How to Apply for Vehicle Lottery Registration as an Individual in Tianjin?

2 Answers
SerenityMarie
07/29/25 5:47am
Tianjin vehicle lottery individual application registration process is as follows: 1. Open the Tianjin Passenger Car Regulation Management Information System, click on the "Increment Indicator Application" and "Individual Application" menus to enter the individual application interface; 2. Read the Tianjin Passenger Car Total Volume Regulation Management Measures (Trial), select "Identity Type", then click "Next"; 3. On the application form interface, carefully read all prompts, fill in the corresponding information truthfully, and read the prompts at the bottom of the page. After confirming that the information is correct, click "Next"; 4. After the system prompts that the application is successful, you can view the personal application form. You can also log in later through the login window on the homepage using your mobile phone number and password to check.
Was this review help?
9
4
Share
MacMaverick
08/12/25 9:19am
Applying for a car license plate lottery in Tianjin as an individual is actually quite simple. I often help my family members with this process. First, you need to visit the official website of Tianjin Passenger Car Quota Regulation Management Information System. If you don’t have the URL, just search for 'Tianjin license plate lottery'. Once there, register a new account by filling in basic information like your ID number and mobile phone number. After successful registration, log in to the system and submit your personal details as prompted, including a scanned copy of your local residence permit, a photo of your valid driver’s license, and social security proof documents for the past few months. Make sure the uploaded files are clear and complete—don’t be careless. After submission, the system will automatically review your application, and you’ll typically get the result in about two or three days. If approved, you can participate in the lottery for that month or the next. Note that the application period is fixed at the beginning of each month—if you miss it, you’ll have to wait until next month. That’s why I always remind people to set a phone reminder and apply early for peace of mind. The winning rate isn’t high, only around 5%, but persistence pays off. Once you get the quota, you must buy a car and complete the license plate registration process as soon as possible—the quota is only valid for three months, and it’ll be wasted if it expires. The entire process is free, so don’t fall for any paid intermediary services; just operate online directly to save money and stay safe. Although the system is a bit cumbersome, I think it effectively controls the number of urban vehicles and helps alleviate traffic congestion.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Can ETC be installed on the black area of the car's front windshield?

The ETC device can be installed on the black dotted area of the windshield, as long as it does not obstruct the driver's view and can sense the toll station's detection equipment. However, installing it on the black dotted area of the windshield also has drawbacks, such as reduced solar charging capability of the ETC device, which may lead to power depletion over time. For small cars, the ETC is generally installed in the upper middle part of the front windshield, while for large vehicles like trucks and buses, the installation position is in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with built-in or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight band. Here are some considerations for installing ETC: Do not obstruct the view; it's best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which can reduce the driver's field of vision. If this is not considered when installing the ETC, it may increase the driver's blind spots. Installing it on the right side behind the rearview mirror can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black dotted areas of the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal rod connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal rod in. If the tag is removed arbitrarily, the rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent issues caused by the ETC device of the vehicle in front, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic payment for the preceding vehicle. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to payment failure. When using a debit card linked to ETC, insufficient balance may also cause payment failure.
1
2
Share

How often should the brake fluid be changed in the new Lavida?

Introduction to the brake fluid replacement interval for the new Lavida: The brake fluid in the Lavida should be changed every 30,000 kilometers or every two years. After prolonged use, the brake pump will experience varying degrees of wear, making it advisable to replace the car's brake fluid. Below is relevant information about automotive brake fluid: 1. As the medium that directly transmits braking pressure in a car's braking system, the performance of brake fluid significantly impacts the effectiveness of the car's braking force. Since brake fluid is hygroscopic, it continuously absorbs moisture from the surrounding air during use. 2. If brake fluid remains in the braking system for too long and absorbs a sufficient amount of moisture, vapor lock may occur in the system's pipelines during braking, affecting braking performance. In severe cases, this can even lead to complete failure of the braking system. Therefore, to ensure driving safety, automotive brake fluid should be strictly replaced at the recommended intervals.
9
0
Share

How to Deal with Fuel Tank Negative Pressure?

Clean or Replace the Charcoal Canister The charcoal canister is a crucial component in a car. If the charcoal canister becomes dirty or fails, blocking the fuel line, it can cause negative pressure in the fuel tank. If negative pressure occurs, the first step should be to check whether the charcoal canister is malfunctioning. Below is information about automotive fuel tanks: 1. Automotive fuel tanks are divided by function into standard tanks and heated tanks. Design Principle: Utilize the heat energy generated by the engine during operation, adding a thermal circulation system between the engine, fuel tank, and radiator. The original single fuel tank is redesigned into a combined fuel tank consisting of a main tank and an auxiliary tank. 2. A water heater is installed at the bottom of the fuel tank to use the heat energy generated by the engine to warm the main tank. The fuel supply pipe of the main tank and the fuel pipe of the auxiliary tank are connected to the engine fuel line through a fuel line switching valve. The auxiliary tank is used when starting the car, and after driving 5-8 kilometers, the switching valve is operated to switch the fuel line to the main tank. The main tank is filled with #0 oil, and the auxiliary tank is filled with #35 oil.
15
1
Share

Does the Changan Oshan X7 have a seven-seater version?

Changan Oshan X7 does not offer a seven-seater version. Here is some information about the Changan Oshan X7: 1. The Oshan X7 only provides a 5-seater model, but it boasts excellent space performance, especially the legroom in the second row, which can be described as outstanding. 2. The new car is positioned as a compact SUV, clearly differentiated from the mid-size SUV Oshan Kosai, maintaining a reasonable price level, which better continues Changan Oshan's practical and high-value-for-money approach. 3. The interior design is consistent with the exterior, both featuring a modern feel; it is also well-equipped, with LED light sources as standard across the entire range.
12
0
Share

What Are the Car Tire Maintenance Items?

Car tire maintenance items include: checking all tires including the spare tire, and inspecting tire pressure for any bulges, cracks, cuts, punctures, or abnormal tread wear. Below is information about car tire maintenance: 1. Tire inspection should be conducted at least once a month. Check the tire pressure when the tires are cold, including the spare tire. 2. If the owner notices that the tire pressure decreases too quickly, the cause should be identified promptly instead of simply going to a tire shop for inflation. The inflation pressure must follow the value specified by the car manufacturer. 3. The tread wear indicator is located at 1.6 mm remaining groove depth. When the tire wears down to this indicator, it must be replaced. Driving with tires worn beyond the indicator is very dangerous on wet roads because the drainage performance is significantly reduced, severely affecting wet traction. 4. Regularly check wheel alignment and balance. Especially when excessive vehicle vibration is noticed, it may indicate poor wheel alignment or imbalance. These conditions not only shorten tire life but also affect vehicle handling and endanger driving safety. 5. Special attention should be paid when replacing tires to ensure that the tires on the same axle are uniform in specifications, structure, brand, and tread pattern.
14
0
Share

What is the function of the crank-connecting rod mechanism?

The crank-connecting rod mechanism converts the reciprocating motion of the piston into the rotational motion of the crankshaft, while transforming the force acting on the piston into the torque output by the crankshaft to drive the rotation of the car's wheels. The crank-connecting rod mechanism consists of three main parts: the engine block group (including stationary components such as the cylinder block, crankcase, oil pan, cylinder liner, cylinder head, and cylinder gasket), the piston-connecting rod group (including moving components such as the piston, piston rings, piston pin, and connecting rod), and the crankshaft-flywheel group (including mechanisms such as the crankshaft, flywheel, torsional vibration damper, and balance shaft). There are three types of crank-connecting rod mechanisms: double crank, double rocker, and crank-rocker. A component that can perform circular motion is called a crank, while one that can only swing within an angle less than 360° is called a rocker. A double crank mechanism involves one crank driving another crank to rotate, while a double rocker mechanism involves one rocker driving another rocker to swing. In a crank-rocker mechanism, when the crank is the driving component, it performs circular motion to drive the rocker to swing; when the rocker is the driving component, it swings to drive the crank to perform circular motion.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.