How to Apply for a Rescue Certificate for a Private Car?

How to reset the sunroof of Roewe RX5?

The method to reset the sunroof of Roewe RX5 is: operate the sunroof button on the roof console to rotate and reset it. However, during normal use, be sure not to switch it on and off frequently to prevent damage to the motor. The Roewe RX5 is a compact SUV under SAIC Roewe, with a length, width, and height of 4556 mm, 1855 mm, and 1719 mm respectively, and a wheelbase of 2708 mm. In terms of power, the Roewe RX5 is equipped with a 1.5L turbocharged engine and a 2.0L turbocharged engine. The 1.5L version has a maximum horsepower of 169 hp, a maximum power of 124 kW, and a maximum torque of 250 Nm.

20

5

Share

What kind of tires does the Nissan Teana use?

Nissan Teana mainly uses Michelin PrimAcy LC or Bridgestone E150 brand tires. The original tires for the new Teana are BluEarth E75, a tire model heavily promoted by Yokohama in the domestic market, known for its quiet comfort and fuel efficiency. The Nissan Teana is a premium mid-to-high-end luxury sedan under the Nissan brand, with dimensions of 4868 mm in length, 1830 mm in width, and 1490 mm in height, and a wheelbase of 2775 mm. In terms of exterior design, the Teana features sharply angled headlights, with the arc of the integrated body bumper rising from both sides to the outer edges of the headlights, then naturally extending from the edges of the headlights to form a smooth waistline that runs from front to rear.

3

0

Share

Is It Serious If There's a Banging Sound When Turning the Steering Wheel Too Hard?

Is It Serious If There's a Banging Sound When Turning the Steering Wheel Too Hard? It is not serious if there's a banging sound when turning the steering wheel too hard. Below are the reasons for the banging sound from the steering wheel: 1. Plastic components causing noise: The steering wheel is usually made of plastic components, which can harden when the temperature drops, increasing the likelihood of friction noise. 2. Steering wheel causing noise: The clock spring inside the steering wheel is prone to causing noise. When the steering wheel ages, the clock spring should be replaced promptly. Note that the airbag fuse should be removed to prevent the airbag from deploying. 3. Aging of the tie rod end ball joint: When the tie rod end ball joint ages, it may cause noise. The tie rod end ball joint should be replaced promptly, and a four-wheel alignment should be performed after replacement.

19

2

Share

How to Determine the Size of Wiper Blades?

The method to check the size of wiper blades: Simply measure the length of the rubber strip of the wiper blade with a ruler. Common sizes for car wiper blades are as follows: 14 inches equals 350 millimeters, 15 inches equals 375 millimeters, 16 inches equals 400 millimeters, 17 inches equals 425 millimeters, 18 inches equals 450 millimeters, 19 inches equals 475 millimeters, 20 inches equals 500 millimeters, 21 inches equals 525 millimeters, etc. Wiper blades, technically known as windshield wipers, are blade structures installed in front of the windshield. They consist of an electric motor, a reducer, a four-bar linkage mechanism, a wiper arm spindle, and a wiper blade assembly. Their primary function is to remove rain, snow, and dust that obstruct visibility on the windshield.

1

Share

Why does an Audi suddenly shift to S gear while driving?

Audi suddenly shifting to S gear while driving is due to the car being set in dynamic mode, which automatically switches to S gear. Below is an introduction to car gear-related content: Introduction to car gears: Car gears usually consist of D gear, R gear, P gear, N gear, and S gear. Among them, D gear is the drive gear, R gear is the reverse gear, P gear is the parking gear, N gear is the neutral gear, and S gear is the sport gear (for models equipped with sport mode). Precautions for gear usage: The vehicle must be completely stopped before using P gear, otherwise the mechanical part of the automatic transmission may be damaged. When parking and not in use, the gear should be in this position, where the wheels are mechanically locked, and combined with the handbrake, it can prevent the car from rolling.

15

4

Share

Where is the engine number of the Volkswagen Polo located?

The engine number of the Volkswagen Polo is located on the side wall of the engine block. You can see the engine number by opening the car's hood. Additionally, the engine number is also listed on the vehicle's registration certificate. The exact location of the engine number may vary depending on the model. Taking the 2019 Volkswagen Polo as an example, its body dimensions are: length 4053mm, width 1740mm, height 1449mm, with a wheelbase of 2564mm. The 2019 Volkswagen Polo features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113PS, a maximum power of 83kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.

4

2

Share

How to Apply for a Rescue Certificate for a Private Car?

How to reset the sunroof of Roewe RX5?

What kind of tires does the Nissan Teana use?

Is It Serious If There's a Banging Sound When Turning the Steering Wheel Too Hard?

How to Determine the Size of Wiper Blades?

Why does an Audi suddenly shift to S gear while driving?

Where is the engine number of the Volkswagen Polo located?

Does Car Polishing Damage the Paint?

Where is the cabin air filter located in a Corolla?

What is the time limit for the Subject 2 driving test?

Is the Ora Good Cat a Domestic Car?