How to Apply for a Vehicle Operating License?

What Causes the Engine Warning Light to Illuminate in a Tiida?

The engine warning light in a Tiida may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel and oil quality issues: Failure to use the fuel and oil as recommended by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor combustion of the air-fuel mixture: Poor combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can all lead to poor combustion. Turbocharging issues: Problems with the intake turbocharging pipeline or turbocharger can also cause the engine warning light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake issues: If the car's intake system has problems, it may lead to engine pipeline blockages, and in severe cases, the engine warning light will illuminate. A dirty air filter that hasn't been cleaned regularly can cause intake problems. Exhaust issues: Exhaust system faults can also trigger the engine warning light. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings. The catalytic converter is most frequently affected. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can all lead to catalytic converter failure. Anti-theft system malfunction: If the car's electronic anti-theft system fails or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, and the engine warning light will illuminate. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. Look for issues such as shaking or black smoke. If present, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can start, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The car will enter self-check mode upon powering on. Wait for 5-10 seconds and observe if the warning light turns off. If the warning light remains on, visit a service station as soon as possible. The service station can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.

20

4

Share

What could be the reason for a car's air conditioning suddenly failing to start?

If a car's air conditioning suddenly stops responding, it could be due to blocked pipelines, excessively high or low pressure; poor heat dissipation; a blocked expansion valve; too little or too much refrigerant; or the compressor not operating. Check the pressure of the refrigerant; if the pressure is too low, it indicates a lack of refrigerant, which needs to be replenished, as insufficient refrigerant can affect the cooling performance of the air conditioning. Also, check whether the blower in the air conditioning system is operating normally and the size of the air flow. Below is an introduction to air conditioning maintenance: 1. Comprehensive inspection of the air conditioning: When using the air conditioning for the first time in summer, first inspect the air conditioning system, such as checking the refrigerant and whether the air conditioning filter is too dirty through the reservoir, and whether there are any foreign objects in the radiator. 2. Pay attention to the cleaning of the air conditioning: The air conditioning filter should be replaced regularly; otherwise, the air conditioning may produce a musty smell. Additionally, the condenser should also be cleaned periodically, and the radiator should be removed for thorough cleaning.

17

1

Share

What does it mean when ETC expires?

ETC expiring means that the ETC electronic tag becomes invalid and cannot be used, which also includes situations where the ETC card expires and becomes unusable. Simply put, the reasons for ETC showing as expired may include self-disassembly or movement of the OBU device, ETC running out of power, or the ETC electronic tag falling off or becoming loose, all of which can cause ETC to expire and become invalid. More details are as follows: 1. ETC refers to the most advanced toll collection system currently used on highways, which processes deductions from the highway payment card inserted into the electronic tag and controls the automatic lifting of lane barriers. 2. In most cases, if ETC expires or becomes invalid, users are advised to take the ETC device and ETC card to a bank's ETC service outlet for inspection and replacement of the device. 3. ETC has been well-developed in China, and wherever ETC is installed, vehicles can pass through highway toll stations without stopping for automatic payment.

15

4

Share

What are the new regulations for the second subject of the driving test in Guangdong?

The new regulations for the second subject of the driving test in Guangdong are as follows: 1. Small automatic transmission vehicles: The test content for small automatic transmission vehicles has been adjusted, with the "slope fixed-point parking and starting" item being removed from the second subject test. The number of test items has been reduced from 5 to 4, making it more aligned with actual driving requirements and reducing the test burden on candidates. 2. Test appointment time: The test appointment time has been adjusted. For applicants applying for a small automatic transmission vehicle driving license, the interval between the first subject test pass and the third subject test appointment has been reduced from 30 days to 20 days. For those upgrading to a large or medium-sized passenger or truck driving license, the interval has been reduced from 40 days to 30 days, thereby reducing waiting time for the test.

1

Share

Why Doesn't the Steering Wheel Return to the Center Position?

Analysis and solutions for why the steering wheel does not return to the center position are as follows: 1. Cause Analysis: In 99% of cars, the steering wheel automatically turns back toward the straight position after making a turn. This is not a design feature of the steering wheel but occurs because the tires tend to move in the direction of least resistance as the car continues forward, which is the straight direction. This causes the steering wheel to "automatically" return to the center. Some vehicles have tires that are too small, resulting in minimal contact area with the ground, which reduces the tendency for the tires to return to the straight position. 2. Solution: Adjust the wheel alignment: Generally, when a vehicle exhibits a steering wheel that does not return to the center, the first solution to consider is adjusting the wheel alignment. Wheel alignment refers to the relative position relationship between the wheels and the chassis (wheels, steering knuckles, front axle, etc.). If the wheel alignment parameters change, it can lead to issues such as the steering wheel not returning to the center, heavy steering, steering pull, and tire wear.

10

5

Share

What is the reason for the continuous illumination of the yellow engine symbol light?

Engine fault yellow light continuously illuminated indicates that there is a fault in the car's engine. The specific reasons are as follows: 1. There may be an issue with the gasoline combustion or excessive engine carbon buildup causing poor combustion conditions, which could result in the yellow light staying on. In this case, it is necessary to promptly inspect the engine and take the vehicle to a repair shop for maintenance. 2. The engine's oxygen sensor is malfunctioning, causing the engine fault yellow light to illuminate. This situation does not affect the normal operation of the car; simply replace the oxygen sensor at a convenient time. 3. Problems such as clogged fuel injectors or carbon buildup in the intake valves trigger the fault light alarm. This may be due to dust entering the engine or poor fuel quality causing engine faults, leading to the yellow light coming on.

18

0

Share

How to Apply for a Vehicle Operating License?

What Causes the Engine Warning Light to Illuminate in a Tiida?

What could be the reason for a car's air conditioning suddenly failing to start?

What does it mean when ETC expires?

What are the new regulations for the second subject of the driving test in Guangdong?

Why Doesn't the Steering Wheel Return to the Center Position?

What is the reason for the continuous illumination of the yellow engine symbol light?

How to Deal with the ABS Light On?

Where is the air intake of BMW X3?

How many years does a car battery generally last before replacement?

What does engine cylinder scuffing mean?