How to cancel Ford Focus MyKey?

1 Answers
SanReid
07/29/25 6:29pm
The method to cancel Ford Focus MyKey is: 1. Enter the main menu, select settings, then choose MyKey; 2. Scroll to 'Clear MyKey' and press the OK button; 3. Hold the OK button until the display shows 'All MyKeys Cleared'. The Ford Focus has a body size of: length 4647mm, width 1810mm, height 1468mm, with a wheelbase of 2705mm. The body structure is a 4-door, 5-seater sedan with a fuel tank capacity of 53 liters. The Ford Focus is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 90 kW at 6500 rpm and a maximum torque of 153 Nm at 4500 rpm.
Was this review help?
5
5
Share
More Forum Discussions

Is the red terminal on a battery the positive or negative pole?

The red terminal on a battery is the positive pole, while the black one is the negative pole. The method for connecting battery terminals is as follows: 1. Open the two fastening buttons of the thermal insulation cover; 2. Use a wrench to loosen the fastening nut on the negative terminal; 3. Pry open the fastening block with a flat-head screwdriver; 4. Connect both positive terminals with a red cable; 5. Connect both negative terminals with a black cable. Battery maintenance methods include: 1. Avoid parking the car in open parking lots for extended periods; if long-term parking is necessary, remove and take the battery with you; 2. Avoid repeatedly starting the vehicle without intervals; 3. Start the car periodically to maintain sufficient battery charge; 4. Regularly inspect battery components and connecting wires; 5. Periodically clean the battery terminals and apply specialized grease to protect the wiring harness; 6. Avoid using car electronics after the engine is turned off.
20
4
Share

How to Disassemble the Headlight Switch of the New Lavida?

The steps to disassemble the headlight switch of the New Lavida are as follows: 1. Unplug the lighting combination switch connector of the car; 2. Unplug the connector linked to the wiper combination switch; 3. Remove the fixing screws of the headlight combination switch; 4. Use a screwdriver to remove the fixing screws of the headlight combination switch assembly. The body dimensions of the New Lavida are 4608mm in length, 1743mm in width, and 1465mm in height, with a wheelbase of 2610mm. It is equipped with 1.2T, 1.4T, and 1.5L naturally aspirated engines, paired with a 5-speed manual or 6-speed automatic transmission. The 1.4T engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm; the 1.5L engine provides a maximum power of 85 kW and a maximum torque of 150 Nm.
19
4
Share

Can the Engine Still Run with Piston Slap?

Engine piston slap means the engine cannot run. The causes of engine piston slap are: 1. Excessive wear of the piston and cylinder, resulting in excessive clearance; 2. Incorrect piston installation direction or piston deformation; 3. Poor lubrication of the cylinder wall; 4. Bent or twisted connecting rod; 5. Clogged oil passages; 6. Severe carbon buildup in the combustion chamber; 7. Excessive fuel injection advance angle; 8. Excessively fast combustion speed of the combustible mixture, leading to excessively high pressure in the cylinder; 9. Overly thin cylinder gasket or excessive wear of the cylinder block top surface, increasing the compression ratio of the diesel engine. The effects of engine piston slap are: 1. Loud noise; 2. Increased engine compression ratio, making combustion prone to knocking; 3. Causing piston cracking and cylinder head deformation; 4. Causing connecting rod bending deformation; 5. Damaging the cylinder head.
12
5
Share

What are the steps for remote starting the Emgrand GL?

The steps for remote starting the Emgrand GL are: 1. Stand within the remote control range; 2. Press the vehicle's lock button to lock the car; 3. Wait for the vehicle's lights to flash, indicating the operation was successful; 4. Hold down the remote start button at the very bottom of the remote control; 5. The vehicle will start remotely successfully. Taking the 2020 Geely Emgrand GL as an example, it belongs to the compact car category, with body dimensions of: length 4725mm, width 1802mm, height 1478mm, a wheelbase of 2700mm, a fuel tank capacity of 55 liters, and a curb weight of 1335kg. The 2020 Geely Emgrand GL features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 141PS, a maximum power of 104kW, a maximum torque of 235Nm, and is paired with a 6-speed manual transmission.
10
1
Share

What should be noted when driving an automatic transmission car?

When driving an automatic transmission car, the following points should be noted: 1. Do not place your left foot on the brake pedal to avoid mistaking the accelerator for the brake in emergencies; 2. Avoid coasting in neutral as it can easily damage the transmission; 3. When starting the car, do not release the brake too slowly as it may harm the engine; 4. Do not rev the engine when starting the car, as it can cause a sudden increase in speed and lead to safety hazards; 5. When parking, first shift into N (Neutral) gear before shifting into P (Park) gear. The correct method to start an automatic transmission car is: 1. After sitting in the driver's seat, press the start button directly; 2. Depress the brake pedal and press the start button to ignite and start the engine; 3. Release the foot brake and optionally warm up the car while stationary; 4. Depress the brake pedal again and shift into D (Drive) gear; 5. Release the handbrake and slowly lift the foot brake to start moving; 6. Gently press the accelerator according to road conditions for safe driving.
18
3
Share

What is 2.5 bar tire pressure in psi?

A tire pressure of 2.5 bar is approximately 36.25 psi. Both bar and psi are units of pressure, with 1 bar approximately equal to 14.5 psi. Introduction to Tire Pressure: Tire pressure refers to the air pressure inside the tire, which is essentially the 'blood pressure' of a car. The level of tire pressure plays a crucial role in the performance and power of the vehicle. According to the international standard GBT2978-2008, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Hazards of Overinflated or Underinflated Tires: For tires, pressure should not be too high or too low. Overinflated tires reduce the contact area with the ground, leading to poor grip, which affects the car's handling and driving stability. Underinflated tires can cause wave-like deformation during high-speed driving, which not only shortens the tire's lifespan but also increases the risk of a blowout.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.