How to Call for Help When a Tire Blows Out on the Highway?

2 Answers
Claudia
07/25/25 10:15am
Tire blowout on the highway requires first firmly holding the steering wheel for self-rescue. Below are the methods for self-rescue during a tire blowout on the highway: 1. Method: Stay calm, use engine braking to allow the car to coast slowly, also known as manual gear shifting. Do not suddenly release the accelerator pedal; instead, gradually ease off the throttle because the deceleration from a blowout is very strong. Avoid stepping on the brake pedal, as it can further destabilize the car, leading to a spin or rollover. Hold the steering wheel firmly to maintain control of the direction and avoid sharp turns. You can use intermittent braking, rhythmically pressing and releasing the brake. 2. Precautions: Whether the tire blowout occurs on the highway or an ordinary road, whether calling for help or changing to a spare tire yourself, the first thing to do when encountering a blowout is to hold the steering wheel firmly. Continuously applying the brakes can lead to the danger of a rollover. Then, remember to turn on the hazard lights and place a warning triangle behind the car.
Was this review help?
7
2
Share
Sally
08/11/25 7:38pm
I've been driving long-distance for decades and have experienced several highway tire blowouts. The key lessons are: First, don't panic. Firmly grip the steering wheel and avoid slamming on the brakes, then slowly maneuver to the emergency lane or a safe area. Immediately turn on your hazard warning lights, retrieve the triangle warning sign from the trunk, and place it at least 50 meters behind your vehicle to ensure visibility. Keep your phone handy and directly call the highway rescue number 12122 or traffic police at 122, clearly stating your location and vehicle condition. Stay inside the car and avoid unnecessary movement—safety first. Regularly check tire wear and pressure to prevent such emergencies. A blown tire not only damages the tire but is also dangerous; acting calmly can turn danger into safety.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

What Type of Fuel Does Haval Use?

Haval H6 officially recommends gasoline with an octane rating of 92 or above. 92-octane gasoline has an octane value of 92 and is suitable for mid-range vehicles (with relatively low compression ratios). Definition of gasoline octane ratings: Different gasoline octane ratings indicate varying levels of octane in the fuel, which means the anti-knock additives differ. Whether it's 92 or 95 octane gasoline, the fuel quality is the same and unrelated to cleanliness. Differences between gasoline octane ratings: The main difference lies in the amount of anti-knock additives. The anti-knock performance of the fuel is characterized by the octane value, so different engines have varying requirements for anti-knock values. Different octane ratings are suitable for engines with different compression ratios.
4
1
Share

What is the actual fuel consumption of the Peugeot 308?

The actual fuel consumption of the Peugeot 308 varies slightly depending on the car version, generally around 7-10L per 100 kilometers. Methods to reduce fuel consumption for the Peugeot 308: Avoid bad driving habits such as sudden acceleration, hard braking, and sharp steering; do not use low-quality gasoline, and maintain the car regularly, such as frequently cleaning engine carbon deposits. Reasons for significant differences in the actual fuel consumption of the Peugeot 308: The main reasons for the significant differences in the actual fuel consumption of the Peugeot 308 include variations in the production year of the car, with older versions generally having higher fuel consumption. Additionally, different versions of the car may have slight differences in weight, and individual driving habits also contribute to the variation.
15
3
Share

Can the gear shift knob of the Passat be replaced?

The gear shift knob of the Passat can be replaced. The correct usage of the button on the gear shift should be: After the car is parked, first press the brake to shift the gear lever to N, then engage the handbrake, release the foot brake and turn off the engine, and finally push the gear lever into P. Precautions for using the plus and minus buttons: When using the plus and minus buttons, pay attention to whether you are using the gear shift grip or the paddle shifters. The gear shift grip is usually pushed forward for "+" one gear and pulled backward for "-" one gear. If you are using paddle shifters, there are usually markings.
2
2
Share

What Causes Excessive Dry Friction on a Car's Windshield?

The reason for excessive dry friction on a car's windshield is the poor quality of the wiper blades. There are four maintenance methods for wipers: 1. Dust: On sunny days, use the wipers to remove dust from the windshield surface. When removing dust, always spray windshield washer fluid and avoid dry wiping. 2. Damaged Blades: If there are stubborn or hard contaminants on the glass, clean them manually. These contaminants can easily damage the wiper blades, leading to ineffective wiping and, in severe cases, affecting the wiper motor. 3. Wiper Blades: When lifting the wiper blades during car washing or routine cleaning, hold them by the spine. Gently place them back instead of snapping them into position. 4. Winter Use: In winter, first use an ice scraper to remove ice chips from the windshield to avoid overburdening the wipers. Proper cleaning of the wipers is essential; neglecting this can accelerate wear and tear.
10
2
Share

How many cylinders does the BMW X3 engine have?

The BMW X3 engine is a 4-cylinder. Below is an introduction to the BMW X3 engine and its maintenance. Introduction to the BMW X3 engine: The vehicle uses three engines: a low-power version of the 2.0-liter turbocharged engine, a medium-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. The transmission system is matched with an 8-speed automatic manual transmission, and the xDrive four-wheel-drive system is standard across the entire lineup. BMW X3 engine maintenance: Regularly change the engine oil and oil filter, maintain good crankcase ventilation, periodically clean the fuel system, regularly maintain the radiator, and perform fuel system maintenance and cleaning. The car engine requires regular maintenance. When driving through areas that are particularly humid or have high levels of dust, it is also necessary to inspect and maintain the relevant components of the engine.
1
3
Share

Why is the Peugeot 307 durable?

The durability of the Peugeot 307 is primarily attributed to the high quality of its components and excellent overall performance. Below is a detailed introduction about the Peugeot 307: Overview: The Dongfeng Peugeot 307 largely inherits the common features of the Peugeot series. The overall streamlined design is smooth and harmonious, with the front fenders seamlessly blending into the upper body, the arched roof integrating with the rear triangular windows and spoiler, and the trunk naturally transitioning into the rear spoiler. The exterior design is balanced and symmetrical. Steel Body: The integrated steel body of the Dongfeng Peugeot 307 significantly enhances the vehicle's strength. On one hand, during collisions, specially designed impact-absorbing zones reduce the impact on passengers, improving passenger protection. On the other hand, the integrated body ensures excellent grounding performance, fully guaranteeing driving safety.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.