How to Apply Window Tint Film to Car Glass?
1 Answers
Steps for applying window tint film to car glass: 1. To avoid dust and impurities affecting the tinting effect, the first step is to thoroughly clean the car's glass before applying the film; 2. Areas that may be damaged during the tinting process should be covered in advance to prevent scratches on the car paint, interior, etc. Any accessories that might interfere with the installation should also be removed beforehand; 3. Cut the tint film according to the size of the glass for an initial fit; 4. Apply the roughly cut film to the car glass, then heat-shrink the film for the front and rear windshields to match the curvature of the glass. This ensures the film adheres smoothly to the glass without water marks; 5. After heating, the film will fit snugly on the glass. At this point, fine-tune the film by precisely cutting it to match the shape of the glass; 6. Window tint film is applied to the inside of the glass, so a crucial step is the final application. The interior side of the glass must be cleaned thoroughly, and the film must be applied quickly and accurately, with any moisture promptly smoothed out; 7. After completing the tinting for the entire car, inspect each window, especially the edges and corners. If any bubbles are found, address them immediately.
