How to automatically retract the side mirrors when locking a Land Cruiser Prado?

2 Answers
MacNaomi
09/08/25 4:57am
First, locate the side mirror adjustment button area on the left side of the center console in your Toyota Land Cruiser Prado. Press the button in the upper right corner of the mirror adjustment area to control the power folding of the mirrors. Pressing the "L" button on the mirror adjustment selects the left mirror for adjustment. Pressing the "R" button on the mirror selection switch chooses the right mirror for adjustment. Finally, press the directional buttons for the vehicle mirrors to adjust their orientation in different directions.
Was this review help?
20
4
Share
EvelynLynn
09/20/25 3:37am
Actually, I know a bit about cars. For models like the Prado, setting the auto-folding mirrors is quite simple. Just press and hold the lock button on the key fob while sitting in the car until you hear a beep or see the mirrors start folding—that means it's set. Some higher-trim models even have an exterior mirror option in the vehicle settings on the infotainment screen; just check the auto-fold box. Normally, the mirrors will fold automatically when locking the car, mainly to prevent scratches or thieves from snapping them off. I’ve had battery issues a few times—if the setting doesn’t respond, check if the car battery voltage is too low or try restarting the vehicle. Regular battery maintenance is key to avoiding function failures. Folding the mirrors while driving also reduces wind resistance, saving a bit of fuel—pretty practical.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What are the techniques for parking in a diagonal parking space?

First, position your car on the right side of the parking space, then adjust the vehicle. When you see the left rearview mirror aligned with the left boundary line of the parking space, turn the steering wheel fully to the right and continue moving forward. When the longitudinal axis of the car forms an appropriate angle with the parking space, stop the car, straighten the wheels, and slowly reverse. While reversing slowly, observe both left and right rearview mirrors to ensure the vehicle is aligned straight with the parking space.
9
4
Share

How to Adjust a Loose Chain on a Underbone Motorcycle?

Lift the motorcycle using the main stand, and use an adjustable wrench to loosen the large nut counterclockwise. Use a wrench to loosen the adjusting bolt lock nut, adjust the adjusting bolt to achieve proper tightness, ensure both sides are aligned to the same scale, then tighten the adjusting bolt lock nut, and finally tighten the axle large nut.
16
3
Share

How to Calculate the Purchase Tax for a 2.0T Vehicle?

Taxable price = (Total payment made to the seller for purchasing the taxable vehicle + additional fees) × 10%. For taxpayers purchasing taxable vehicles for personal use, the taxable price is the total payment made to the seller for purchasing the taxable vehicle. Purchase tax = Total vehicle price ÷ (1 + 17%) × 10%. The calculation formula for the tax payable is: Tax payable = Taxable price × Tax rate. The vehicle purchase tax rate is 10%.
10
2
Share

What to Do When the Starter Fails to Ignite?

Failure to ignite can be caused by excessively low temperatures, carbon buildup in the car, or incorrect gear position. The reasons and solutions are as follows: Detailed Reasons: In winter, this occurs because the viscosity and rotation speed of the car's engine oil decrease in low temperatures, leading to reduced ignition energy and molecular activity in the battery. As a result, combustible gas cannot form, making it difficult to start the car. Carbon buildup in the car's engine can cause many issues, with the most common being poor car operation. Excessive moisture in gasoline, insufficient fuel types, or poor sealing of the valve seat rings can all lead to carbon buildup in the engine. Therefore, if the car is not performing well, it's advisable to check if there is significant carbon buildup in the engine and clean it promptly if necessary. Incorrect gear position can also prevent the car from starting. Automatic transmission models typically only start when in the P (Park) position; they will not ignite if in R (Reverse) or D (Drive). Solutions: First, it's important to know how to troubleshoot. Start by determining whether the failure to ignite is due to excessively low temperatures or incorrect gear position. If either of these is the case, you can resolve the issue yourself. If the problem is caused by severe carbon buildup in the engine, take the car to a repair shop for engine cleaning.
17
2
Share

What is the actual fuel consumption of the Haval H6 1.5T?

Haval H6 model has a fuel consumption of 8.3 liters per 100 kilometers. The following are the factors affecting fuel consumption and methods to reduce fuel consumption: Factors affecting fuel consumption: There are many factors that affect fuel consumption, such as driving conditions, driving habits, engine displacement, vehicle load, etc. However, the fuel consumption during normal driving usually falls within a certain range. Methods to reduce fuel consumption: Shift gears in time. Driving in low gear for a long time not only results in slow speed but also increases fuel consumption, especially when driving on slopes. The shorter the time for shifting gears, the more fuel can be saved. Reduce idle time. When driving on urban roads, you often encounter long red lights. In such cases, you can turn off the engine to save fuel.
18
2
Share

Does the Prado front axle oil need to be changed?

The front axle oil of the Prado needs to be replaced. The components of the front axle are as follows: Front Axle: As the main component, the front axle is generally made of medium carbon steel through die forging and heat treatment. Its cross-section is I-shaped, or to improve torsional strength, there is a thickened part near each end of the front axle, forming a fist shape with a through hole where the kingpin is inserted. The middle part is bent downward into a concave shape to lower the engine position, thereby reducing the vehicle's center of gravity. Steering Knuckle: It is the hinge for wheel steering and is a forked component. The upper and lower forks have coaxial holes for installing the kingpin, and the steering knuckle spindle is used to mount the wheel. The two ears of the kingpin hole on the steering knuckle are connected to the fist-shaped parts at both ends of the front axle via the kingpin, allowing the front wheels to pivot around the kingpin at a certain angle for vehicle steering. Kingpin: It connects the front axle and the steering knuckle, enabling the steering knuckle to pivot around the kingpin for wheel steering. The middle part of the kingpin has a groove. During installation, the kingpin fixing bolt 5 fits into this groove to secure the kingpin in the fist-shaped hole of the front axle.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.