How to Calculate the 30 Days from Subject 1 to Subject 3?

1 Answers
VonVera
07/29/25 6:50pm
After passing Subject 1, you can schedule Subject 2 in 10-15 days. After passing Subject 2, you can schedule Subject 3 in 10-20 days. Below are the relevant details: 1. Article 41: For applicants of small cars, small automatic transmission cars, or small automatic transmission passenger cars for the disabled, Subject 3 can be scheduled 30 days after obtaining the learning driving permit. 2. Free Retake: Each subject allows one free retake if the initial attempt fails. If the retake also fails, the examination is terminated, and the applicant must reschedule. For Subjects 2 and 3, rescheduling is allowed only after 10 days, with a maximum of 5 attempts. If the 5th attempt still fails, all previously passed subjects will be invalidated, and the applicant must reapply for Subject 1.
Was this review help?
14
2
Share
More Forum Discussions

Is it necessary to complete all theoretical training?

The necessity of completing all theoretical training mainly depends on how the driving school sets the training hours. If the training hours are determined based on theoretical training, then you need to watch a portion of the videos, but generally, it is not required to watch all of them. The review process for the subject one videos takes 3-7 working days. Once approved, you will receive the corresponding training hours. As long as the total training hours meet the requirements, you can schedule the exam. Additional information: 1. Required training hours: According to relevant regulations, the theoretical training hours for subject one must reach 18 hours, with practical training hours at 6 hours; subject two requires 2 hours of theoretical training and 22 hours of practical training; subject three requires 10 hours of theoretical training and 28 hours of practical training, totaling 86 hours. 2. Theoretical training: This refers to training in safety skills and other aspects, and you must complete the required hours before taking the exam. For driver theoretical training, you generally need to bring training materials, follow the instructor's guidance, take notes on key knowledge points and exam requirements, etc. Driving schools usually organize students to take mock exams in electronic classrooms. After passing, you can proceed to the theoretical exam administered by the examination department.
7
3
Share

What Are the Classification Standards for Vehicle Wheelbase Levels?

Vehicle grades are generally divided into six levels: A00, A0, A, B, C, and D. According to the German vehicle classification standards, A-class vehicles refer to small passenger cars; B-class vehicles are mid-range passenger cars; C-class vehicles are high-end passenger cars; and D-class vehicles are luxury passenger cars. The classification is mainly based on parameters such as wheelbase, engine displacement, and weight. The further the letter is in the alphabet, the longer the wheelbase, the larger the displacement and weight, and the higher the level of luxury of the passenger car. Passenger cars are categorized as A00 (micro cars), A0 (subcompact cars), A (compact cars), B (mid-size cars), C (full-size cars), and D (luxury cars). 1. Based on vehicle length: under 3.7M for micro cars (e.g., QQ), 3.7-4.3M for subcompact cars (e.g., 206), 4.3-4.6M for compact cars (e.g., Sagitar), 4.6-4.9M for mid-size cars (e.g., Camry), 4.9-5.1M for full-size cars (e.g., A6L), and over 5.1M for luxury cars (e.g., Mercedes-Benz S-Class). 2. Based on wheelbase: under 2350mm for micro cars, 2350mm-2500mm for subcompact cars, 2500mm-2700mm for compact cars, 2700mm-2800mm for mid-size cars, 2800mm-2900mm for full-size cars, and over 2900mm for large luxury cars.
9
5
Share

Is the fuel tank cap of a Mercedes-Benz on the left or right side?

On the right side. The fuel tank cap switch of a Mercedes-Benz is generally linked to the car door. When the door is opened, the fuel tank cap automatically unlocks, and pressing the fuel tank cap switch will pop it open. Below are specific details on cleaning the fuel tank: Regular Cleaning: A sealed fuel tank can accumulate a lot of gum, sludge, particulate matter, and foil. Many substances in the fuel require regular cleaning to prevent excessive impurities from causing malfunctions. Effects of Long-Term Neglect: Excessive deposits of impurities and water at the bottom of the fuel tank can clog the ventilation pipes and fuel lines, creating negative pressure inside the tank. This leads to poor fuel supply, sluggish throttle response, and reduced vehicle performance. If the fuel level is too low or insufficient at this time, it is essential to refuel immediately—do not wait until the warning light comes on. If the fuel pump continues to operate under these conditions, it may overheat, affecting its lifespan, and in severe cases, could even cause the pump to burn out.
20
4
Share

Which Gears to Use for Climbing Hills?

Climbing hills requires different gears depending on the type of vehicle: 1. For manual transmission vehicles, use 2nd or 3rd gear; 2. For automatic transmission vehicles, use S (Sport), L (Low), or D (Drive) gear. The method to prevent rolling back when starting on a slope is: 1. Shift to neutral, engage the handbrake firmly to ensure the vehicle does not roll back; 2. Press the clutch pedal fully with the left foot, shift to 1st gear, and hold the handbrake with the right hand; 3. Gradually release the clutch to the biting point until the vehicle vibrates and shows a tendency to move forward, then hold the position to prevent stalling. Slowly press the accelerator pedal with the right foot, and when the vehicle starts moving forward, fully release the handbrake with the right hand; 4. Continue pressing the accelerator to climb the hill. Avoid prolonged acceleration at the biting point during startup. Once the vehicle is propelled by the accelerator, it won't roll back. Release the clutch pedal and press the accelerator to start smoothly.
1
3
Share

Can I claim insurance if my car is scratched and the culprit cannot be found?

If the vehicle has purchased the scratch loss insurance, you can file an insurance claim. If not, you cannot claim insurance for scratches. Other insurances do not cover vehicle scratches. In such cases, you can report to the police and let the traffic management department check surveillance footage to resolve the issue. Detailed introduction to vehicle commercial insurance: 1. Vehicle Damage Insurance: Covers losses caused by natural disasters and accidents to the vehicle itself. Recommended for new drivers. 2. Third-Party Liability Insurance: Covers losses caused by the owner to third-party personal injuries or deaths. This is a must-have for both your own and others' protection. 3. No-Deductible Insurance: An additional insurance that transfers the owner's liability to the insurance company, reducing the owner's loss. It is advisable to purchase this if you have both Vehicle Damage Insurance and Third-Party Liability Insurance. 4. Theft and Robbery Insurance: Covers damages caused by vehicle theft, robbery, or hijacking. Recommended for owners without a garage. 5. Passenger Liability Insurance: Covers losses suffered by the driver and passengers due to traffic accidents. Premiums are usually paid per seat. Recommended for new drivers or family vehicles. 6. Spontaneous Combustion Insurance: Covers losses caused by fires due to the vehicle's own electrical or wiring issues. Suitable for older vehicles. 7. Glass Breakage Insurance: Covers the separate breakage of windshield and window glass. Since replacing glass is very expensive, it is recommended for vehicles frequently driven in unsafe areas. 8. Scratch Loss Insurance: Covers losses caused by intentional, malicious, or accidental scratches during driving.
13
4
Share

What is the appropriate tire pressure for Xingrui?

The tire pressure for Xingrui is generally 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The tire pressure of Geely Xingrui is displayed on the dashboard. The method to check the tire pressure monitoring in Geely Xingrui is: switch the dashboard display information by pressing the TRIP button on the steering wheel, select the tire pressure information display by pressing the up and down buttons on the steering wheel, and then click confirm. Generally, a tire pressure exceeding 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; it will cause steering wheel vibration and deviation, reducing driving comfort; it will accelerate the local wear of the central tread pattern, reducing tire lifespan; the vibration of the car body will increase, indirectly affecting the lifespan of other components; it will cause excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body, and increasing the load on the car during driving. Hazards of insufficient tire pressure: The friction coefficient with the road surface will increase, leading to higher fuel consumption; it will cause the steering wheel to feel heavy and prone to deviation, which are factors detrimental to driving safety; it will increase the movement of various parts of the tire, causing abnormal heating due to excessive rolling; it will reduce the function of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; the friction between the tire and the ground will increase exponentially, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. If the vehicle is driven at high speed, it may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, with an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: It usually alarms when the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the previous data, and the tire pressure monitoring indicator light will come on. At this time, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure fault light to come on. For sensor damage issues, only a new replacement part can be used.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.