How to Apply for a Vehicle License? Is It Issued When Buying a Car?

1 Answers
DiIsaac
07/29/25 11:14am
The vehicle license is not issued when purchasing a car; it is provided by the vehicle management office after the vehicle is registered. The process for applying for a vehicle license is as follows: Prepare the Required Documents: Local residents should prepare their original ID card and a copy. Non-local residents need to provide the original temporary residence permit and a copy. Registration and Vehicle Inspection: Drive the vehicle to the local vehicle management office for inspection by a designated traffic police officer. The engine number, vehicle model, emissions, and other details of the vehicle applying for the license will be inspected and verified. The inspection results will be compared one by one with the vehicle registration information and the owner's details. Selecting a License Plate: Generally, there are two ways to choose a license plate: one is random selection, which does not require additional fees, and the other is personalized selection, where you can choose your preferred numbers, but this incurs a cost.
Was this review help?
15
5
Share
More Forum Discussions

What is the speed at 2000 RPM?

Measuring speed by engine RPM is uncertain. It depends on the engine displacement. For a car with around 1.5L displacement, cruising at 2000 RPM on the highway generally corresponds to a speed of about 80-100 km/h, while turbocharged models may reach 100-120 km/h. For a 2.0L displacement vehicle, cruising at 2000 RPM can exceed 120 km/h, and for a 3.0L displacement car, it may reach 140-150 km/h at the same RPM. Here's additional information: The conversion relationship between engine RPM and vehicle speed is: Vehicle speed = Engine RPM × Current gear ratio × Wheel circumference. Higher engine RPM doesn't necessarily mean faster speed. For example, at the same 2000 RPM: in 1st gear, speed might be 15 km/h; in 2nd gear, about 25 km/h; in 3rd gear, approximately 40 km/h; and in 5th gear, around 80 km/h.
18
4
Share

Is there a big difference between paint jobs at auto repair shops and 4S stores?

There is not much difference, except that 4S stores charge higher fees. Here is some relevant information about car paint: 1. Advantages of car paint: The paint film has good fullness, high gloss, high hardness, and excellent adhesion. It possesses superior mechanical properties, outstanding gloss retention, weather resistance, and wear resistance, as well as good resistance to acids, alkalis, alcohol, and gasoline. 2. Classification of car paint: Car paint can generally be divided into solid paint, metallic paint, and pearl paint. Solid paint is the most basic type, usually in white and red, with a pure overall color. Metallic paint, based on solid paint, incorporates metal powders like aluminum and copper, giving the paint a more textured appearance. Pearl paint, on the other hand, is more dazzling and similar to metallic paint, but with the addition of mica particles that make it shine brilliantly under sunlight.
4
4
Share

What is the difference between turning one and a half turns and turning to the lock?

The steering wheel's one full turn has a larger turning amplitude than half a turn. Here is some extended information about the steering wheel: 1. Introduction: A wheel-shaped device used to control the direction of cars, ships, airplanes, etc. This new design of the steering wheel emerged as the times required, introducing a gear system between the driver and the wheels that operates flexibly and effectively isolates severe vibrations from the road. 2. Function: The steering wheel is generally connected to the steering shaft via splines, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a steering wheel with a larger diameter reduces the hand force required from the driver when turning. The steering intermediate shaft, as a connecting piece between the steering gear and the steering shaft, facilitates the standardization of the steering gear, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel on the vehicle more reasonable.
18
5
Share

What Causes a Car Roof to Leak?

It may be caused by a sunroof leak or failure of the car's waterproof sealant. Below is relevant information about sunroofs: 1. Functions of a Sunroof: It can rapidly cool down the car, eliminate fogging, and quickly exchange fresh air. Opening the sunroof while driving can swiftly increase the air circulation speed inside the car, thereby improving ventilation in the cabin. 2. Precautions for Sunroof Use: Open the sunroof in traffic jams to prevent exhaust fumes from entering the car. During traffic congestion, all vehicles are stationary, and exhaust fumes inevitably disperse in the air. Open the sunroof after exposure to sunlight to balance the interior temperature. In hot summers, after the car has been exposed to intense sunlight, the interior temperature becomes extremely high. At this time, the owner should promptly open the sunroof.
7
0
Share

Is the caf488wqe6 One of the Top Ten Globally?

caf488wqe6 is one of the top ten globally. Here is an introduction to the caf488wqe6: 1. Introduction: The caf488wqe6 engine originates from the UK and is an engine under the Ford company. 2. Engine: An engine is a machine that converts other forms of energy into mechanical energy, including transmission gear engines and rotating shafts, etc. The core part of the engine is the engine block, which forms the skeleton of the engine. The engine block must have sufficient strength and rigidity. It consists of the cylinder block, cylinder head, cylinder gasket, etc. The cylinder block is divided into general type, gantry type, and tunnel type. To properly cool the cylinder block, water cooling and air cooling methods are used. Water-cooled engines have cooling water jackets around the cylinders. The cooling water in the cylinder block and cylinder head is the same, continuously circulating within the water jacket to carry away some of the heat, thereby cooling the cylinders and cylinder head.
9
0
Share

What are the causes of CVT failure?

Here are the reasons for CVT failure: 1. Engine: Fluctuations in engine speed at idle, or engine stalling when shifting into gear. In this case, it is necessary to check the oil pressure of the forward clutch, the flow rate of the radiator, and the engagement and release oil pressure of the lock-up. If the measured oil pressure is too low, attention should be paid to the valve body and oil passages, such as using the vacuum test method to check the main pressure regulator valve hole in the valve body. If the oil pressure of the main chain wheel is too low, the main chain wheel control valve in the vacuum test should be checked. At this point, the valve body can be replaced or individual valve holes can be repaired, mainly depending on the cost. 2. Torque converter without lock-up: This is related to the lock-up oil circuit of the torque converter, and it is necessary to check the lock-up oil pressure and lock-up release oil pressure. 3. Hydraulic noise at idle: Check the release oil pressure of the torque converter lock-up clutch.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.