How to Apply for an Online Driver's License?

1 Answers
StVera
07/30/25 2:34am
"Motor Vehicle Driver's License Application Form", which requires the applicant's signature; motor vehicle driver's license. Identity proof of the motor vehicle driver; if the applicant cannot be present, a jointly signed application form by the applicant and the agent is required. A medical certificate issued by a county-level or above medical institution or a military medical institution at the regimental level or above, proving the applicant's physical condition. A straight-edged, front-facing, bareheaded, color, single-person half-length ID photo taken within the last 6 months before applying for the motor vehicle driver's license.
Was this review help?
20
5
Share
More Forum Discussions

Where is the battery located in a BMW X5?

BMW X5's battery is located in the engine compartment, specifically on the side closer to the driver's cabin. The battery model for BMW X5 is an AGM battery, and any battery with the same specifications can be used interchangeably. AGM batteries have a cyclic charging capacity three times higher than lead-calcium batteries, offer more reliable cold starts, and provide far better starting performance when voltage is low compared to regular batteries. The BMW X5 is BMW's first four-wheel-drive SUV model, with dimensions of 4909mm in length, 1938mm in width, and 1772mm in height, and a wheelbase of 2933mm. The BMW X5 is equipped with two 8-inch color displays on the back of the front seats, including a rear central console and an integrated DVD player, DVD storage box, and remote control. It also provides an infrared interface and wireless headphones, and the rear seat area temperature can be individually adjusted.
5
2
Share

How to Steer the Wheel?

Methods for steering the wheel: 1. Hold the steering wheel properly with both hands at the 3 and 9 o'clock positions; 2. When turning the car, pull the left hand to the 1 o'clock position and release the right hand from the wheel; 3. Grip the wheel at the 3 o'clock position, then quickly release the left hand, grip at the 9 o'clock position, and move towards the 1 o'clock position. After completing the turn, return the wheel to its original position; 4. When making a left turn, pull the right hand to the 11 o'clock position, release the left hand, grip at the 9 o'clock position, then release the right hand, quickly grip at the 9 o'clock position again, and move towards the 11 o'clock position; 5. After completing the turn, return the wheel to the straight driving position. If the turn is large, continue turning; 6. For a U-turn, pull the right hand to the 11 o'clock position, release the left hand, grip at the 9 o'clock position, then as the left hand grips, quickly release the right hand, grip at the 3 o'clock position, and pull to the 11 o'clock position until the wheel is fully turned.
20
1
Share

How to adjust the time on MG cars?

The method to adjust the time on MG cars is: 1. Briefly press the trip computer control button to navigate to the option following the vehicle travel time; 2. On the seventh short press, when only a clock display appears, press and hold the trip computer control button until the clock digits start flashing, then briefly press to confirm. Taking the MG6 as an example, its dimensions are 4695mm in length, 1848mm in width, and 1462mm in height, with a wheelbase of 2715mm. The MG6 comes standard with 18 luxury features, adopts a new design language, and is equipped with a 1.5T turbocharged engine. The exterior features MG's signature family front grille, with a shield-shaped front grille paired with sharp headlight clusters. The headlight clusters continue to incorporate the same "London Eye" design as seen in the MG ZS. The vehicle also comes with a 10.1-inch high-definition touchscreen and an intelligent connectivity system.
12
1
Share

What are the reasons for car headlights not working?

Reasons for car headlights not working: 1. Short circuit in the power line before the light switch, filament burnout, or fuse blown; 2. Poor contact or closure of the bimetallic strip in the light switch, or damage to the light switch, where one position of the light switch is properly connected, but some light line contacts are disconnected due to the bimetallic strip. Fault diagnosis and troubleshooting should first determine the diagnostic scope, then probe according to the sequence of the lighting system circuit to identify any open or short circuits at a specific location. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the external image of the car owner but are also closely linked to safe driving at night or under adverse weather conditions. With the increasing number of vehicles on the road, when encountering some reckless drivers, it is advisable to use headlights and horns reasonably to send appropriate warning signals.
2
3
Share

How to Repair Scratches on Glass?

Methods for repairing scratches on glass: 1. Small scratches can be removed by polishing; 2. Glass scratch repair agents can be used, where the gel is applied along the crack to fill it, but this is only suitable for minor scratches; 3. For severe scratches, it is recommended to visit a professional auto beauty shop or 4S store for repair; 4. For deep scratches, it is advisable to find a reliable and reputable professional repair shop; 5. Apply a small amount of polishing compound to the glass, spray water from a spray bottle, and begin polishing. During the polishing process, continuous water flow is necessary to prevent the glass from overheating, and the repair area should not become too hot to touch. When using an adjustable-speed angle grinder for polishing, ensure the movement follows a back-and-forth zigzag or circular path, avoiding any pauses at a single point to prevent severe deformation.
15
4
Share

What to Do When the One-Button Start Shows 'No Key'?

Solutions for the one-button start showing 'nokey': 1. Charge the key; 2. Replace the sensor. Reasons for displaying 'nokey': 1. The smart key is low on battery, and the start system cannot detect the weak signal emitted by the key; 2. Sensor malfunction: There are sensors for detecting the key in locations such as the vehicle's dashboard, under the center console, and under the rear seats. If these sensors malfunction or their connectors become loose, the vehicle may fail to detect the key. The one-button start is part of a smart car, a button device designed to simplify the starting process, which can also turn off the engine. This device can be retrofitted in the original key lock position or as an independent panel. Many cars now come equipped with this smart feature to enhance market competitiveness, and it can be installed in vehicles of all configurations, whether high or low.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.