ON position, and the SERVICE indicator will disappear.
When I was driving the Changan CS35 before, I also encountered the issue of the maintenance reminder constantly popping up. I remember that time the reminder was up, but I hadn't had time to go for maintenance. After checking, I found out that the cancellation method was actually quite simple: first, turn on the ignition without starting the engine, then look at the prompt message on the dashboard, press and hold the Trip Reset button on the left without releasing it for about 10 seconds until the maintenance setup menu appears on the screen, then release it. Press a few more times to adjust to the cancel option and confirm. The whole process takes about one or two minutes, but remember not to rush during the operation because random pressing may accidentally adjust other settings. I think the intention of this reminder is good, ensuring the car is maintained on time to avoid engine problems, but it's quite convenient to temporarily cancel it if you're really too busy. The key is to record the maintenance cycle yourself after it's done, so as not to delay the important matters, otherwise, car problems would not be worth it.
If your Changan CS35 dashboard keeps popping up with maintenance reminders, don't panic—I'll show you how to clear it. First, get in the car and turn the key to the power-on position without starting the engine. Then, look for the small icon on the dashboard, usually an oil can symbol with an English prompt nearby. Locate the Trip Reset button, typically found below the steering wheel or near the turn signal stalk. Press and hold it for 5-10 seconds until a menu appears. Navigate to the maintenance settings option using the button, scroll to select "OFF" or "Reset," and confirm. The entire process should take no more than 15 seconds—doing it too quickly may render it ineffective. Note: If multiple attempts fail, it might be a system bug requiring a 4S shop to clear the code with a computer. Regular maintenance is recommended every 5,000 km or six months. Neglecting oil system care can cause engine wear—safety first. Knowing these small car tips can save you a lot of hassle.
Canceling the maintenance reminder on the Changan CS35 is quite simple, mainly through manually resetting it via the dashboard menu. First, power on the vehicle without starting the engine, locate the Trip Reset button and hold it for 5-10 seconds to access the settings, then navigate to the maintenance option and turn it off. Be steady-handed during the operation to avoid accidentally pressing other buttons, which could affect the speedometer. This feature is designed to remind you to change the oil or filter on time, preventing engine overheating damage. While canceling it is convenient, make sure to note the next maintenance date clearly. If the button doesn’t respond, it might be a fuse issue—consult the manual or contact a professional at the 4S shop instead of tampering with the wiring yourself to avoid sparks. Proper vehicle maintenance ensures a worry-free drive, and I always remind myself not to slack off.
