How to Buy a Tesla Without a Fixed Parking Space in the Community?

What Causes the Electric Power Steering Wheel to Become Heavy?

The reasons for the electric power steering wheel becoming heavy are as follows: 1. Decreased lubrication effect of bearings: If the fit between the rolling bearings and sliding bearings connected to the steering system is too tight, it can lead to reduced lubrication effect of the bearings, causing a sticking phenomenon, which manifests as a heavy steering wheel; 2. Pump pressure not meeting standard values: When the pump pressure of the power steering pump does not meet standard values, the steering wheel will feel heavy during use. Check the flow control valve; during driving, leaks in the flow control valve or safety valve can be repaired by grinding. Then, check if the spring of the safety valve has failed; 3. Low hydraulic pressure of the steering gear: When the hydraulic pressure of the steering gear is low, the steering wheel will also feel heavy. If the steering wheel becomes heavy due to the hydraulic pressure of the steering gear, it is necessary to promptly visit a repair shop for maintenance; 4. Air in the steering system: When there is air mixed in the car's steering system, not only will the steering feel heavy, but there will also be noise during the steering process. It needs to be addressed promptly to avoid unnecessary losses later; 5. Dirty oil filter: Long-term lack of maintenance or untimely replacement of the return oil filter in the oil reservoir can easily cause blockage, leading to poor circulation of the power steering oil and making the steering wheel heavy.

16

1

Share

What are the symptoms of insufficient clutch fluid?

Symptoms of insufficient clutch fluid include: the clutch pedal feels soft, and the clutch fails to operate properly. The specific details are as follows: 1. Open the car engine compartment cover to check the fluid level in the clutch reservoir. If the fluid is low, inspect along the oil pipe to identify any leaks and determine the cause of the reduced fluid level. If there are no obvious leaks, check whether the gap between the release bearing and the release lever is too large, causing excessive displacement of the working cylinder piston and rubber cup, which increases the required fluid volume. 2. If there is no lack of fluid, the main reason may be wear between the piston and cylinder of the hydraulic control master cylinder, resulting in excessive clearance and deformation during piston movement; or damage or deformation of the master cylinder rubber cup, reducing sealing performance, which causes the compressed fluid to flow back behind the rubber cup and piston, leading to insufficient actual fluid supply.

2

5

Share

What Does the First Car Maintenance Include?

New cars generally undergo their first maintenance after driving 3,000-5,000 kilometers or 3-5 months, as specified in the official maintenance manual or as advised by the 4S dealership. During the first maintenance at a 4S dealership, the specific maintenance items include changing the engine oil, oil filter, and air filter. Additionally, a comprehensive inspection and diagnosis of the vehicle's condition and usage will be conducted. Below are the relevant details: 1. Other items included in the first maintenance: (1) Check the engine's working condition, such as whether the pipe connections are normal, if there are any leakage points, if the engine sounds normal, or if there are any abnormal noises; (2) Check if the coolant level is within the normal range; (3) Inspect the wear level of the brake pads and tires, as well as the tire pressure condition; (4) Check for any scratches or corrosion on the chassis components; (5) Inspect the remaining amount of power steering fluid and whether there are any oil leaks at the oil pipe connections; (6) A thorough cleaning of the vehicle, including the engine compartment, body, and interior. 2. Notes for the first maintenance: Due to the increasing number of vehicles nowadays, many 4S dealership service centers are often overwhelmed. Therefore, it is recommended to make an appointment in advance if you need to schedule your first maintenance. When going to a 4S dealership for the first maintenance, remember to bring the first maintenance voucher. After the first maintenance, regular upkeep is also essential, including periodic oil changes, replacement of various filters, checking tire conditions, and monitoring brake pad wear. These maintenance practices greatly contribute to extending the vehicle's lifespan and ensuring safety.

3

Share

What does D/S gear mean?

D gear, in a car, means the drive gear and is the most commonly used gear while driving. Since the advent of automatic transmission models, the D gear has existed. S gear is actually the abbreviation of the English word "SPORT," meaning sport, and it is the sport mode of the D gear. Many car models have added the S mode to enhance the vehicle's sportiness and playability. Below are the relevant introductions: 1. D gear: For the vehicle, the D gear is also the most economical gear. In D gear, the throttle and engine response are relatively gentle, and the gear shifts are more comfortable. All settings of the D gear are focused on fuel efficiency and comfort. 2. S gear: Both S gear and D gear are forward gears, but in S gear, the engine's power output becomes more aggressive. At the same time, the throttle becomes more sensitive, and the transmission delays shifting. The RPM increases, acceleration becomes faster, and the vehicle's power performance is further enhanced. Compared to D gear, S gear is more suitable for car owners who pursue driving pleasure. 3. When to use S gear: S gear is generally used for overtaking or climbing slopes, and it can also be used during the acceleration phase when entering the highway to help speed up. Of course, many car owners who want to experience an intense driving style in daily life can also engage S gear to feel the surging power output.

7

3

Share

How to Choose Engine Oil Viscosity?

Factors for choosing engine oil viscosity: 1. Based on vehicle series: Japanese/Korean and American cars: Generally choose 30 viscosity oil (0W-30/5W-30, etc.); German cars: Recommended to use 40 viscosity oil (0W-40/5W-40, etc.). 2. Based on load conditions: If the vehicle operates under high load and low RPM conditions, it's generally advisable to use lubricating oil with higher viscosity. For light load and high RPM conditions, lubricating oil with lower viscosity is usually preferred. 3. Based on engine wear condition: Depending on the vehicle's wear status, older vehicles with over 100,000 kilometers typically need to adjust oil viscosity compared to new cars. Due to increased component gaps caused by wear, higher viscosity oil is required to form a good protective oil film. If the engine has undergone major repairs, it's also necessary to increase the viscosity of the lubricating oil used. 4. Based on local real-time temperature: In northern winters, it's advisable to choose oil with better low-temperature fluidity, such as 0W/5W oil, to ensure normal cold starts for your vehicle.

2

5

Share

Should You Shift to N or P Gear at a Red Light?

Shifting to N gear at a red light and applying the handbrake can be relatively more fuel-efficient. This is because the passive wheel in the torque converter of the transmission is idling in this state, which does not increase the resistance of the active wheel connected to the engine. Without additional load, fuel consumption naturally does not increase. Relevant details are as follows: 1. It is not recommended to shift to P gear while waiting at a red light because when the vehicle is parked in P gear, a hook in the transmission locks onto the gear, creating mutual force between them. Over time, this can exacerbate wear and tear on the transmission. 2. Avoid common misconceptions when using automatic transmission vehicles: Do not keep the car in D gear for prolonged periods while parked. In traffic jams, some drivers of vehicles with automatic transmissions often only press the brake pedal while keeping the gear lever in D (drive gear) without shifting. If the stop is brief, this is acceptable. However, for longer stops, it is best to shift to N gear and engage the parking brake firmly.

10

2

Share

How to Buy a Tesla Without a Fixed Parking Space in the Community?

What Causes the Electric Power Steering Wheel to Become Heavy?

What are the symptoms of insufficient clutch fluid?

What Does the First Car Maintenance Include?

What does D/S gear mean?

How to Choose Engine Oil Viscosity?

Should You Shift to N or P Gear at a Red Light?

How to resolve the SVS light issue in diesel vehicles?

What does AUTO mean on a car's air conditioning system?

What does the yellow light on Mazda i-stop mean?

How Long Does It Take to Apply a Full Car Wrap?