How to Buy a Used Car Without a Temporary Residence Permit?

1 Answers
DelLeila
07/29/25 4:51pm
Methods for buying a used car without a temporary residence permit are as follows: 1. Obtain the vehicle transfer application form and agreement from the vehicle management office. 2. Fill out the transfer application form and agreement. For company vehicles: a company seal is required, along with proof from both the buyer and seller, a copy of the new owner's business license, and a copy of the small passenger car quota certificate if applicable. 3. Clear any traffic violation records of the vehicle to ensure the traded vehicle is within its annual inspection validity period. Precautions when buying a used car: 1. Check if the patterns on the front and back pages of the vehicle license match when combined, and verify if the license photo and chassis number match the vehicle. 2. Vehicle insurance: confirm that the chassis number and engine number on the insurance policy match those on the vehicle license and check if the policy is still valid. 3. Vehicle registration certificate: inspect if the font on the registration certificate matches that on the vehicle license, and verify if the chassis number and engine number are the same as those on the license. Check if the manufacturing date and registration date (if the gap exceeds six months for a domestic car, it might be a stock vehicle) match the dealer's description, and review the transfer records to see if there have been frequent transfers in a short period.
Was this review help?
17
0
Share
More Forum Discussions

How to Manually Deactivate the Lavida Anti-Theft System?

First, turn on the car and insert the key to ensure the vehicle is in the power-on state. Then wait until the anti-theft light on the dashboard flashes. Observe the dashboard - the car can only be started when the ID of the key chip matches the ID on the engine side. Turn off the car's power. The ignition key contains an electronic chip with a fixed ID. Wait for ten minutes, then turn the power back on. At this point, the anti-theft light will be flashing. Repeat the above operation three times to deactivate the Lavida engine anti-theft system.
15
1
Share

Can You Make a U-Turn at a Circular Signal Light?

At sections without prohibited U-turn signs, you can make a U-turn when the light is green, but you must not hinder the normal passage of other vehicles and pedestrians. Methods for making a U-turn at a circular signal intersection: One-step forward U-turn (using the left or right side of the intersection): To make a U-turn using the right side of the intersection, turn on the right turn signal, slow down, and shift to an appropriate gear. Observe the traffic on the right, turn right, proceed forward appropriately, then turn on the left turn signal before turning left. Observe the traffic ahead and behind, turn left, and complete the one-step forward U-turn after confirming safety. To make a U-turn using the left side of the intersection, turn on the left turn signal, slow down, and shift to a lower gear. Observe the traffic on the left and ahead, as well as behind. Turn appropriately based on the intersection position to complete the one-step forward U-turn. To make a U-turn using the right side of the intersection with reverse gear, turn on the right turn signal, proceed forward through the intersection, and stop. Shift into reverse gear, turn on the left turn signal, and use the interior and exterior rearview mirrors as well as turning your head to observe the traffic ahead and behind. Start moving, turn right, and back the vehicle into the right side of the intersection before stopping. Turn on the left turn signal, observe the traffic on both sides, and safely exit the intersection to complete the U-turn.
14
0
Share

What's the reason for high car water temperature and the fan not spinning?

There are three main reasons for high car temperature and the fan not spinning: 1. Motor damage: If the cooling fan motor of the car is damaged, it naturally won't spin. Replacing the motor can solve the problem. 2. Fuse or relay damage: If the power supply fuse or relay for the fan is damaged, located in the vehicle's engine compartment fuse box, replacing it can resolve the issue. The fuse box cover has position information. 3. Thermostat switch issue: Some faults in the thermostat switch can also affect the operation of the car radiator fan, so it's important to check this as well.
9
2
Share

What Causes a Car Door to Automatically Unlock After Being Locked?

Because the car is equipped with an automatic window lowering function. Or there may be an issue with the car's electrical circuit that requires immediate repair. Below is relevant information about car doors: 1. Design Requirements: Ensure convenient entry and exit for passengers, with the maximum door opening angle controlled at around 65° to 70°. During the opening process, the door should not interfere with other parts. When closed, the door must be securely locked to prevent it from opening while driving. 2. Definition: A car door provides access for the driver and passengers and isolates external disturbances. It also helps mitigate side impacts to some extent, protecting the occupants.
14
0
Share

What does a sports appearance package mean?

A sports appearance package refers to a complete set of components designed to enhance the vehicle's aerodynamic performance, reduce air resistance, and increase visual impact by adding external spoilers and splitters, thereby achieving a more sporty driving experience. The sports appearance package includes components such as body kits, underbody panels, roof racks, and rear spoilers. The body kit (external spoiler for the car body) primarily functions to reduce the reverse airflow generated during driving while increasing the vehicle's downforce, making the car more stable during movement, thereby reducing fuel consumption. It is also the most visually striking accessory that highlights personalization. When selecting a suitable body kit for a car, the following aspects should be considered: Hood: It should be lightweight, strong, and capable of withstanding high temperatures. Ideally, it should also help dissipate heat from the engine. Front lip: The front lip is the most prominent AEROPARTS that highlights the car's exterior personality. Generally, if the shape is not too sharp and has fixed fasteners (straps are not acceptable), it can be installed. However, overly low styles should be avoided, as they may cause inconvenience in daily driving. Front bumper spoiler: When selecting and installing, avoid overly sharp or protruding styles to prevent potential harm to pedestrians. GT-WING: The gap between the main wing and the car body should be less than 2CM. If it exceeds this measurement, the length of the main wing ends should leave a 1.5cm margin from the door panels. Side skirts: After installing the body kit, the minimum ground clearance should not be less than 9CM, and the catalytic converter heat shield should not be lower than 5cm from the ground.
6
5
Share

What does BYD Super Hybrid mean?

BYD Super Hybrid is essentially a plug-in hybrid system, but unlike conventional hybrid systems that are modified from gasoline vehicles, BYD's true intention this time is to create a plug-in hybrid model that primarily relies on electric power. Below is an introduction to the BYD Super Hybrid architecture: 1. Xiaoyun Series Plug-in Hybrid Dedicated Engines: There are two types, a 1.5L naturally aspirated engine and a 1.5Ti turbocharged engine. The 1.5L naturally aspirated engine is not particularly powerful, but its peak thermal efficiency reaches 43%. The 1.5Ti turbocharged engine achieves a balance between thermal efficiency and power, with its peak thermal efficiency also leading the industry at 40%. These two highly efficient engines lay a solid foundation for reducing the vehicle's overall fuel consumption. 2. EHS Hybrid System: It features a dual-motor, dual-electric-control integrated design. The motors are ultra-high-speed flat-wire motors capable of reaching 16,000 rpm, with a peak efficiency of 97.5%. The two motors adopt a series-parallel architecture, offering multiple operating modes to adapt to different road conditions, further optimizing the user experience of this hybrid system. 3. Blade Battery: This is BYD's latest battery technology, utilizing lithium iron phosphate (LFP) battery technology for safety and efficiency. The DM-i model's battery pack capacity ranges from 8.3 to 21.5 kWh, enabling the vehicle to travel 50-120 km in pure electric mode. Additionally, the high-range version offers both AC slow charging and DC fast charging options, making it more convenient for users to recharge quickly.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.