How to Apply for an Electronic Driver's License in Suzhou

2 Answers
StJack
07/24/25 11:25pm
Download the Traffic Management 12123 app and click to enter the login homepage. Click on the user registration at the bottom, and enter the required information, such as ID type, ID number, name, mobile phone number, etc. Click next, then set a pattern unlock password to complete the registration.
Was this review help?
1
5
Share
StWalter
08/10/25 3:21pm
Applying for a Suzhou electronic driver's license is quite easy—I just did it last year. First, you need to download the Traffic Management 12123 App on your phone, register an account with your phone number, and complete the step-by-step identity verification, including facial recognition and uploading a photo of your ID card. After logging in, go to the driver's license services section on the homepage, click on the electronic driver's license application, and upload a recent photo as required. The photo must be a front-facing, bareheaded shot with good lighting and a simple, uncluttered background. After uploading, submit the application, and the system will automatically review it. You'll get the results in a few minutes or hours. Once approved, the electronic version will appear in the App, and you can simply show your phone for checks or official matters—much more convenient than carrying a physical card. Make sure all the information is correct, as non-compliant photos will require resubmission. Suzhou uses this national unified platform via the App, which is eco-friendly and efficient. I recommend regularly checking for App updates to ensure it's always ready for use.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

Does the BMW 8 Series Have a Carbon Fiber Roof?

The BMW 8 Series does not have a carbon fiber roof; only the BMW M8 is equipped with a carbon fiber roof. The BMW 8 Series is a large GT sports car under the BMW brand, and this model is equipped with a 3.0-liter turbocharged engine across the entire lineup. This 3.0-liter turbocharged engine delivers 340 horsepower and a maximum torque of 500 Nm, with the peak torque available between 1,600 and 4,500 rpm. The engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The BMW 8 Series uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The double-wishbone suspension is a structurally complex setup, but it significantly enhances the vehicle's handling performance.
13
5
Share

How to Solve the Sunroof Rattle in the 2015 Highlander?

2015 Highlander sunroof rattle solutions: 1. Open the sunroof fully and spray maintenance agent on the sealing rubber strip; 2. If the sunroof rattle is caused by loose screws, locate and tighten the sunroof screws; 3. Use a towel to remove dust particles from the sunroof sliding track; 4. Clean the rubber strip area thoroughly and apply some lubricating oil. The 2015 Highlander is a mid-size SUV with body dimensions of 4890mm in length, 1925mm in width, and 1720mm in height, and a wheelbase of 2790mm. In terms of power, the Highlander is equipped with a 2.0-liter turbocharged engine across all models.
1
3
Share

How to Ride a Motorcycle for Better Fuel Efficiency?

Methods to improve fuel efficiency when riding a motorcycle: 1. Reduce the maximum riding speed. Generally, within speeds of 100 km/h, fuel consumption does not increase significantly with speed. However, once the speed exceeds 100 km/h, fuel consumption will experience a substantial leap. 2. Actively reduce air resistance to save fuel. When riding at high speeds, lean your body forward, tuck your helmet into the windshield, and avoid riding in an upright position, which creates significant wind resistance. 3. Shift to higher gears as quickly as possible. When the engine operates at high RPMs, internal losses also increase sharply. This rapid acceleration does not effectively translate into speed improvement through proper gear ratios. Maintaining mid-to-low RPMs while riding is more fuel-efficient.
9
3
Share

How Often Should Gear Oil Be Replaced?

Gear oil should be replaced approximately every 40,000 kilometers to effectively improve the efficiency of power transmission from the engine. Currently, there are mainly two types of gear oil: synthetic oil and mineral oil. Synthetic oil has a long lifespan and does not need replacement within 200,000 kilometers, whereas mineral oil is different, requiring replacement every 2 to 3 years or every 40,000 to 60,000 kilometers. Different types of transmissions and drive axles use different viscosity grades. Small passenger vehicles typically require a viscosity grade of 75w90, while large trucks and drive axles need 80w90. Gear oil should possess excellent anti-wear and load-bearing properties, along with suitable viscosity. Additionally, it should have good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention capabilities.
19
3
Share

Can Used Car Tires Be Used?

Used car tires can be used, but when purchasing used tires, it is important to check for severe wear, deformation, uneven wear, or cracks in the tire body. Methods to identify used tires: 1. Observe the color and pattern of the tire tread—poor-quality retreaded tires often appear shiny and glossy, while genuine tires look relatively dull. 2. Inspect the joint between the tread and the sidewall—retreaded tires have a self-made tread bonded to an old tire carcass, making the joint between the tread and sidewall less smooth and rounded compared to new tires. Car tires are one of the essential components of a vehicle, directly in contact with the road surface. They work together with the car's suspension to absorb shocks during driving, ensuring good ride comfort and smoothness. They also maintain strong traction between the wheels and the road, improving the vehicle's traction, braking, and off-road capability.
4
3
Share

How many kilometers should a car drive before replacing the timing belt?

A car should replace the timing belt after driving 60,000 to 80,000 kilometers. The timing belt operates at high speeds for extended periods, inevitably experiencing wear and tear as it is a consumable item that requires regular replacement. It is advisable to routinely inspect the belt surface for cracks and signs of wear. If significant wear or cracks are detected, the belt should be replaced promptly. The timing belt is a crucial component of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and maintaining a specific transmission ratio. The use of a belt instead of gears for transmission is due to its quieter operation and minimal self-variation. However, the lifespan of a belt is inherently shorter than that of metal gears, necessitating periodic replacement.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.