···
Log in / Register

How to Apply for a Driving License Refund?

4 Answers
StAngelina
07/29/25 6:28pm

Visit the driving school where you registered to process the refund. The refund standards are as follows: 1. Failed medical examination: If you did not attend or failed the medical examination after registration and request a withdrawal, the service fee will be deducted. 2. Did not apply for the exam: If you passed the medical examination and obtained the driving school student status but did not apply for the exam scheduling and request a withdrawal, the file setup and service fees will be deducted. 3. Did not take the subject one exam: If you have applied for the subject one exam scheduling at the driving management office and attended the theoretical training organized by the driving school but did not take the subject one exam and request a withdrawal, the file setup, service fees, and theoretical training fees will be deducted. 4. Failed subject one exam: If you failed the subject one exam and request a withdrawal, the file setup, service fees, and theoretical training fees will be deducted. 5. After on-car training: If you passed the subject one exam and request a withdrawal after on-car training, in addition to the file setup, service fees, and theoretical training fees, the actual on-car training fees will be deducted based on the training hours (calculated according to the IC card timing).

Was this review help?
14
2
Share
JuniperMarie
08/14/25 11:24am

I once had to apply for a driving license refund due to a job transfer, and the process went relatively smoothly. The driving school I enrolled in required me to first fill out a refund application form at the front desk, bringing my ID card and the original payment receipt. After their review, they deducted the cost of the classes I had already taken and refunded about 70% of the money, explaining that the remaining amount included service and administrative fees. It took half a month for the refund to be processed, and during that time, I took photos and kept copies of all the documents as backups. I recommend you handle this as soon as possible—contact the driving school immediately after withdrawing, as having all the necessary documents ready can speed up the process. Check the refund ratio in your contract, as it varies significantly between driving schools—some offer full refunds while others only refund half. Don’t wait until just before the exam to apply, as the deductions will be higher. Acting early can save you a lot of trouble.

Was this review help?
12
2
Share
Expand All
JeffreyFitz
10/14/25 6:18am

Let me draw an analogy - getting a driving license refund is as straightforward as returning an online purchase. Contact the driving school's front desk or customer service, explain your situation, and request to fill out a formal refund application form. Prepare copies of your ID card and registration receipt for submission—they'll calculate and deduct fees for consumed lessons. Typically, the refund is processed via bank transfer within one to two weeks; keep the receipt handy in case of discrepancies. From my experience, carefully reviewing contract terms helps avoid hidden charges—some schools refund most fees if you withdraw early. If encountering delays, refer to consumer protection laws for support, though most driving schools follow standardized procedures without major issues. Always verify the refund amount upon receipt to prevent disputes.

Was this review help?
17
4
Share
Expand All
SanGrant
11/27/25 7:13am

Refunds mainly depend on fee deductions, don't lose money. Before enrolling in a driving school, I closely examined the contract's refund ratio, such as only getting 60% back after one lesson. When applying, bring your ID and receipt to fill out the form. After review, they usually deduct service fees and the cost of lessons taken. Refund early to minimize losses; delaying might result in no refund at all. Keep document copies to prevent disputes, and verify that deductions are reasonable to avoid overcharging. When choosing a driving school, check reviews and look for refund-friendly policies to save both hassle and money.

Was this review help?
13
0
Share
Expand All
More Forum Discussions

What is the prescribed service life for private cars?

Private cars have a prescribed service life: mandatory scrapping after the vehicle has traveled 600,000 kilometers. Based on the current mainstream usage of private cars in China, family cars generally average 20,000 kilometers per year, with some driving as little as 10,000 kilometers per year and others as much as 30,000 kilometers per year. The service life of a private car is calculated from the date of vehicle registration. If registration is not completed within two years from the date of manufacture, the service life is calculated from the date of manufacture. For small and micro rental passenger cars and motorcycles, relevant departments of the provincial, autonomous region, and municipal governments may adjust the regulations based on local conditions.
11
4
Share

Can I Use a Temporary License Plate If I Already Have a License Plate?

You cannot use a temporary license plate if you already have a license plate. A temporary license plate is a temporary vehicle travel certificate issued by the vehicle management department of the public security bureau for newly purchased vehicles before they are officially registered. A temporary license plate is a paper vehicle license plate temporarily applied for motor vehicle travel, allowing the vehicle to be driven on the road temporarily, with a validity period generally not exceeding 30 days. According to relevant regulations, if a motor vehicle driven on the road does not display a motor vehicle license plate, does not have an inspection qualification mark or insurance mark, or does not carry the vehicle registration certificate and driver's license, the traffic management department of the public security organ shall detain the motor vehicle and notify the party to provide the corresponding license plate and marks or complete the relevant procedures.
15
3
Share

How to Shift Gears in a Wrangler 4WD?

The method for shifting gears in a Wrangler 4WD is: 1. When off-roading, first shift the right lever to N (Neutral); 2. Then shift the left lever to engage the 4WD mode. The Wrangler features two transmission levers—one for regular gear shifting and the other specifically for 4WD. The left lever controls the part-time 4WD system, while the right lever handles standard gear shifting. The Wrangler is an SUV with body dimensions of 4751mm in length, 1877mm in width, and 1840mm in height. In terms of power, it is equipped with a 392 HEMI V8 engine capable of delivering 485 horsepower, paired with an 8-speed automatic transmission.
3
4
Share

What is the reason for the yellow light in the Malibu?

The reason for the yellow light in the Malibu is: a fault in the fuel rail pressure sensor or the throttle position sensor. It is recommended to go to a 4S store or a professional repair shop for inspection, and use professional automotive diagnostic equipment to check the fault code. There are two types of warning lights: yellow and red. A yellow warning indicates that there is a problem with the car, which requires immediate maintenance at a 4S shop or repair shop, or servicing of related components. A red warning indicates a serious fault in the warning part, which requires immediate repair. The Malibu is a mid-size car with body dimensions of 4859mm in length, 1854mm in width, and 1463mm in height, and a wheelbase of 2738mm. In terms of suspension, the Malibu has a MacPherson front suspension and a multi-link rear suspension.
20
5
Share

What documents are required to apply for a Beijing entry permit?

To apply for a Beijing entry permit, you need to bring the vehicle license, driver's license, and compulsory traffic insurance policy. Below is relevant information about the Beijing entry permit: 1. Introduction: The Beijing entry permit refers to a temporary pass required for non-Beijing licensed vehicles entering within the 6th Ring Road (excluding) of Beijing and certain sections outside the 6th Ring Road, with a validity period of 7 days. 2. Prohibited vehicle types: The traffic control measures for non-Beijing vehicles entering the capital do not apply to the following 5 categories of non-Beijing vehicles: Non-Beijing vehicles holding special passes for the National "Two Sessions"; Non-Beijing vehicles directly serving the "Two Sessions" (allowed to enter designated areas); Freight vehicles transporting fresh food such as meat, eggs, vegetables, and milk; Vehicles for special circumstances like transporting critically ill patients; Non-Beijing police cars and ambulances entering Beijing for official duties.
9
2
Share

What is the tire pressure for Passat?

The normal tire pressure range for Passat is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data complies with the international GBT2978-2008 standard. The Volkswagen Passat is equipped with a tire pressure monitoring system, and the tire pressure value will be displayed on the information screen in the center of the dashboard. Generally speaking, a tire pressure exceeding 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern of the tire, shortening tire lifespan; increased body vibration, indirectly affecting the lifespan of other components; excessive stretching deformation of tire cords, reducing tire elasticity, increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, which are unfavorable for driving safety; increased movement of various parts of the tire, leading to abnormal heat generation due to excessive rolling; reduced functionality of cords and rubber, causing delamination or cord breakage, excessive friction with the rim, resulting in damage to the bead area and abnormal wear; multiplied friction between the tire and the ground, sharply rising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no seal on top and four small spikes below, with an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, an alarm is triggered when the pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the previous data, which triggers the tire pressure monitoring indicator light. In this case, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to come on. For sensor damage issues, only a new replacement part can be used.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.