How to Apply Car Window Tint Film?

[DiMargaret]

Detailed steps for applying car window tint film: 1. Before applying the film, first ensure that the working environment meets the requirements of being dry and dust-free. Otherwise, dust and debris entering during the process will affect the film application. It is recommended to wash the car before applying the film. 2. Cover necessary parts of the vehicle. Both the interior and exterior should be protected with covers. If specialized materials are not available, cling film can be used as an alternative. 3. Clean the car glass where the film will be applied. Pay special attention to the top and edges of the glass, then dry it thoroughly. 4. Next, cut the film to size, ensuring it matches the dimensions of the glass. Spray a small amount of water on the glass surface, then adhere a plastic film of a certain thickness to the window. Trace the edges to create a template, which can slightly exceed the glass size. 5. When applying film to the front and rear windshields, a heat gun is required for shaping. Place the cut film on the exterior side of the glass and use a heat gun to shape it. This step is crucial and prone to errors, as the temperature of the heat gun and shaping technique require precision. Improper use can easily lead to the film becoming scorched or the glass cracking. 6. After shaping the film, proceed with the actual application. Spray clean water or window film installation solution on the interior side of the glass, then remove the innermost plastic layer of the film and apply it to the interior glass, adjusting it to the optimal position. 7. Spray a small amount of water or window film installation solution on the surface of the film, then use a long triangular plastic squeegee to remove excess water. If such a tool is not available, unused hard cards (such as credit cards or membership cards) can serve as substitutes. 8. After removing the water, check for bubbles, secure adhesion, wrinkles, or scratches between the film and the glass. If no issues are found, finally clean the edges of the glass with a towel to remove any remaining water.