How to apply for a same-day Beijing Entry Permit?

What are the impacts on China V vehicles after the implementation of the China VI standard?

There may be a possibility of not being able to register the vehicle. Below is more information about China V vehicles: 1. Reason: If the owner privately modifies China V or below standard motor vehicles, it will violate the relevant regulations of the public security department on vehicle management. 2. Consequence: China V standard vehicles modified to China VI standard cannot normally complete the registration procedures. 3. China V vehicles: China V vehicles are those that comply with the 'National Fifth Stage Motor Vehicle Pollutant Emission Standards'. 4. China VI vehicles: The symbol for China VI is 'VI'. China has already promulgated the China VI automotive emission standard, dividing it into two phases: China VIa and China VIb. The China VIa phase was officially implemented in 2020, and the China VIb phase will be officially implemented in 2023.

3

1

Share

How to activate the horn when locking the Octavia?

The method to activate the horn when locking the Octavia is: The original vehicle cannot set this function, it needs to be activated using 5053, which is commonly referred to as enabling hidden features. Relevant information about the Octavia is as follows: 1. Configuration: The Octavia uses a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 113ps, maximum power of 83kw, maximum torque of 145nm, and is paired with a 5-speed manual transmission. 2. Dimensions: The Octavia has a length, width, and height of 4675mm, 1814mm, and 1460mm respectively, with a wheelbase of 2686mm. It is equipped with a 5-speed manual transmission and has a top speed of 185 kilometers per hour.

19

1

Share

What is the wheelbase length of the Volvo S80L?

The wheelbase length of the Volvo S80L is 2976 millimeters. The Volvo S80L is a mid-to-large luxury sedan with an extended wheelbase. The vehicle's length, width, and height are 4991 millimeters, 1861 millimeters, and 1490 millimeters respectively. The Volvo S80L is equipped with three types of engines: a 2.0-liter turbocharged engine, a 2.5-liter turbocharged engine, and a 3.0-liter turbocharged engine. The 2.0-liter turbocharged engine delivers 214 horsepower and a maximum torque of 300 Nm, with a maximum power speed of 6000 rpm and a maximum torque speed ranging from 2700 to 5000 rpm. The 2.5-liter turbocharged engine produces 200 horsepower and a maximum torque of 300 Nm, with a maximum power speed of 4800 rpm and a maximum torque speed ranging from 1500 to 4500 rpm. The 3.0-liter turbocharged engine generates 305 horsepower and a maximum torque of 440 Nm, with a maximum power speed of 5600 rpm and a maximum torque speed ranging from 2100 to 4200 rpm.

3

4

Share

What tires are used in the Volkswagen Lavida 2017 model?

Hankook OPTIMO k415 is the tire used in the 2017 Lavida model, with the tire size being 205/55R16. Hankook Tire was established in 1941. After more than 70 years of development, Hankook Tire has expanded its business globally through continuous innovation and exploration. In addition to its global headquarters in Korea, Hankook Tire has three regional headquarters (China, Europe, and the Americas) and overseas subsidiaries and branches in 30 countries. Hankook Tire entered China in 1996 and established two production bases in Huaian, Jiangsu, and Jiaxing, Zhejiang. In 1998, Hankook Tire set up its China Technical R&D Center in Jiaxing, Zhejiang. Hankook Tire has 15 sales branches and 4 logistics centers in China. Its consistently high-quality products have made Hankook Tire a leader in China's passenger car tire market, supplying tires to more than 30 automakers, including Mercedes-Benz, BMW, Audi, FAW-Volkswagen, Shanghai Volkswagen, and Beijing Hyundai. When using Hankook tires in daily life, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread wears out completely, the tire will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Even small cracks can pose a risk of tire blowouts at high speeds. Additionally, promptly remove stones stuck in the grooves; try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, do not turn the steering wheel, as this can accelerate tire wear; do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, and tire pressure may increase. In such cases, stop to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber; avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear due to dragging on the road.

20

1

Share

What Causes Low Oil Pressure in Sedans?

Low oil pressure is generally caused by the following reasons: insufficient oil volume; excessively high engine temperature; malfunction of the oil bypass valve; clogged oil filter. Different causes require different solutions. The reasons for low oil pressure and their corresponding solutions include: 1. Insufficient engine oil storage: This leads to little or no oil in the lubrication system, resulting in low oil pressure. Solution: Add oil. 2. Dirty oil: Dirty or viscous oil prevents the oil pump from effectively sucking in and pumping out oil, causing low or no oil pressure. Solution: Change the oil. 3. Thin oil: High engine temperature may thin the oil, causing it to leak through the gaps in the engine's friction pairs and resulting in low oil pressure. Solution: Change the oil or repair the cooling system. 4. Oil pipe leakage: Damage to the oil pump or excessive wear of its components can reduce or completely stop the suction and pumping of oil, leading to low or no oil pressure. Solution: Repair.

19

3

Share

How to Solve the Jerking Sensation in Automatic Cars?

The cause of the jerking sensation in automatic cars is related to the transmission oil. Below are the relevant explanations for the causes of jerking in automatic cars: 1. Internal clutch pressure leakage in the transmission: Check if the clutch is damaged and repair it. 2. Blockage or poor flow in the transmission oil circuit: Wear in the oil circuit plate, long-term lack of transmission oil change leading to deterioration and reduced lubrication effect, dirty transmission filter causing poor filtration, allowing wear particles to enter the valve body. 3. Insufficient or excessive transmission oil: Confirm if the transmission oil is at the standard level. Both insufficient and excessive transmission oil can cause this issue. For vehicles with a transmission oil dipstick, check if the oil level is at the standard mark when the vehicle is running. 4. Damaged solenoid valve: Sludge in the transmission oil can cause jerking issues, which may lead to a series of transmission problems such as overheating, impact, and slipping over time.

13

1

Share

How to apply for a same-day Beijing Entry Permit?

What are the impacts on China V vehicles after the implementation of the China VI standard?

How to activate the horn when locking the Octavia?

What is the wheelbase length of the Volvo S80L?

What tires are used in the Volkswagen Lavida 2017 model?

What Causes Low Oil Pressure in Sedans?

How to Solve the Jerking Sensation in Automatic Cars?

What is the appropriate tire pressure for an Audi Q3?

Is the Volvo S90 Rear-Wheel Drive or Front-Wheel Drive?

Does the 2019 Touareg 380 Luxury model not have USB ports?

What engine is used in the Volvo S80L?