How to associate a vehicle with Geely GNetLink?

How Many Seats Can a B1 Driving License Drive for Passenger Vehicles?

B1 driving license can drive passenger vehicles with more than 8 seats and less than 19 seats. The following is the relevant introduction about B1 driving license: Permitted Vehicle Types for B1 Driving License: B1 driving license can drive "medium-sized passenger vehicles" (medium-sized passenger-carrying vehicles) and small cars. According to the "Road Traffic Safety Law of the People's Republic of China", passenger vehicles with more than 8 seats and less than 19 seats in China are called medium-sized passenger vehicles. Small cars refer to vehicles with a total mass of 4.5t (inclusive), a seating capacity (excluding the driver) of 9 people (exclusive), or a vehicle length of less than 6m (exclusive). Other Vehicle Types Permitted by B1 Driving License: C1, C2, C3, C4, M.

14

1

Share

Where is the interior lighting located?

Interior lighting includes instrument panel lights, ambient lights, and dome lights, with their positions varying depending on the car model. Below are the locations of various lighting fixtures: Front and Rear Dome Lights: The most commonly used interior lights are the front and rear dome lights, also known as reading lights. There are buttons next to these lights, typically offering three modes: ON (constant illumination), DOOR (lights on when the door is open and off when closed), and OFF (lights off). When set to DOOR, the lights automatically turn on when the door is opened and off when it is closed. LCD Lights: Some LCD instrument panels light up automatically when the car is started, while analog gauge clusters illuminate when the headlights are turned on. In addition to instrument panel lights and dome lights, there are also glove compartment and trunk lights, which automatically turn on when the front passenger-side glove compartment or trunk is opened and off when closed. Special Model Lights: Some luxury cars feature ambient lighting, such as Rolls-Royce's starlight headliner. These lights are not for illumination but to enhance the cabin atmosphere and elevate the interior's premium feel. Most ambient lighting adjustments are made via the central control screen, with some cars offering multiple color options.

10

0

Share

What to Do If the Self-Priming Pump Keeps Tripping?

The main reasons for a self-priming pump tripping too frequently are low pressure or a faulty automatic switch. Below are the reasons why a self-priming pump may trip too often: Low Pressure: The delivery distance is long, the height is high, the required pressure is significant, and the pressure set on the pressure controller does not meet the usage requirements. Lack of a Check Valve: If the user did not install a check valve at the inlet and outlet when installing the self-priming pump, water quickly flows back after the pump stops. When the outlet pressure drops below the preset pressure, the fully automatic self-priming pump will restart. The solution is to install a check valve at the outlet of the self-priming pump. Faucet Not Fully Closed: If the faucet is not properly closed or there is water leakage elsewhere, the outlet pressure will drop, causing the self-priming pump to restart automatically. Check the faucet's closure status and identify any leaks as the solution. Faulty Automatic Switch: If a fully automatic self-priming pump that was previously functioning well suddenly starts frequently turning on and off, the automatic switch may be faulty. Replacing the automatic switch can help determine if the issue persists.

12

2

Share

What Causes the ABS Light to Illuminate on the Dashboard?

There are multiple scenarios where the ABS light may illuminate, each with different causes and solutions, as detailed below: Scenario 1: ABS warning light stays on continuously (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect wheel speed signals. This prevents the ABS control module from determining vehicle speed or wheel slip rate, thus failing to issue appropriate braking commands. Solution: Clean the wheel speed sensor and adjust the gap between the sensor and the tone ring to restore normal function. Cause 2: Loose wiring connections or poor contact in ABS relays causing signal interference. Solution: Inspect all wiring connections and secure any loose terminals. Scenario 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: Battery voltage drops below 10.5V when multiple electrical components are in use. The light extinguishes when engine RPM increases and voltage rises. Possible low voltage supply to ABS system due to poor connections or grounding issues. Solution: Check battery specific gravity; inspect charging system; verify power supply connections (voltage relay or power contacts). Scenario 3: ABS light remains on after engine start until ignition is turned off. Cause: Poor grounding connection of ABS hydraulic valve body; faulty wiring harness connector; ABS control module malfunction. Solution: Loosen and retighten hydraulic valve body ground screw, clean contact surfaces if necessary; inspect connector gaps; replace ABS or ABS/ASR control module. Scenario 4: ABS warning light activates during high-speed driving. Cause: Significant discrepancy between front and rear wheel speed signals detected by ABS module; incorrect tire or wheel rim specifications. Solution: Verify correct tire and wheel rim specifications as indicated on vehicle's fuel filler door label. Scenario 5: ABS warning light flashes intermittently. Cause: Improperly adjusted brake light switch; internal contact failure in brake lights. Solution: With engine running, depress brake pedal and manually push brake switch linkage downward to reset position; replace brake light switch if needed. When the ABS warning light is illuminated, it's recommended to avoid continued driving as this indicates anti-lock braking system malfunction. During emergency braking, wheel lock-up may occur, causing loss of vehicle control and inability to decelerate or adjust trajectory, posing significant safety risks.

12

0

Share

What is the fuel consumption of the Porsche 911?

Porsche 911 has a fuel consumption of 10.2L/100km. Below is the relevant introduction: Porsche 911: The Porsche 911 is a sports car produced by the German automaker Porsche. It was designed by Ferdinand Alexander Porsche. Model Introduction: The Porsche 911 series, designed by Ferdinand Alexander Porsche, is a legendary model of Porsche. Its long history and each classic model have had a profound impact on several generations. Model Classification: The Porsche 911 series is divided into the Carrera series, Targa series, Turbo series, Turbo S series, and GT series.

8

5

Share

What is the fuel consumption of the Malibu XL?

The official combined fuel consumption is 6.4L/100km. Below is the relevant introduction: Chevrolet Malibu: The full name of the Malibu is Chevrolet Malibu, born from General Motors' mid-to-high-end car lineup, sharing the same platform as Buick's "Double Jun" series. Vehicle Design: The Malibu adopts Chevrolet's new family-style front face design, combining a U-shaped grille with a honeycomb front grille. The headlight design somewhat resembles the current Buick Excelle GT's style. The overall design gives a sense of grandeur and stability. The rear taillights feature LED design. The rear end draws inspiration from the Camaro, with square taillights and robust dual exhaust pipes showcasing a strong American sense of power.

19

4

Share

How to associate a vehicle with Geely GNetLink?

How Many Seats Can a B1 Driving License Drive for Passenger Vehicles?

Where is the interior lighting located?

What to Do If the Self-Priming Pump Keeps Tripping?

What Causes the ABS Light to Illuminate on the Dashboard?

What is the fuel consumption of the Porsche 911?

What is the fuel consumption of the Malibu XL?

How to Remove the Seat Cushion of a Shandeka Seat?

How to Remove the 90 km/h Speed Limit on Shacman Trucks?

What are the steps after getting in the car?

What are the advantages of using 95-octane gasoline?