How to Avoid Crossing the Line While Driving: Where to Look?

1 Answers
DeJeremiah
07/30/25 2:11am
Move the vehicle body towards the right side in advance and prepare to align with the right boundary line of the right-angle project. If you try to move right after entering the project area, it will be too late. Approximately two meters before entering the project area is the satellite positioning card-reading zone. A prompt sound "Right-angle turn" will be announced inside the vehicle, indicating the system's evaluation of the right-angle project status. After entering the project area, visually ensure that the right one-third of the vehicle's front covers the right edge line of the right-angle project, maintaining a distance of about 30 centimeters between the vehicle body and the right boundary. Crossing the right boundary line will result in a 100-point deduction. If the distance is too wide, the reference point may become inaccurate, potentially leading to cutting the corner or crossing the line.
Was this review help?
14
0
Share
More Forum Discussions

Will points be deducted for rolling back in Subject 3?

Rolling back in Subject 3 will result in point deductions. If the vehicle rolls back less than 30 centimeters, 10 points will be deducted. Rolling back more than 30 centimeters will result in failing the test. Below is some information about Subject 3: 1. Subject 3 is part of the motor vehicle driver's license examination, officially known as the Road Driving Skills and Safe & Civilized Driving Knowledge Test. 2. The road driving skills test generally includes: preparation before starting, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over to the side, driving straight through intersections, turning at intersections, meeting other vehicles, overtaking, making U-turns, and nighttime driving. The test content varies depending on the type of vehicle being licensed for.
14
4
Share

What are the precautions during the probationary period of a driver's license?

During the probationary period of a driver's license, there are mainly the following precautions: 1. Drivers operating motor vehicles during the probationary period should affix or display a uniform-style probationary sign at the rear of the vehicle. 2. When driving on highways during the probationary period, the driver must be accompanied by someone who has held a driver's license for the same or a higher vehicle category for more than three years. 3. During the probationary period, drivers are prohibited from operating buses, commercial passenger vehicles, police cars, fire trucks, ambulances, engineering rescue vehicles, or vehicles carrying explosives, flammable and explosive chemicals, highly toxic substances, radioactive materials, or other hazardous items.
20
5
Share

What is the examination process for a B2 driver's license?

The examination process for a B2 driver's license is as follows: 1. Basic test items: pole test, hill start and stop, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, speed-limited passing through narrow gates, continuous obstacle crossing, 100-meter gear shifting, and bumpy road driving. 2. For large buses, tractors, city buses, medium-sized buses, and large trucks, the test items must not be fewer than 6. 3. For small cars, small automatic transmission cars, low-speed trucks, ordinary three-wheeled motorcycles, and ordinary two-wheeled motorcycles, the test items must not be fewer than 4.
5
2
Share

To what extent can a vehicle be considered for scrapping after a collision?

Vehicles can be scrapped when they are severely damaged or no longer have repair value. The following methods are introduced to determine whether a car has repair value: 1. If the repair cost after an accident exceeds 80% of the vehicle's value before the accident, it can be scrapped. 2. Vehicles that are severely damaged or in poor technical condition and cannot be repaired can also be scrapped. 3. The assessment of the extent of damage and whether the vehicle should be scrapped must be conducted by specialized appraisal agencies. Generally, this can be handled by the traffic police department for appraisal or follow the instructions of the vehicle management office and the designated scrapping assessment points for inspection and damage assessment.
3
0
Share

How Often Should Spark Plugs Be Replaced in a Car?

Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. The following standards can be referenced for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its condition based on the following appearance colors. A normal spark plug will have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug will have a reddish-brown insulator skirt, an electrode gap between 0.8-0.9mm, and no signs of electrode burn. If the spark plug has oil stains or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, showing signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified and the issue resolved before replacing the spark plug. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected or the air-fuel mixture is too rich, or there is oil leakage.
18
0
Share

Is It Illegal to Convert a Manual Transmission to Automatic?

From a legal perspective, converting a manual transmission to an automatic one is not illegal, but modifications should be approached with caution as they may affect annual vehicle inspections. Below is additional information regarding manual to automatic transmission conversion: 1. A manual transmission can be converted to an automatic one by installing an electronic control system that assists the driver in operating the clutch, but gear shifting still requires manual operation. 2. When shifting gears, the system controls a motor to automatically depress the clutch, releasing it once the gear is engaged to prevent stalling, and provides prompts when shifting is needed. 3. However, the jerky sensation during gear shifts may still be quite pronounced, clutch wear is increased, and reliability cannot be guaranteed, so modifications should be undertaken carefully.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.