How to Avoid Crossing the Line During Curve Driving?

Where is the engine of GAC Trumpchi GM6 from?

GAC Trumpchi GM6's engine is independently developed by Trumpchi, a domestic engine. The GAC Trumpchi GM6 is a 5-door, 7-seater MPV with body dimensions of: length 4780mm, width 1837mm, height 1730mm, and a wheelbase of 2810mm. The GAC Trumpchi GM6 is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 124 kilowatts at 5000 rpm, and a maximum torque of 265 Nm between 1700 to 4000 rpm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension employing a torsion beam non-independent suspension.

10

0

Share

What is the standard tire pressure for the Elantra?

The normal tire pressure for the Hyundai Elantra is between 2.4 and 2.5 bar, with slight variations depending on specific conditions. Locations to find standard tire pressure information: The standard tire pressure (also known as recommended tire pressure) can typically be found in the vehicle's user manual, on a label near the driver's side door (B-pillar area), in the drawer next to the driver's seat, on the fuel tank door, near the door pillar or fuel cap for sedans, or on the side of the front passenger door. Effects of insufficient tire pressure: Severely low tire pressure (below 1.5 bar) can cause the tire to repeatedly flex during driving, leading to excessive heat buildup in the sidewall and increasing the risk of a tire blowout.

11

0

Share

What does Jiaji Light Hybrid mean?

Jiaji Light Hybrid system refers to the installation of a BSG mild hybrid power system on the original vehicle. The 48V battery it is equipped with is automatically collected by the vehicle's energy recovery system and does not require charging. Here are the relevant details: Taking the 2021 Jiaji as an example, its body dimensions are: length 4706mm, width 1909mm, height 1690mm, wheelbase 2805mm, minimum ground clearance 165mm, fuel tank capacity 52L, and curb weight 1520kg. Suspension and power: The 2021 Jiaji features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 177PS, maximum power of 130kW, maximum torque of 255Nm, paired with a 6-speed manual transmission.

19

0

Share

How to Use the Auto Start-Stop Feature in Cars?

Using the auto start-stop feature in cars involves the following steps: 1. When encountering a red light or needing to stop for other reasons, the engine automatically shuts off after braking; 2. To start moving again, simply release the brake, press the accelerator, or gently turn the steering wheel, and the engine will restart. The auto start-stop system is designed to automatically shut off the engine when the vehicle comes to a temporary stop during driving and restart it when it's time to move forward. The auto start-stop function button is labeled 'AOFF'. Its working principle is: when the brake is applied and the gear is disengaged, the system automatically detects that the engine is idling and not in gear, the speed sensor shows zero, and the battery sensor indicates sufficient energy, prompting the engine to stop automatically. Pressing the clutch, releasing the brake, or turning the steering wheel will quickly restart the engine.

20

1

Share

What letter represents the forward gear in an automatic transmission?

In automatic transmission vehicles, the forward gear is represented by the letter D. Below is a detailed introduction to the gears of an automatic transmission car: 1. R gear (Reverse gear): When this gear is engaged, the hydraulic system's reverse gear circuit is activated, causing the drive wheels to rotate in reverse for backward movement. The vehicle must be completely stopped before shifting to the "R" gear to avoid damaging the transmission. 2. N gear (Neutral gear): When neutral is engaged, the planetary gear system idles without power output. 3. D gear (Drive gear): When the gear selector is in this position, the hydraulic control system automatically connects the corresponding forward gear circuit based on throttle opening and vehicle speed signals. It can automatically shift up or down according to driving speed, achieving automatic transmission functionality. 4. P gear (Parking gear): This uses a mechanical device to lock the rotating parts of the vehicle's wheels, preventing the car from moving.

7

2

Share

Can a Faulty ABS Pump Cause Brake Pressure Loss?

abs pump failure can cause brake pressure loss. The function of the ABS pump and the working principle of the ABS system are introduced as follows: Function of the ABS pump: The function of the ABS pump is to prevent wheel lock-up. In most vehicles, it starts working at speeds above 18 km/h. The ABS pump receives signals from ABS sensors on each wheel, which are then sent to the ABS control module. The ABS control module then commands the ABS pump to operate, rapidly pumping and releasing brake fluid to achieve anti-lock braking. Working principle of the ABS system: The ABS system operates in two modes: mechanical and electronic. It not only enables vehicle braking but also prevents wheel lock-up during braking, allowing the vehicle to maintain steering and mobility while braking. This system can reduce braking distance, minimize hydroplaning, enhance vehicle stability, decrease tire wear, and extend tire lifespan.

13

5

Share

How to Avoid Crossing the Line During Curve Driving?

Where is the engine of GAC Trumpchi GM6 from?

What is the standard tire pressure for the Elantra?

What does Jiaji Light Hybrid mean?

How to Use the Auto Start-Stop Feature in Cars?

What letter represents the forward gear in an automatic transmission?

Can a Faulty ABS Pump Cause Brake Pressure Loss?

How to Remove the Interior Trim Panel of the Middle Door on a Changan Honor

What are the steps for changing a tire?

What is the function of the drivetrain?

Can a car start without engine oil?