How to align the vehicle for the roadside parking in Subject 3?

2 Answers
LaBryce
09/08/25 8:37am
The vehicle is more than 30cm but not exceeding 50cm from the right edge of the road or the sidewalk edge, 10 points will be deducted. If the distance exceeds 50cm, it will be changed from a 10-point deduction to a failure. Below are the specific steps: Step 1: Upon hearing the instruction for roadside parking, first determine the parking position, then turn on the right turn signal for at least three seconds, perform a head-check action, and turn the steering wheel 90 degrees to the right. Step 2: When the middle of the front of the car aligns with the curb, quickly turn the steering wheel to the left by more than 180 degrees. Step 3: When one-third of the front of the car aligns with the curb, straighten the steering wheel and observe the right rearview mirror. If the car deviates, keep adjusting slightly to maintain the one-third alignment. Step 4: When the car body is parallel to the curb, park the car at a distance of 10 to 30cm from the curb. Ensure this distance is accurately determined.
Was this review help?
5
5
Share
SawyerDella
09/20/25 6:58am
I remember during the parallel parking test in driving license exam (Subject 3), I mainly relied on observing the right rearview mirror to control the distance between the car body and the roadside yellow line. The standard distance is about 30 centimeters. During practice, I often used my fist as a reference - when the gap between the tire and the yellow line appeared about one fist width in the mirror, the car was almost properly aligned. The reference point needs to be coordinated with speed: first decelerate and turn on the right turn signal, slowly approach the curb while steering and glancing at the mirror - don't rush to stop completely. When I took the test as a beginner, I made the mistake of relying too much on memorized reference points when nervous, forgetting actual road conditions. Later I realized that in rain or poor visibility, visual references can be misleading, and it's more reliable to rely on feel and feedback from the car's vibrations. During practice, having a friend stand outside to observe the distance and correct my errors helped me develop good habits quickly. Proper parking isn't just about stopping at the right position - you must also shift to neutral and engage the handbrake after stopping to satisfy the examiner. Practicing in various weather conditions and improving mental preparedness will naturally lead to more accurate reference point judgment.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Which factory produces Yadu tires?

Yadu is produced by Zhongce Rubber Group Co., Ltd. Zhongce Rubber Group is a well-known tire manufacturer in China. Here is some relevant information: 1. Introduction: Zhongce Rubber Group was established in 1958 and is currently one of China's relatively large tire manufacturers. It owns multiple tire brands, including Chaoyang tires, Goodride tires, Westlake tires, Arisun tires, and Yadu tires. Currently, among domestic tires, Zhongce's tire quality is relatively good. 2. Performance: SSBR can meet automotive performance requirements, with tire wet grip and rolling resistance performance reaching EU standards of Class B and Class C. Therefore, Zhongce's tires are not inferior to imported tires in the same price range.
9
2
Share

What does it mean when the dashboard STOP light is on?

The dashboard STOP light is a mandatory parking warning light. Below is an introduction to related indicator lights: 1. Battery indicator light: Displays the working status of the battery. It lights up when the ignition is turned on and turns off after the engine starts. If it does not light up or remains lit continuously, the generator and circuit should be checked immediately. 2. Fuel indicator light: Indicates insufficient fuel. When this light comes on, it means the fuel is nearly depleted. Generally, the vehicle can still travel about 50 kilometers from the time the light comes on until the fuel is completely exhausted. 3. Washer fluid indicator light: Shows the level of the windshield washer fluid. If the washer fluid is nearly depleted, this light will illuminate, reminding the owner to add washer fluid promptly. The indicator light will turn off after adding cleaning fluid.
20
3
Share

What level of car typically has a 300 mph speedometer?

Basically, any performance car or sports car will have a speedometer that goes up to 300 mph or more. Below is some relevant information about car dashboards: 1. Introduction to car dashboards: With advancements in electronic technology and the emergence of new sensors and electronic display components, electronic dashboards have been rapidly adopted in vehicles. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. 2. Function of car dashboards: The car dashboard displays the working conditions of various vehicle systems, allowing real-time monitoring of the car's status and providing drivers with necessary operational parameters. It serves as a crucial interface for communication between the driver and the vehicle.
14
3
Share

What is the reason why the dashboard door light is always on?

When the dashboard door light is always on, it indicates that the door is not properly closed. The door has two locks; if you close it gently, only the first lock is engaged. If you don't close it firmly, the indicator light will remain on. Here is some relevant information about car doors: 1. Design requirements: Ensure ease of entry and exit for passengers, with the maximum opening angle controlled at around 65° to 70°. During the opening process, the door should not interfere with other parts. When closed, the door must be securely locked to prevent it from opening while driving. 2. Definition: The car door provides access for the driver and passengers, isolates external interference, reduces side impacts to some extent, and protects the occupants. The aesthetics of the car are also related to the design of the door.
1
1
Share

What does a triangle with an exclamation mark in a car mean?

A triangle with an exclamation mark inside indicates a malfunction in the car's regular performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark indicators: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow horizontal line with parentheses and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant below the normal range. The transmission oil should be replaced promptly. Braking system fault: A circle with parentheses and an exclamation mark in the middle represents a braking system warning, mainly indicating a braking system malfunction or low brake fluid level. The braking system should be inspected immediately to avoid accidents. Tire pressure anomaly: A horizontal line with parentheses and an exclamation mark in the middle represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating a malfunction in one of the car's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or check yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
13
5
Share

What to Do If You Have a Driver's License but Don't Drive?

New drivers often feel nervous about driving after obtaining their license. There is no perfect solution to this situation except consistent practice. Precautions for new drivers: 1. Try to have an experienced driver accompany you; avoid driving alone. 2. Familiarize yourself with the functions of all buttons in the car, especially the horn, lights, and gearshift. 3. Choose familiar routes when driving. 4. Adjust your seat to a comfortable position and avoid frequently switching cars. 5. Maintain a calm mindset while driving; stay composed in unexpected situations. 6. Practice in empty areas whenever possible—practice makes perfect. 7. Follow traffic rules, drive cautiously, and prioritize safety.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.