How to Apply for Safety Education on 12123 with an A License Deduction?

What is the tire model and specification for the Luxgen U6?

The tire model and specification for the Luxgen U6 is 215/55R17. The first number, 215, indicates that the tire width is 215MM. The number 55 represents the aspect ratio of the tire's cross-section, which is 55%, meaning the height of the cross-section is 55% of the width. The letter R stands for radial tire, and 17 indicates that the rim diameter is 17 inches. The Luxgen U6 has a top speed of 135km/h, accelerates from 0 to 100km/h in 3.2 seconds, and has a fuel consumption of 4L per 100km. In addition to the model, the following common data are also marked on the tire: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent the certified speed ratings of the tire, ranging from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".

15

1

Share

What brand is the diesel engine of BAIC BJ40?

The engine model for the diesel version of BJ40 is YC4Y20. The BAIC BJ40 diesel version is equipped with a Yuchai 2.0T direct-injection turbocharged engine, with a maximum horsepower of 224, a maximum power of 120KW, a maximum power speed of 5200rpm, and a peak torque of 380N.m. The engine of BAIC BJ40 is produced by Saab. Beijing Automobile Works was established in 1958 and is the second large-scale automobile manufacturing enterprise in China after the First Automobile Works in Changchun. For daily maintenance of the BAIC BJ40 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid faults, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve and still bring dirt back to the lubrication parts, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, water, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder generated by part wear to form sludge. When the amount is small, it suspends in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.

13

0

Share

What are the differences between 2.4L and 2.0T?

2.0T refers to turbocharging, which utilizes engine exhaust gases to increase the air pressure at the engine intake valves, thereby boosting the oxygen content inside the engine and enhancing its power. 2.4L refers to naturally aspirated engines. Below are the main differences between 2.4L and 2.0T: 1. Turbocharged cars have faster acceleration and shorter speed-up times; naturally aspirated cars provide smoother power delivery in the later stages, making them more suitable for long-distance driving. 2. Turbocharged engines have higher maintenance costs, while naturally aspirated cars are relatively more economical to maintain in the long run.

14

1

Share

Can the Dash Cam Only Be Viewed in the Car?

Dash cam can only be viewed in the car. Requirements: Before installing the dash cam, the installation area on the windshield should be cleaned thoroughly. If it is an adhesive-mounted dash cam, the installation area must be free of water. You can use a hairdryer to heat the adhesive tape, which will improve the adhesion and make it more secure. Introduction to Dash Cam: A dash cam is a device that records images, sounds, and other relevant information during vehicle travel. After installing a dash cam, it can record the entire driving process, including video images and sound, which can provide evidence in case of traffic accidents.

16

3

Share

Can the trunk be opened while the car is moving?

It is not possible to open the trunk while the car is moving. Reasons why the trunk cannot be opened: According to legal regulations, vehicle doors must be properly closed while driving, otherwise a fine may be imposed. Functions of the trunk: Storing spare items and carrying cargo; the trunk can hold bulk items; there is a mechanical switch inside the trunk to open the trunk lid for emergency escape if needed. The car trunk contains the spare tire, vehicle first aid kit, onboard tool kit, warning triangle, fire extinguisher, car refrigerator, emergency fuel tank release cable, and for some vehicles, the starter battery is also located in the trunk.

20

0

Share

Where to add water in Emgrand GS?

Emgrand GS water is added in the engine compartment. Emgrand GS water is mainly divided into 3 types: summer type, winter antifreeze type, and special antifreeze type. The specific introductions are as follows: 1. Summer type: mainly adds insect removal gum ingredients to the cleaning fluid, which can quickly remove the residues of insects hitting the windshield. 2. Winter antifreeze type: mainly ensures that it will not freeze and damage car facilities when the external temperature is below -20℃. 3. Special antifreeze type: mainly ensures that it will not freeze even at -40℃, suitable for use in extremely cold regions.

15

1

Share

How to Apply for Safety Education on 12123 with an A License Deduction?

What is the tire model and specification for the Luxgen U6?

What brand is the diesel engine of BAIC BJ40?

What are the differences between 2.4L and 2.0T?

Can the Dash Cam Only Be Viewed in the Car?

Can the trunk be opened while the car is moving?

Where to add water in Emgrand GS?

Can I directly apply for a motorcycle driver's license?

How to Fold the Rearview Mirrors of the 2020 Sylphy?

How is the power of the Lavida 1.5?

Will running a red light at an intersection without red light cameras be captured?