···
Log in / Register

How to Cancel the Maintenance Display on the X-Trail?

4 Answers
MackenzieLee
07/28/25 3:44pm
The method to cancel the maintenance display on the X-Trail is: 1. Operate the switch button and confirm button on the left side of the steering wheel to enter the maintenance interface; 2. Click the maintenance option, then select the "Engine Oil and Filter" option; 3. Choose the reset option below the number, adjust the number on the right to 5000 kilometers, and click confirm to cancel. The X-Trail is an SUV model launched in Japan, with body dimensions of 4635mm in length, 1790mm in width, and 1700mm in height, a wheelbase of 2630mm, and a minimum ground clearance of 212mm. It is equipped with a 2.0L XE Comfort MT 4WD engine and uses a manual transmission (MT).
Was this review help?
5
0
Share
CoreyFitz
08/11/25 8:03pm
I often repair my car myself, so I'm quite familiar with canceling the maintenance display. For the X-Trail, when the maintenance reminder appears on the dashboard, the cancellation method usually involves entering the vehicle settings menu. First, park the car and turn off the engine, then turn the ignition on without starting the engine (i.e., turn the key to the ACC position). Next, press the control button on the steering wheel or a combination of buttons below the dashboard, such as holding the INFO button for about five seconds, and the maintenance reset option will appear. Select confirm reset, and the reminder will disappear. It's important to perform this operation after completing the actual maintenance; otherwise, it's just a reminder without any real effect. If the car is older, check if the sensors are functioning properly to avoid false alarms affecting the driving experience. Remember, regular maintenance can help the car last longer.
Was this review help?
17
5
Share
Expand All
DeReed
08/11/25 8:04pm
I've been driving for over a decade, and the maintenance reminder on my X-Trail keeps popping up, which is quite annoying. To cancel it, you generally need to hold the OK button for a few seconds while the ignition is on, then select reset maintenance information. If you're unsure how to do it, check the owner's manual for detailed steps and follow them. Importantly, make sure you've actually performed the maintenance before canceling the reminder, otherwise, if the warning disappears but the car's issues remain unresolved, it could lead to bigger problems. Paying regular attention to your vehicle's condition, such as checking the engine oil and tires, can help reduce the frequency of these reminders.
Was this review help?
20
3
Share
Expand All
JaylaLynn
09/29/25 5:50am
The maintenance reminder is for safety, alerting you to check the vehicle. Canceling it isn't difficult: first, turn on the ignition without starting the engine, navigate to the information menu using the dashboard buttons, locate the maintenance option, and click reset. However, you must confirm that regular maintenance has been performed recently; otherwise, blindly canceling it may overlook potential issues. It's advisable to observe if the reminder reappears after cancellation. If it appears frequently, it might indicate a system problem requiring professional inspection.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

Can a 20-year-old car still pass the annual inspection?

A 20-year-old car can still undergo the annual inspection. As long as the vehicle has not reached the scrapping standard, it can continue to be used and, naturally, must still undergo annual inspections. The items checked during the annual inspection include: 1. Checking whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether the main assemblies have been replaced and match the initial inspection records; 2. Verifying whether the vehicle's braking performance, lighting, exhaust, and other safety features comply with relevant regulations; 3. Checking whether the vehicle has been modified, remodeled, or altered, and whether the driving license, license plate, and all registered vehicle records match the actual condition of the car; 4. Inspecting whether the license plate, driving license, and the enlarged license plate characters printed on the vehicle are damaged, altered, or illegible, and whether they need to be replaced.
15
5
Share

How to Identify the Authenticity of 3M Car Film?

Identifying the authenticity of 3M car film involves the following methods: 1. Smell: Genuine 3M car film has no noticeable odor. If there is a strong, irritating smell, it is likely a counterfeit product. 2. Logo: Authentic 3M car film features the 3M logo distributed across its surface. This logo cannot be wiped off with dry rubbing; it requires cleaning agents or alcohol to remove, which can also help determine authenticity. 3. Roll Tube: Genuine 3M car film comes in a plastic roll tube with a red core, printed with the film's serial number for verification. Additionally, it includes a professional anti-counterfeit label that tears easily upon removal. Counterfeit products often use cardboard tubes, and if plastic, further verification via serial number and anti-counterfeit marks is necessary. 4. Adhesiveness: The adhesive layer of genuine 3M car film is dry and only becomes sticky under pressure. If it feels sticky to the touch immediately, it is usually a fake product.
9
5
Share

What is mainly replaced during the first car maintenance?

The key items for the first maintenance of a new car are changing the engine oil and oil filter. Replacing the engine oil and oil filter during the first maintenance is crucial because debris and impurities generated by the engine operation, if not promptly removed, may cause abnormal damage to the internal cylinders. The first car maintenance must be done within three months. It is stipulated that the first maintenance for a new car should be performed at three months or 5,000 kilometers, whichever comes first. This means that even if you have only driven 2,000 kilometers in three months, you still need to go for the first maintenance, or if you reach 5,000 kilometers in two months, you should also go for the first maintenance. After the first maintenance is done, the second maintenance or subsequent services can be delayed by one or two months. The free maintenance items for the first car maintenance generally include: Changing the engine oil, tightening chassis screws, checking tire pressure, inspecting all vehicle fluids, checking all vehicle lights, cleaning the air filter, cleaning the air conditioning filter, cleaning engine dust, and topping up windshield washer fluid and radiator coolant. Additionally, some additional paid services may be recommended, such as engine internal cleaning or installing an engine guard. The benefits of the first car maintenance are: Ensuring the vehicle is in excellent performance condition; improving vehicle efficiency and reducing wear on parts and tires; enhancing driving safety; preventing potential hazards; reducing noise and environmental pollution; maintaining the vehicle's appearance and preventing damage. Preparation for the first maintenance: Before going for the first maintenance, call the 4S shop to make an appointment. Due to the increasing number of vehicles, service workshops at 4S shops are often crowded. Without an appointment, you might have to wait for hours before getting service. Items to bring for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; and the car purchase invoice. If you encounter any issues or have questions while driving, note them down and inform the staff during the first maintenance registration. This will help the technician inspect all potential problems during the first maintenance.
12
3
Share

What does ctv mean?

There is no ctv, only cvt. CVT refers to the continuously variable transmission, which is a type of transmission in automatic vehicles. It can continuously obtain any transmission ratio within the speed range, achieving a good match between the transmission system and engine conditions through continuous variable transmission. Transmissions are divided into AT (automatic transmission), CVT (continuously variable transmission), AMT (automated manual transmission), and DCT (dual-clutch transmission). Transmission working principles: 1. Manual transmissions consist of gears and shafts, achieving speed and torque changes through different gear combinations. 2. Automatic transmissions consist of a torque converter, planetary gears, and a hydraulic control system, achieving speed and torque changes through hydraulic transmission and gear combinations.
18
0
Share

Can You Still Drive When the Engine Yellow Light is On and the Car Shakes?

It is best not to drive when the engine yellow light is on and the car shakes. It is recommended to first check the cause of the fault before proceeding with any repairs. The following are possible causes of the fault: 1. Misfire: One of the cylinders is not firing. 2. Carbon buildup: Excessive carbon buildup in the throttle. 3. Ignition coil: Issues with the ignition coil. 4. Sensor: If the engine fault indicator light occasionally comes on, it may be due to a problem with a sensor in an electronic control system, such as the throttle position sensor, or it could be an issue with certain actuators, such as a fuel injector not working properly, or a problem in the ignition system.
7
0
Share

Where is the Air Conditioning Filter of the Arrizo 7 Located?

Arrizo 7's air conditioning filter is located behind the glove box on the driver's side. After removing the plastic panel and unscrewing the screws at the end of the glove box, you can see the air conditioning filter by taking off the cover plate. The functions of the air conditioning filter are: 1. To provide fresh air; 2. To ensure safety and hygiene; 3. To absorb harmful substances; 4. To filter solid impurities. Taking the 2017 Arrizo 7 as an example, its body structure is a four-door, five-seater sedan, with body dimensions of: length 4652mm, width 1825mm, height 1483mm, wheelbase of 2700mm, front track of 1550mm, rear track of 1540mm, fuel tank capacity of 50l, trunk capacity of 455l, and curb weight of 1465kg.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.