How to Avoid Crossing the Line in a Right-Angle Turn?

What to Pay Attention to Before Changing Engine Oil

When changing the engine oil of a car, it is important to pay attention to the draining time, which indicates the thoroughness of the oil change. The lubrication system of a four-stroke internal combustion engine is very complex. During operation, the oil pump draws oil from the crankcase oil pan and delivers it through intricate pipelines to achieve pressure lubrication and spray (splash) lubrication at various parts of the engine. Depending on the structure, some car engines have separate lubrication systems for the transmission and clutch. The oil temperature in the crankcase typically ranges between 75°C and 91°C. Key Point 1: After a period of normal operation, the amount of oil stored in the oil pan will always decrease to some extent. Even after the engine is turned off, some oil remains in the oil passages, and this oil slowly flows back into the crankcase (oil storage tank) under gravity. Therefore, when changing the oil, it is necessary to wait for a longer period; otherwise, the oil cannot be completely drained by gravity. Key Point 2: If too much used oil remains Mixing this oil with the newly added lubricant will significantly shorten the service life of the oil. Oil filter replacement cycle: It is recommended to replace the oil filter every 5,000 to 10,000 kilometers to ensure the cleanliness of the oil passages. The engine is equipped with an oil filter in the lubrication system. Many car repair shops, to save time, will lift the car and start draining the oil immediately, then tighten the drain plug and replace the filter, which increases the amount of residual oil. Gravity oil changes are inherently not very thorough, so attention to detail is always necessary during the oil change process.

6

2

Share

How to Determine the Left or Right Position of the Car Fuel Tank Opening?

You can determine it by observing an indicator light on the dashboard. The fuel gauge area on the car dashboard will have an arrow indicating the position of the fuel filler opening. An arrow pointing to the right means the fuel filler opening is on the right side of the vehicle, and vice versa. Here is additional information: 1. The position of the fuel tank opening varies for each car. Most German cars, such as Volkswagen, Audi, and BMW, have the fuel tank opening on the right side, while many Japanese cars, like Honda and Toyota, have it on the left. 2. The position of the fuel filler opening is designed to balance the car's stability and safety based on the vehicle's center of gravity.

16

0

Share

Is MRV a Carbon Emission Standard?

No, MRV refers to the process of quantifying carbon emissions and ensuring data quality, which includes Monitoring, Reporting, and Verification (Verification). Additional information: 1. Automobile carbon emission formula: The carbon dioxide emissions from driving (KG) = liters of fuel consumed × 2.7. For a 1.6L sedan traveling approximately 10,000 kilometers a year, with a gasoline consumption of 1,000 liters, the annual carbon emissions would be about 2.7 tons. 2. Carbon emissions for vehicles with different fuel consumption: A 4.0L sedan, traveling the same 10,000 kilometers a year with a fuel consumption of about 20 liters per 100 kilometers, would have annual carbon emissions of 5.4 tons, which is twice that of a 1.6L sedan.

12

2

Share

Is it okay to occasionally use 92 octane gasoline?

Using 92 octane gasoline occasionally in a car that normally requires 95 or 98 octane won't cause significant issues. However, prolonged use of the wrong fuel can lead to insufficient anti-knock performance, increased engine failure rates, higher fuel consumption, more carbon deposits, and clogged fuel injectors. Reason Analysis: Generally, you should use the fuel grade specified on the fuel filler cap of your vehicle or a higher grade, but it's not recommended to use a lower grade. For example, a car designed for 92 octane can use 95 octane, but a car designed for 95 octane should not use 92 octane. The main difference between various gasoline grades lies in their anti-knock performance, which is a crucial indicator of fuel quality. 92 octane gasoline has an octane rating of 92 and is suitable for mid-range vehicles (with lower compression ratios). 95 octane gasoline consists of 95% isooctane and 5% n-heptane and should be used in engines with higher compression ratios. 98 octane gasoline has an octane rating equivalent to a mixture of 98% isooctane and 2% n-heptane. Its advantages are "two highs and two lows": higher anti-knock performance and power output, along with lower harmful substances and exhaust emissions. Long-term Effects of Using the Wrong Gasoline Grade: Using a higher octane fuel in a vehicle designed for lower octane won't cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency. Conversely, using lower octane fuel in a high-octane vehicle can cause engine knocking, increased resistance during the power stroke, abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

4

Share

How about the MT manual transmission?

MT manual transmission has a simple structure, reliable performance, relatively low manufacturing and maintenance costs, and high transmission efficiency. Additionally, due to its purely mechanical control, it offers quick shift response and can more directly reflect the driver's intentions. Extended information: 1. Principle of manual transmission: Manual transmission, also known as mechanical transmission, requires manually shifting the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The physical characteristics of the engine determine the necessity of the transmission. First, any engine has its peak RPM. Second, the engine's maximum power and maximum torque occur within a certain RPM range. 2. Operation of manual transmission: By coordinating with the clutch, the manual transmission operates the gear lever to drive the shift fork, changing the gear meshing position inside the transmission to alter the gear ratio and achieve speed change. The switching of gears is entirely controlled by the driver, without interference from electronic components, representing the most direct human-machine interaction.

4

5

Share

What is the reason why the car's hazard lights keep flashing and cannot be turned off?

Hazard lights cannot be turned off, most likely because there is a problem with the control box or an abnormal issue with the wiring. The following are common scenarios for using hazard lights: 1. Driving in foggy weather: Due to poor visibility in foggy conditions, not only should the hazard lights be turned on, but also the fog lights to alert passing vehicles and provide illumination for yourself. 2. Vehicle breakdown or traffic accident: When a vehicle breaks down or is involved in a traffic accident on the road, the hazard lights should be turned on to alert passing vehicles to safety. On highways, if a vehicle breaks down or is parked after an accident, failure to use lights and set up warning signs as required will result in a 12-point penalty.

8

3

Share

How to Avoid Crossing the Line in a Right-Angle Turn?

What to Pay Attention to Before Changing Engine Oil

How to Determine the Left or Right Position of the Car Fuel Tank Opening?

Is MRV a Carbon Emission Standard?

Is it okay to occasionally use 92 octane gasoline?

How about the MT manual transmission?

What is the reason why the car's hazard lights keep flashing and cannot be turned off?

Is it necessary to replace the coolant?

What does the AUTO display on the air conditioner mean?

How to replace the headlight bulb on a Lavida?

Does Sleeping in the Car with the AC On Affect the Vehicle?