How to Attach the Novice Driver Sticker?

3 Answers
FernandoLynn
07/23/25 8:29pm
Correct placement is on the rear of the vehicle. Here are relevant details about the novice driver sticker: 1. Purpose: When driving, novice drivers should place the sticker in a conspicuous position on the rear window or tail section of the vehicle. Other drivers noticing this sticker can take preemptive yielding measures, facilitating understanding and consideration from fellow motorists, pedestrians, and traffic police to prevent traffic accidents. 2. Usage Method: One suction cup-style novice driver sticker and one magnetic-style sticker. The suction cup version adheres to the interior of the vehicle's rear window.
Was this review help?
14
4
Share
LaMartin
08/10/25 4:03pm
When I first got my driver's license, I was figuring out the best way to attach the novice driver sticker. It's usually placed on the rear windshield, centered and slightly lower, so it's clearly visible from behind without obstructing the rearview mirror. I used magnetic stickers—first cleaned the glass thoroughly to prevent dust from causing it to fall off, then pressed firmly to avoid air bubbles. Regulations require new drivers to display it for a full year, serving as a reminder to others that I might drive slower, giving them space. Safety is crucial, so never place it under the car or in obscure spots where it's invisible. Also, check if the sticker is loose before driving in rain, and avoid high-pressure car washes directly on it. After driving for a while, I noticed other cars tend to give more space—pretty practical.
Was this review help?
3
5
Share
Expand All
AlyssaRose
09/23/25 3:33am
I still remember my first time attaching the internship sticker. Placing it on the trunk lid was the most appropriate—the height was just right, making it both conspicuous and convenient. I used a plastic adhesive sticker and directly attached it after cleaning a smooth section of the surface to ensure it stuck firmly without bubbles. From a safety perspective, the position shouldn't be too low to obstruct the view or too high to go unnoticed. Once attached, it clearly signals to others that you're a novice, prompting extra caution. This relates to legal requirements—traffic laws mandate that new drivers display the sticker for one year to reduce rear-end collision risks. Experience has taught me to check if the sticker is loose before driving on windy days. In terms of material, both magnetic and adhesive stickers have their advantages—the former is easier to remove, while the latter is more durable. I found that having the sticker made me feel more relaxed while driving, as it added a bit of a buffer in traffic.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

How many questions are there in Subject 1, and what is the total score?

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 test for the driving license consists of 100 questions, divided into single-choice and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the paper and end the exam. Subject 1, also known as the Subject 1 theory test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes theoretical foundations of driving, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer, with a time limit of 45 minutes. Subject 1 test content: Driving license and motor vehicle management regulations; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: During the Subject 1 test, students should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Upon entering, verify your identity at the assigned seat and begin the test. Ensure the camera is aligned with you and adhere to exam discipline. If you fail the first attempt, there is a retake opportunity on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it—unsigned reports are considered invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retake or fail it, the current test session ends, and the applicant must reschedule. In contrast, Subject 2 and Subject 3 allow only five attempts. Subject 2 and Subject 3 tests must be rescheduled at least ten days later. If you fail the Subject 3 safe and civilized driving knowledge test, the previously passed road driving skills test results remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge tests.
17
0
Share

How to Repair Engine Block Deformation Caused by Overheating?

If the engine block is deformed, it can only be replaced. The following introduces the repair method for engine block cracks: 1. Use coarse sandpaper to remove rust around the crack on the engine block. When sanding to a certain extent, the end of the crack can be located. 2. Then, directly perform welding with a patch plate. However, be cautious of warping at the welded area. If warping occurs, immediately hammer the welded area while it's still hot to prevent residual slag. 3. After patching, place an asbestos gasket between the patch plate and the engine block (or cylinder head), and apply a layer of lubricating oil on both sides.
13
2
Share

What does the check light mean?

check light is the engine fault light, which indicates that there is a problem with the engine when it illuminates. Here are some introductions about car fault lights: 1. There are many indicator lights on a car, such as the engine self-check indicator, oil pressure indicator, handbrake indicator, and coolant temperature indicator, each representing different meanings. Generally, when a red light comes on, you should be extra vigilant, contact professionals for solutions, and avoid continuing to drive. 2. If a problem occurs, promptly go to a 4S shop for vehicle inspection and repair to avoid risks and ensure personal safety on the road.
19
3
Share

Can You Die from Sleeping in a Car with the Windows Closed?

Sleeping in a car with the windows closed can indeed be fatal. Here are the reasons: 1. In a sealed vehicle, the oxygen supply is limited. As a person sleeps, they continuously consume oxygen without fresh air replenishment, leading to hypoxia, suffocation, and potentially death. Additionally, most car interiors are made of PVC (polyvinyl chloride) derived from petroleum, and the adhesives used contain formaldehyde. In an enclosed space, occupants are prone to dizziness. 2. If the air conditioning is running, the car produces significant amounts of carbon monoxide. The concentration of carbon monoxide increases over time, exceeding safe levels within approximately 20 minutes, causing noticeable suffocation symptoms.
4
1
Share

How to Repair a Blocked Expansion Valve?

Here are the methods to repair a blocked expansion valve: 1. For dirt blockage, if it is not very severe, replacing a dry filter is sufficient; if it is very severe, it is necessary to clean the impurities in the system pipeline again, vacuum, and recharge the refrigerant. 2. For slight ice blockage, you can apply a hot towel to the ice blockage area; if the ice blockage is more severe and has affected the normal operation of the system, it is necessary to clean the moisture in the system pipeline again, vacuum, and recharge the refrigerant. 3. Expansion: The main cause of dirt blockage is the presence of impurities in the system, such as welding slag, copper chips, iron chips, fibers, etc. The cause of ice blockage is excessive moisture in the system.
18
5
Share

How much horsepower does the Toyota Prado 2700 have?

Toyota Prado 2700 has a maximum power output of 120kW (163 horsepower) at 5200 rpm. Relevant information about the Toyota 2700 is as follows: 1. The Toyota Prado 2700 is equipped with a newly developed Toyota 2TR-FE engine, a four-cylinder electronic fuel injection system with a displacement of 2694cc. It offers excellent power performance and meets the latest Euro III emission standards, making it highly environmentally friendly. 2. The advanced engine of the Toyota Prado 2700 provides strong output power and torque, paired with a highly robust frame and reinforced suspension system, resulting in impressive off-road capability and passability.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.