How to Auto-Fold the Rearview Mirrors on the 2021 RAV4?

What is the difference between a C1 and C2 driver's license?

c1 driver's license is one of the codes for motor vehicle driver's licenses; the permitted driving scope of a C1 driver's license includes small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special operation vehicles; small passenger vehicles with a seating capacity of 9 or fewer. c2 driver's license is for small automatic transmission vehicles. Compared to the C1 driver's license, the C2 has the additional condition of being for automatic transmission. Therefore, a C2 driver's license only permits driving small vehicles equipped with automatic transmissions (AT, CVT, DCT, AMT) and does not allow driving small vehicles with manual transmissions (MT). The difference between C1 and C2 lies in the type of vehicle used for training and testing. C1 is for manual transmission small vehicle licenses, while C2 is for automatic transmission small vehicle licenses. A C1 license allows driving both small manual and automatic transmission vehicles, whereas a C2 license only permits driving small automatic transmission vehicles.

15

5

Share

What is the letter for the reverse gear?

Reverse gear, also known as the backing gear, is one of the three standard gears in a car. It is marked with the letter 'R' on the gear console and is designed to allow the vehicle to move backward, functioning as a special driving gear. In automatic transmission cars, the reverse gear is typically located at the front of the gear console, right after the P (Park) gear and before the N (Neutral) gear. Below are the instructions for using the reverse gear: 1. Manual transmission: After bringing the vehicle to a complete stop, press the clutch and brake pedals, then shift into reverse gear, followed by a slight throttle application while partially releasing the clutch. 2. Automatic transmission: To engage or disengage the R gear in an automatic car, press the brake pedal and either press the safety button on the gear lever or push the gear selector downward. Switching between P and R gears can be done directly, but when shifting between a forward gear and R gear, it is advisable to pause at the N gear to reduce the impact of reverse oil flow in the transmission.

15

3

Share

How to set the locking sound for the City?

The method to set the locking sound for the City is: 1. Insert the car key into the ignition; 2. Turn the key to power on the vehicle; 3. Tap on the vehicle's central control to enter the multimedia settings options; 4. Select the horn response option and turn it on. Taking the 2019 City as an example, its body dimensions are: length 4450mm, width 1695mm, height 1477mm, wheelbase 2600mm, minimum ground clearance 100mm, and curb weight 1078kg. The 2019 City is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131PS, maximum power of 96kW, and maximum torque of 155Nm.

16

3

Share

How to use remote start on Geely Boyue Pro?

Geely Boyue Pro's remote start method is: download the GKUI software on a mobile device, install it, and then match and connect it with the vehicle to use. This software synchronizes mobile device and vehicle information via internet connection, allowing the mobile device to remotely start the vehicle. Taking the 2021 Geely Boyue Pro as an example, its body structure is a 5-door, 5-seat SUV, with a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. The body dimensions are: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, fuel tank capacity 58L, and curb weight 1615kg.

14

4

Share

What to Do When a Car Won't Start Due to a Dead Battery?

Here are the solutions for starting a car with a dead battery: 1. Push-starting is the most common and effective emergency starting method, but it should only be used as a last resort. Frequent use can cause damage to the engine and clutch, especially in automatic transmission vehicles, which should avoid this method. 2. To avoid being unable to charge the battery when it's dead, car owners should keep a set of jumper cables in the vehicle, available at general auto parts stores. However, when connecting the jumper cables, it's crucial not to reverse the connection order. First, connect the positive terminal of the dead battery to the positive terminal of the rescue car's battery. Then, connect the negative terminal of the rescue car's battery to a metal part in the engine compartment of the dead car. 3. The most reliable method is to contact a rescue vehicle promptly, connect the jumper cables, and temporarily charge the battery to start the engine.

9

0

Share

What Lights to Use When Driving at Night?

Nighttime driving requires different lights depending on the situation: 1. Turn on the running lights when driving at night; 2. Use high beams on national highways or freeways; 3. Use low beams when driving in urban areas. Composition of car lights: 1. Position lights: Used during evening driving to make the vehicle visible to others; 2. Turn signals: Provide signals to other vehicles and pedestrians when turning, to alert them; 3. Headlights: Composed of low beams and high beams, used for illumination; 4. Fog lights: Used in foggy conditions as a light signal; 5. Reverse lights: Alert pedestrians and vehicles behind when reversing; 6. Brake lights: Alert following vehicles when braking.

6

4

Share

How to Auto-Fold the Rearview Mirrors on the 2021 RAV4?

What is the difference between a C1 and C2 driver's license?

What is the letter for the reverse gear?

How to set the locking sound for the City?

How to use remote start on Geely Boyue Pro?

What to Do When a Car Won't Start Due to a Dead Battery?

What Lights to Use When Driving at Night?

What are the reasons for difficult car ignition?

What Are the Consequences of a Broken Timing Belt?

What is the difference between a torsion beam and independent suspension in cars?

What is the displacement of 230tsi?