How to Cancel the Maintenance Light on Tiggo 5?

What grade of gasoline should a Grand Cherokee use?

Grand Cherokee should use 93 octane gasoline. It's best to refuel when the fuel light comes on: Generally, it is not advisable for fuel-injected vehicles to wait until the fuel is nearly depleted before refueling. This is mainly because the fuel pump of fuel-injected vehicles is installed in the fuel tank and relies on gasoline for cooling. If the fuel is about to run out, it can easily cause the fuel pump to overheat and burn out due to insufficient cooling. Refueling at night or early morning is more cost-effective: The best time to go to the gas station for refueling is at night or early morning. This is because gasoline is charged by volume rather than by weight. At night or early morning, the volume of gasoline is relatively smaller, and the same volume of gasoline can have better quality, is less likely to foam or evaporate, making it more economical to refuel during these times.

14

5

Share

Can You Idle in Place with the Gear in P?

Automatic transmission vehicles can idle in place with the gear in P, such as when stopping at a red light. Here is an introduction to the gear positions of automatic transmission vehicles and precautions for their use: 1. P (Park): The parking gear. When the vehicle is completely stationary, press the unlock button at the front of the gear lever to shift into P. 2. R (Reverse): The reverse gear. When the vehicle is completely stationary, press the brake pedal and the unlock button at the front of the gear lever to shift into R. After releasing the brake pedal, gently press the accelerator to move the vehicle backward. 3. N (Neutral): The neutral gear. You can directly shift from R or D into N. When shifting out of N, you need to press the brake pedal. 4. D (Drive): The drive gear. You can directly shift from N into D. This gear is generally used when the vehicle is moving forward, and the system will automatically shift gears based on engine load and speed.

12

3

Share

Where Can I Check Car Insurance?

You can check online, inquire by phone, or visit a counter. Below are the detailed methods: Online Inquiry: Log in to the website of the insurance company where the vehicle is insured or the traffic management bureau, and follow the prompts to check the information. This mainly reduces labor costs and improves query efficiency, allowing you to find vehicle insurance information faster and more accurately. Alternatively, some insurance companies or third-party service providers have their own app software, which can be downloaded for more convenient and quicker queries. Phone Inquiry: When making a phone inquiry, be sure to verify the accuracy and authenticity of the phone number. You can ask questions such as: What insurance has the vehicle had each year? What kind of accident records are there? How much was spent? All this information can be checked, but you will need to provide some personal information and the license plate number. This can also help determine if there have been any past accident records and provide more valuable information when making a purchase decision. Counter Inquiry: Visiting a counter allows for detailed access to past vehicle information, though it can be a bit troublesome as you need to present relevant documents, such as the insurance policy, vehicle registration certificate, ID card, etc.

7

1

Share

How to prevent crossing the line at curved exits?

There are two types of exits: left exit and right exit. For a left exit, when the front wheels of the vehicle are just about to leave, turn the steering wheel half a turn to the right to avoid the rear wheels crossing the line. For a right exit, the operation is the opposite: when the front wheels are just about to leave the curve, turn the steering wheel half a turn to the left to avoid the rear wheels crossing the line. Here are the precautions for curved entrances and during driving: 1. Entrance: There are two types of entrances: left entrance and right entrance. For a left entrance, the vehicle should stay as close as possible to the right side of the road before turning the steering wheel to the left. For a right entrance, the opposite applies: the vehicle should stay as close as possible to the left side of the road before turning the steering wheel to the right. This is to account for the vehicle's inner wheel difference and avoid the rear wheels crossing the line during the turn. 2. During driving: The front of the vehicle should stay close to the side of the road. During a left turn, the front of the vehicle should follow the right side line, and during a right turn, the front of the vehicle should follow the left side line.

15

2

Share

How long does it take for the points to be deducted after passing the study-based point reduction exam?

Study-based point reduction operates on a 12-month scoring cycle. A maximum of 6 points can be deducted in one cycle through this method. Below is extended information about study-based point reduction: Prerequisites for study-based point reduction: Not all drivers are eligible for study-based point reduction. It requires having incurred penalty points from traffic violations. In other words, if there are no traffic violations or points deducted, there is no need to use study-based point reduction for learning or deducting points. Additionally, study-based point reduction cannot be initiated immediately after a violation occurs. The violation must first be confirmed, fines paid, and points deducted using the driver's license before study-based point reduction can be applied to offset the points. Limitations of study-based point reduction: Whether points are obtained through direct training and exams or accumulated through public welfare activities, both types of points can be combined but cannot exceed the total points deducted from the driver's license. Within one scoring cycle, a maximum of 6 points can be deducted through study-based point reduction. Exceeding this limit prevents further point deductions through study. The combined points from both methods cannot exceed 6; any excess is invalid.

3

Share

What does it mean when the EDC warning light comes on in a diesel vehicle?

Truck EDC light on means there is a fault in the engine electronic control system. EDC (Electric-Diesel-Control) stands for Electronic Diesel Control. When the EDC engine warning light is on in a truck, fuel consumption will increase. This is usually caused by damage to the engine's high-voltage circuit, fuel injectors, or oxygen sensors. It is recommended to promptly visit a 4S shop for inspection and repair. Here is more information about EDC: 1. Meaning of EDC light on: The EDC light on indicates an engine circuit fault. This is usually caused by starter motor repairs. Since the starter motor has a loopback system, most maintenance personnel replace it with an older starter switch that lacks a loopback system. As a result, the computer detects a fault, but it does not affect usage. 2. Reasons for truck EDC light on: There are many reasons for the EPC light to come on in a truck, including severe throttle carbon buildup, excessively high engine temperature, vehicle intake system failure, ECU failure, etc.

16

1

Share

How to Cancel the Maintenance Light on Tiggo 5?

What grade of gasoline should a Grand Cherokee use?

Can You Idle in Place with the Gear in P?

Where Can I Check Car Insurance?

How to prevent crossing the line at curved exits?

How long does it take for the points to be deducted after passing the study-based point reduction exam?

What does it mean when the EDC warning light comes on in a diesel vehicle?

Why Does Using the Air Conditioner Consume So Much Fuel?

Should Spark Plugs with Yellow Roots Be Replaced?

Can I renew my car insurance after it expires?

What are the differences between Michelin Primacy LC and Primacy 4?