···
Log in / Register

How to Avoid Mistaking the Accelerator for the Brake?

1 Answers
McMason
07/28/25 4:14pm

Avoiding mistaking the accelerator for the brake can be achieved through the following methods: 1. Follow the 'single-pedal' driving logic. 2. Develop good driving habits. 3. The same principle applies when reversing. The function of the brake is to reduce speed or bring the vehicle to a stop. Its working principle involves converting the kinetic energy of the moving vehicle into heat energy through friction between the brake pads and brake drum, as well as between the tires and the ground, thereby slowing down or stopping the vehicle. Reasons for brake failure include: 1. Impurities in the brake master cylinder or poor sealing. 2. Failure of the vacuum booster pump. 3. Contaminated brake fluid. 4. Leakage in the brake master cylinder or wheel cylinder. 5. Air leakage from the air reservoir or pipeline connections. 6. Severe overloading. 7. Carbonization of the brake drum. 8. Insufficient brake fluid in the brake master cylinder. 9. Wear of the brake master cylinder piston.

Was this review help?
17
2
Share
More Forum Discussions

What are the differences between position lights and daytime running lights?

The differences between position lights and daytime running lights: 1. Tail lights are different: Position lights have both rear tail lights and front position lights; Daytime running lights do not have rear tail lights. 2. Usage environments are different: Position lights are turned on in low visibility environments, such as in foggy weather, dusk, evening, dawn, haze, rainy days, and nighttime; Daytime running lights are turned on during the day. 3. The way to turn them on is different: Position lights have a separate switch; Daytime running lights automatically turn on when the position is 0, without a separate switch. Position lights, also known as clearance lights, refer to the lights installed at the highest points at the front and rear of the vehicle, somewhat similar to the anti-collision lights installed at the wingtips of an airplane. Daytime running lights refer to the lights installed on both sides of the front of the vehicle, used to alert vehicles and pedestrians ahead during the day. Daytime running lights are not lighting lamps but signal lights that indicate the position of the vehicle.
14
3
Share

Where is the Nissan Sunny's Cabin Air Filter Located?

Nissan Sunny's cabin air filter is installed above the left foot position of the front passenger seat. The white cover on the right side is the cabin air filter cover. Opening this cover will reveal the cabin air filter. Functions of the cabin air filter: 1. Ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin; 2. Separates solid impurities such as dust, pollen, and grinding particles from the air; 3. Adsorbs moisture, soot, ozone, and odors from the air. In terms of exterior design, the new Nissan Sunny inherits the family-oriented design approach of the Nissan family, featuring a rounded and full front end; the body lines are smooth, giving the car a practical and moderately styled appearance without strong individuality. As for the interior, the Nissan Sunny's cabin is relatively simple, adopting a gray and white color scheme, creating an overall fresh and elegant feel.
20
4
Share

How to Adjust Rearview Mirrors Properly for Driving?

Method for adjusting rearview mirrors when driving: The standard for left and right rearview mirrors is to position the distant horizon in the middle of the mirror, with the car body occupying one-fourth of the mirror. The standard for the interior rearview mirror is to place the distant horizon in the middle of the mirror, allowing the driver to see their right ear. When the body of the following car has entered the danger zone to the left of the dotted line in the rearview mirror, it indicates that the following car is very close, almost within 5 meters, and turning should not be attempted at this time. When the left side of the following car is close to the boundary between the safe zone and the danger zone, extra caution is advised, but signaling and turning are still safe. If the following car is in the safe zone, positioned in the center of the rearview mirror, it means the distance between the following car and the driver's car is about 15 to 20 meters, and normal turning maneuvers can be performed. If the following car is in the safe zone, positioned to the right of the center in the rearview mirror, it indicates a greater distance between the following car and the driver's car, allowing normal turning operations.
1
0
Share

How to Lift Up the Wiper of Sylphy?

Sylphy wiper lifting steps: 1. Insert the key and power on without starting the engine; 2. Press the ACC switch; 3. Quickly push the wiper switch upward twice, and the wiper will automatically move to the middle of the windshield, allowing you to lift it up from the middle position. The engine model of Sylphy is HR16, which includes 1.6 and 1.8-liter CVVT engines. The HR16DE engine adopts multi-valve continuous variable CVTC technology, and the engine body is made using aviation lightweight aluminum alloy manufacturing technology, making the engine itself lightweight, durable, and excellent in heat dissipation. On the HR16DE engine, some racing engine design and manufacturing technologies are applied, and its power output is as high as 80KW.
3
3
Share

How to open the fuel tank of the Sylphy?

Sylphy's fuel tank opening method: The fuel tank cover release button is located inside the cockpit, below the steering wheel. There are two buttons, one of which is the fuel tank cover release button, positioned on the far left. The Sylphy is a mid-size family sedan, a series introduced by Dongfeng Nissan Passenger Vehicle Company. In terms of body dimensions, the Sylphy measures 4641mm in length, 1815mm in width, and 1450mm in height. Beyond significant enhancements to the body structure, the Sylphy also features Nissan's exclusive IDM Intelligent Driving Dynamics system. In terms of configuration, the Sylphy is equipped with an intelligent active safety system and three major driving assistance technologies.
10
1
Share

Where to Add Windshield Washer Fluid in Nissan Sylphy?

Nissan Sylphy's windshield washer fluid should be added to the reservoir located at the lower left corner of the engine compartment, with a cap marked with a washer symbol. Windshield washer fluid is a consumable item in vehicle use. High-quality automotive windshield washer fluid is primarily composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. The Nissan Sylphy is a compact car under Dongfeng Nissan, measuring 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. It features a 4-door, 5-seat sedan body structure. The Nissan Sylphy is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 90 kW and a maximum torque of 155 Nm, with a top speed of 188 km/h. It comes with MacPherson strut front suspension and a torsion beam rear suspension.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.