How to Automatically Turn Off the Lights When the Bora Stalls?

1 Answers
LaCamille
07/29/25 9:10pm
The Bora's automatic headlight sensor switch is located on the lighting control assembly on the left side of the center console. Rotate the knob to AUTO to enable or disable the automatic headlight function. Below is an introduction to car headlights: Car headlight sensor devices: Automatic headlights are controlled by light sensors installed on the vehicle body. The car's light sensor is typically positioned at the front of the center console, near the windshield. Some models place it in front of the rearview mirror, close to the windshield. Higher-end models may also integrate an automatic rain sensor in this location. Car headlight configurations: Headlight configurations vary widely. Some models feature headlights with functions like adaptive cornering and height adjustment. Adaptive cornering allows the headlights to pivot based on the steering wheel's turning angle, reducing blind spots during turns. Headlight height adjustment involves sensors installed on the rear suspension, which automatically adjust the headlight height by detecting changes in the vehicle's rear height.
Was this review help?
16
3
Share
More Forum Discussions

How to Clean Tar Stains from a Car?

There are two methods to clean tar stains from a car: 1. Car Wax: The oil content in the wax can dissolve the tar in the asphalt. By repeatedly applying car wax, the asphalt stuck on the car body can usually be removed. After wiping off the asphalt, use a clean cloth to wipe once more to completely remove any tar residue left on the car body. 2. Tar Remover: This cleaning agent can quickly dissolve and remove tar, asphalt, and other dirt from the car surface, offering significant cleaning, stain removal, and polishing effects. However, this cleaner is somewhat corrosive, so it must be thoroughly washed off after application.
9
4
Share

Does a Scratched Patch on a Car Tire Have Any Impact?

A small scratch on the sidewall of a tire will not affect the structural integrity of the tire, and it can continue to be used. However, if the damaged area is large or the depth is significant, it may compromise the integrity of the rubber and the internal steel wire mesh layer. Continuing to drive under such conditions could lead to bulging and increase the risk of a blowout, necessitating immediate replacement. Scenarios requiring tire replacement: First, check if the tire is deformed. If the tire has deformed, it indicates structural changes in the tire body, primarily due to significant external forces that have damaged the internal structure, making replacement essential. Severe damage to the tread also calls for replacement. If the tire is accidentally cut by a hard or sharp object, assess the severity of the damage. If the tread pattern is severely worn or the tread is punctured with a hole exceeding 6mm in diameter, it should be replaced outright instead of being repaired. Tires are one of the critical components of a vehicle, serving several functions: supporting the entire weight of the vehicle and bearing its load; transmitting traction and braking torque to ensure adhesion between the wheels and the road; mitigating and absorbing vibrations and impacts during driving to prevent excessive shaking and premature damage to vehicle components, thereby ensuring driving safety, handling stability, comfort, and fuel efficiency.
19
2
Share

Does running a red light at an intersection capture the front or the rear of the vehicle?

Running a red light at an intersection typically captures the rear of the vehicle. Electronic cameras take three photos to determine the violation: a photo of the vehicle crossing the stop line at the intersection, showing the red light and license plate number; a photo of the vehicle completely crossing the stop line, showing the red light and license plate number; and a photo of the vehicle continuing to move, comparing the vehicle's position change, showing the red light and license plate number. Capturing these three photos confirms the vehicle ran a red light. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. Running a red light is a traffic violation where a vehicle passes through an intersection when the light is red. To avoid running a red light, consider the following: Check the arrow light first, then the circular light: Currently, there are two types of traffic signals: arrow traffic lights and circular traffic lights. If an arrow light is present, check it first before looking at the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow is red, right turns are prohibited, and violations will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, but the rear wheels follow, the electronic camera will capture it, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed; wait for the green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, use it to judge. If there is no countdown and the vehicle is close to the intersection with high speed, proceed to avoid running a red light due to late braking. If the vehicle is slow and far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to pass, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from passing. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians should follow the motor vehicle signal. When the red light is on, right-turning vehicles may pass if they do not obstruct other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Extreme weather: If visibility is so low that even electronic police cannot clearly see the traffic light, resulting in blurred evidence, no penalty will be imposed for mistakenly running a red light. Emergency situations: When rushing a critically ill patient to the hospital, running multiple red lights may occur. After delivering the patient, provide hospital or patient proof to the traffic police for verification. If confirmed, the violations will be cleared. If possible, call an ambulance to avoid accidents caused by running red lights. Police direction: During peak hours, traffic police may direct traffic at key intersections. Drivers should follow the officer's hand signals. Yielding to emergency vehicles: Yield to ambulances, fire trucks, and other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the red light violation. Even if recorded, you can apply for reconsideration with the traffic police.
11
3
Share

What Other Compensations Should Be Claimed After the Car Is Repaired When the Other Party Is Fully at Fault?

The party at fault shall bear the losses of the victim according to the accident liability determined by the traffic police. Compensation items for traffic accidents: If the victim is injured but not disabled, compensation includes medical expenses, lost wages, nursing fees, transportation costs, accommodation expenses, hospitalization meal subsidies, necessary nutrition fees, etc. If the victim is disabled due to the injury, compensation includes medical expenses, lost wages, nursing fees, transportation costs, accommodation expenses, hospitalization meal subsidies, necessary nutrition fees, disability compensation, disability aid appliance costs, dependent support, mental distress compensation, as well as necessary rehabilitation and nursing fees, follow-up treatment fees, etc., incurred during recovery and continued treatment. Legal basis: Article 17 of the "Interpretation of the Supreme People's Court on Several Issues Concerning the Application of Law in the Trial of Personal Injury Compensation Cases" stipulates that if a victim suffers personal injury, the party liable for compensation shall compensate for various expenses incurred during medical treatment and the reduced income due to lost work, including medical expenses, lost wages, nursing fees, transportation costs, accommodation expenses, hospitalization meal subsidies, and necessary nutrition fees. If the victim dies, in addition to compensating for the relevant expenses specified in the first paragraph of this article based on the rescue and treatment situation, the party liable for compensation shall also compensate for funeral expenses, dependent support, death compensation, and other reasonable expenses such as transportation costs, accommodation expenses, and lost wages incurred by the victim's relatives for funeral arrangements.
16
5
Share

How long is the Fit?

The Fit is a compact car under Honda, with dimensions of 4109mm in length, 1694mm in width, and 1537mm in height, and a wheelbase of 2530mm. This is a hatchback model, and all variants are equipped with a 1.5L naturally aspirated Earth Dreams engine. The differences between hatchbacks and sedans are as follows: 1. The hatchback has a flat rear trunk appearance, while the sedan has a protruding rear trunk appearance; 2. The hatchback combines the cabin and trunk into one compartment, whereas the sedan consists of three separate compartments with distinct purposes; 3. Sedans generally require more engine horsepower; 4. Hatchbacks are more suitable for cargo transport, while sedans focus more on passenger comfort.
7
0
Share

How to Operate an Automatic Transmission Car When Parking?

Correct parking method for automatic transmission cars is as follows: 1. When the car stops, first decelerate, press the brake, and shift into N gear. The reason for not directly shifting to P gear before turning off the engine is to avoid the transmission passing through R gear while the engine is running, thereby reducing an extra impact. 2. Turn off the engine. At this point, the power won't be cut off because P gear hasn't been engaged, and the key cannot be removed. 3. Pull up the handbrake and release the foot brake. You can feel the force has been applied to the handbrake. After the car is completely stationary, shift to P gear to prevent the force from acting on the P gear. 4. Cut off the power and remove the key. The parking process is now complete.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.