How to Call the Owner to Move the Car When It's Blocked?

1 Answers
MacCarmen
07/30/25 9:09am
When your vehicle is blocked by another car, you can notify the owner through the following methods: 1. Call the 114 hotline: You need to provide your license plate number and phone number to 114, along with the other party's license plate number. 114 will notify the owner to move the car via text message or phone call. 2. Call 122 or 110: Dial 122 or 110 to seek assistance from the traffic-specific hotline. Inform them of the situation, and the traffic hotline will contact the owner. 3. Use the One-Click Move Car feature: The One-Click Move Car feature is a convenient service introduced by the 12123 traffic management department. When you need to move a car, using this feature will automatically compare the vehicle information in the database. The system will then query and retrieve the owner's phone number in the background and send a move car notification via SMS or app push message.
Was this review help?
18
4
Share
More Forum Discussions

What is the top speed of the Sundiro Honda NS125D?

The top speed of the Sundiro Honda NS125D is 92km/h. Introduction to the top speed of motor vehicles: The top speed refers to the highest driving speed that a motor vehicle can achieve on a horizontal and well-paved road (concrete or asphalt). It is the speed at which the driving resistance and driving force of the vehicle are balanced under windless conditions on a flat road surface. It is one of the three evaluation indicators of a vehicle's dynamic performance. Factors affecting the top speed of motor vehicles: Engine power, maximum engine torque, rotational speed at maximum torque, transmission ratio of the drivetrain, driving resistance, etc. The top speed is measured on a flat and windless road surface with zero acceleration, so the gradient resistance and acceleration resistance are zero. Therefore, the main resistance factors affecting the top speed are air resistance and rolling resistance.
16
5
Share

How Many Cylinders Does the Subaru Outback Have?

Subaru Outback is equipped with a 6-cylinder 3.0L horizontally opposed engine. Exterior Dimensions: The Subaru Outback is an SUV model under the Subaru brand. Its exterior dimensions are 4775mm in length, 1820mm in width, and 1615mm in height, with a wheelbase of 2745mm. The luggage compartment volume ranges from 512 liters to 1801 liters, and the curb weight is 1643 kilograms. Vehicle System Configurations: The Subaru Outback is equipped with an anti-lock braking system, dynamic stability control system, emergency brake assist system, electronic brake-force distribution system, traction control system, as well as an engine immobilizer system.
5
2
Share

How many kilograms should the cylinder head screws of the Bora be tightened to?

The cylinder head screws of the Bora need to be tightened to 8-9 kilograms, the connecting rods to 5-6 kilograms, and the crankshaft to 10 kilograms. Method for tightening cylinder head screws: First, tighten from the middle to both sides, initially to 50% of the final torque, then loosen them all. Next, tighten again from the middle to both sides to 50%. Finally, follow the same middle-to-sides approach to fully tighten the cylinder head screws. Precautions when tightening cylinder head screws: Do not overtighten, as this can cause excessive stress on the bolts, leading to stripped internal threads or even breaking the bolts. Therefore, always confirm the torque specifications before tightening.
14
2
Share

Will Deformed Rear Wheels Cause Steering Wheel Vibration?

Deformed rear wheels can cause steering wheel vibration. Symptoms of tire deformation include: Driving difficulties: If the car is used improperly, it may lead to tire deformation. Once the tires are deformed, they must be replaced immediately. Otherwise, it will affect the car's driving performance, potentially causing issues such as veering during driving, wheel vibration, abnormal wear, and other faults. Bulging: If there are quality issues with the tires, deformation during movement can also cause the rubber surface to crack and the internal structural layers to separate, leading to bulging. Once the tire is deformed, cracked, or bulging, the internal structure of the tire changes, significantly reducing its pressure resistance, load-bearing capacity, and speed tolerance.
11
4
Share

Is It Normal for Acceleration to Slow Down After an Oil Change?

It is not normal for acceleration to slow down after an oil change, and timely inspection and repair are required. Below is a detailed explanation of the possible reasons: Oil Quality Issues: The reason for slower acceleration after an oil change could be abnormal oil quality. When the oil used is of low quality, it may cause the vehicle's speed to decrease. Oil Viscosity Issues: The quality of engine oil for household cars is related to the vehicle's acceleration performance. The reason for slower acceleration after an oil change could be abnormal viscosity of the replaced oil. If the oil's viscosity is too high, acceleration will certainly not be as fast as with lower-viscosity oil. You can choose the oil viscosity based on your specific requirements.
10
0
Share

What to Do When the USB Port of Trumpchi GS8 Is Not Responding?

Here are the reasons and solutions for the unresponsive USB port in the Trumpchi GS8: 1. The USB drive may be faulty. If the USB drive format is incorrect, it needs to be formatted or replaced with a FAT32-formatted USB drive. 2. If the USB drive is fine, check the fuse at the car's USB port. Below are extended guidelines for using the USB port: 1. Charging should only be done when the car's engine is running to avoid damage to electrical devices due to unstable power supply. 2. Do not draw too much power, as it may overload and damage the car battery and alternator. 3. Avoid using the USB port during thunderstorms to prevent lightning strike accidents. 4. Do not use the USB port in humid environments.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.